概要
ソリューション
HW評価ツール
リソース
ツール & ソフトウェア
主要製品
Get Started

POS端末は、ISO/IEC 7816(シリアル)、ISO/IEC 14443(非接触および磁気ストライプ読出し)など、実証済みの規格のいずれかを使用してデビット・カードやクレジット・カード上の情報を読み取り、銀行のサーバに接続して取引を登録することにより、セキュアな決済取引を可能にします。

ポータブルePOS端末は、ベースや銀行に接続するためにワイヤレス通信(通常、Bluetooth® Low Energy(BLE)、Wi-Fi、またはセルラー)を必要とします。 

ePOS端末は、EMVCoレベル1/レベル2、決済カード業界のデータ・セキュリティ基準(PCI-DSS)、および該当する場合は中国人民銀行(PBOC)の基準や米国連邦通信委員会(FCC)などの取引に関する認定基準やその他の規制に適合する必要があります。

STは、高感度と優れたアンテナ適応性により認定取得に必要な作業を大幅に軽減できるNFCリーダST25Rや、Bluetooth® Low Energy通信ソリューションなど、非接触カード取引向けの各種ソリューションを提供しています。さらに、Qi準拠のワイヤレス充電チップセットをはじめとするパワー・マネージメント・ソリューションも提供しています。

推奨製品

製品型番
概要
X-NUCLEO-IDB05A1 Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo Quick view

主な特徴

  • STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo
  • X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF)
  • SPBTLE-RF:
    • Bluetooth Low Energy FCC and IC certified module based on Bluetooth® SMART 4.1 network processor BlueNRG-MS
    • Integrated Balun (BALF-NRG-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
NUCLEO-F429ZI STM32 Nucleo-144 development board with STM32F429ZI MCU, supports Arduino, ST Zio and morpho connectivity Quick view

主な特徴

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including Arduino™ Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
X-NUCLEO-IHM13A1 Low voltage brush DC motor driver expansion board for STM32 Nucleo based on the STSPIN250 Quick view

主な特徴

  • Low voltage range from 1.8 V to 10 V
  • Current up to 2.6 A r.m.s.
  • Current control with adjustable off-time
  • Full overcurrent and short circuit protection
  • Thermal shutdown
  • Compatible with Arduino UNO R3 connector
  • Compatible with STM32 Nucleo boards
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-OET004V1 USB Type-C protection and filtering demo PCB Quick view

主な特徴

  • Protection of all lines (data, control and power)
  • Common mode filters for USB 2.0 and USB 3.1 lines on STEVAL-OET004V1D
  • Plug and receptacle enabling insertion of the PCB between host and cable or device and cable

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
ST25R3911B-DISCO Discovery kit for ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, VHBR and AAT Quick view

主な特徴

  • Based on ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, supporting VHBR and AAT
    • ISO 18092 (NFCIP-1) active P2P
    • ISO14443A, ISO14443B and FeliCa™
    • ISO15693
    • Supports VHBR (3.4 Mbit/s PICC to PCD framing, 6.8 Mbit/s AFE and PCD to PICC framing)
    • Up to 1.4 W output power with differential antenna
    • Possibility of driving two antennas in single ended mode
    • Inductive and capacitive Wake-up
    • Automatic antenna tuning system
    • DPO (Dynamic Power Output)
    • User selectable and automatic gain control
    • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
    • 6 Mbit/s SPI
    • Wide supply voltage range (from 2.4 V to 5.5 V)
    • QFN32, 5 mm x 5 mm package
  • STM32L476RET6 32-bit microcontroller with 512 kB of Flash memory
  • 105 mm x 52 mm, two turns antenna etched on the PCB, and associated VHBR tuning circuit
  • Micro-USB connector for communication with the host PC and board powering
  • Six LEDs indicating the presence of the RF field and of the protocol used to communicate

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
X-NUCLEO-NFC05A1 NFC card reader expansion board based on ST25R3911B for STM32 and STM8 Nucleos Quick view

主な特徴

  • On-board NFC card reader IC: ST25R3911B
  • 47 mm x 34 mm, four turns, 13.56 MHz inductive antenna etched on PCB and associated tuning circuit
  • Six general purpose LEDs
  • ISO 18092 (NFCIP-1) active P2P
  • ISO 14443A and ISO14443B
  • ISO 15693
  • FeliCa™
  • VHBR
    • 6.8 Mbit/s AFE and PCD to PICC framing
    • 3.4 Mbit/s PICC to PCD framing
  • Up to 1.4 W output power with differential antenna
  • Possibility of driving two antennas in single ended configuration
  • Inductive and capacitive wake-up
  • Automatic antenna tuning system
  • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
  • Equipped with Arduino™ UNO R3 connector
  • Free comprehensive development firmware library compatible with STM32Cube and samples for ST25R3911B
  • Scalable solution for multiple board cascade
  • FCC certified
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ISB042V1 Dual mode wireless power evaluation board for Qi and Airfuel inductive receiver and Qi-based transmitter with STWLC33 Quick view

主な特徴

  • STWLC33 evaluation board with Würth Elektronik dual mode coil (760308102207)
  • Qi 1.2 compliant, supporting extended power profile: up to 15 W/10 V maximum output power
  • Backward compatible with Qi baseline power profile: up to 5 W/5 V maximum output power
  • PMA-SR1 (AirFuel inductive) compliant: 5 W/5.6 V maximum output power
  • Transmitter function based on Qi protocol to charge wearable devices using the same Rx coil (up to 3 W power)
  • Total system efficiency up to 80%
  • Configurable GPIOs for status indication
  • I²C interface for communication with the host system
  • Foreign object detection (FOD)
  • Complete kit (IC, firmware)
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-POE002V1 5V/8A, synchronous flyback converter, Power over Ethernet (PoE) IEEE 802.3bt compliant reference design Quick view

主な特徴

  • PM8805 4-pair IEEE 802.3bt compliant PD interface
  • Works with power supplied from Ethernet LAN cables or local auxiliary sources
  • Line input voltage range: 40 to 60 VDC
  • Output stage managed by configurable PM8804 controller
  • Output voltage: 5 VDC ±2.5%
  • Output current: 8 A
  • Peak-to-peak output ripple: <50 mV
  • DC-DC full load efficiency: >91%
  • Overall full load efficiency: >90%
  • Transient response ΔV pk-pk 100% to 50% load step ≈ 700 mV
  • Switching frequency ≈ 280 KHz

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
ST25R3911B-EMVCO EMVCo reference design for the ST25R3911B high performance HF reader Quick view

主な特徴

  • Based on ST25R3911B high performance HF reader with 1.4 W output power
    • ISO14443A, ISO14443B (more protocols supported on ST25R3911B-DISCO kit)
    • Up to 1.4 W output power with differential antenna
    • DPO (Dynamic Power Output)
    • User selectable and automatic gain control
    • QFN32, 5 mm x 5 mm package
  • STM32L476 32-bit microcontroller with 1 Mbyte of Flash memory
  • 65 mm x 74 mm, two turn antenna etched on the PCB
  • Micro-USB connector for communication with the host PC and board supply
  • Integrated ST-LINK/V2 for programming and debugging of the STM32L476
  • 2.4 inch resistive touch TFT connected in 16 bit parallel mode
  • S-Touch controller
  • Comprehensive Device Test Environment (DTE) for control of the EMVCo Level 1 firmware

さらに表示

画像

Image
Image
STEVAL-ISB044V1 Qi MP-A10 15 W wireless charger TX evaluation kit based on STWBC-EP Quick view

主な特徴

  • STWBC-EP digital controller
  • 15 W output power
  • Qi MP-A10 reference design
  • WPC Qi1.2.3 standard compliant
  • Robust demodulation algorithm, with triple path (V, I, f)
  • Foreign object detection (FOD)
  • Accurate power control
  • Active presence detection
  • UART protocol to control and monitor the system
  • Complete reference design (evaluation board, IC, firmware and tools)
  • 2-layer PCB for easy design
  • Flash memory-based
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-POE003V1 5V/20A, active clamp forward converter, Power Over Ethernet (PoE) - IEEE 802.3bt compliant reference design Quick view

主な特徴

  • Features of PM8805 PoE-PD interface
    • System in package integrating a double active bridge, hot-swap MOSFET and PoE-PD interface
    • PoE-PD single-signature interface compliant with IEEE 802.3bt
    • Detection and support of high power 4-pair applications
    • 100 V N-Ch MOSFETs with 0.2 Ω total path resistance for each active bridge
    • Identifies which kind of PSE (standard or legacy) it is connected to and provides successful IEEE802.3.af/at/bt classification indication through a combination of the T0, T1 and T2 signals (open drain)
    • VFQFPN43 8x8 mm with 6 exposed pads
  • Features of PM8804 PWM controller
    • PWM peak current mode controller
    • Input operating voltage up to 75 V
    • Internal high voltage start up regulator with 20 mA capability
    • Programmable fixed frequency up to 1 MHz
    • Soft start up with settable time
    • Soft turn off (optionally disabled)
    • Dual 1Apk, low side complementary gate drivers
    • GATE2 optionally turned off for reduced consumption
    • 80% maximum duty cycle with internal slope compensation
    • VFQFPN 3.0x3.0x1.0 16L 0.5 mm pitch
  • WEEE compliant
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
NUCLEO-F439ZI STM32 Nucleo-144 development board with STM32F439ZI MCU, supports Arduino, ST Zio and morpho connectivity Quick view

主な特徴

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including Arduino™ Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ISB045V1 2.5 W wireless charger transmitter evaluation kit Quick view

主な特徴

  • STWBC-WA digital controller
  • 2.5 W output power
  • Resistive and capacitive modulation
  • Foreign object detection (FOD)
  • Active presence detector
  • Turn-key and firmware APIs
  • Total reference design (IC, firmware, GUI and dongle)

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
製品型番
X-NUCLEO-IDB05A1

Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo

主な特徴

  • STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo
  • X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF)
  • SPBTLE-RF:
    • Bluetooth Low Energy FCC and IC certified module based on Bluetooth® SMART 4.1 network processor BlueNRG-MS
    • Integrated Balun (BALF-NRG-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
NUCLEO-F429ZI

STM32 Nucleo-144 development board with STM32F429ZI MCU, supports Arduino, ST Zio and morpho connectivity

主な特徴

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including Arduino™ Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
X-NUCLEO-IHM13A1

Low voltage brush DC motor driver expansion board for STM32 Nucleo based on the STSPIN250

主な特徴

  • Low voltage range from 1.8 V to 10 V
  • Current up to 2.6 A r.m.s.
  • Current control with adjustable off-time
  • Full overcurrent and short circuit protection
  • Thermal shutdown
  • Compatible with Arduino UNO R3 connector
  • Compatible with STM32 Nucleo boards
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-OET004V1

USB Type-C protection and filtering demo PCB

主な特徴

  • Protection of all lines (data, control and power)
  • Common mode filters for USB 2.0 and USB 3.1 lines on STEVAL-OET004V1D
  • Plug and receptacle enabling insertion of the PCB between host and cable or device and cable

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
ST25R3911B-DISCO

Discovery kit for ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, VHBR and AAT

主な特徴

  • Based on ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, supporting VHBR and AAT
    • ISO 18092 (NFCIP-1) active P2P
    • ISO14443A, ISO14443B and FeliCa™
    • ISO15693
    • Supports VHBR (3.4 Mbit/s PICC to PCD framing, 6.8 Mbit/s AFE and PCD to PICC framing)
    • Up to 1.4 W output power with differential antenna
    • Possibility of driving two antennas in single ended mode
    • Inductive and capacitive Wake-up
    • Automatic antenna tuning system
    • DPO (Dynamic Power Output)
    • User selectable and automatic gain control
    • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
    • 6 Mbit/s SPI
    • Wide supply voltage range (from 2.4 V to 5.5 V)
    • QFN32, 5 mm x 5 mm package
  • STM32L476RET6 32-bit microcontroller with 512 kB of Flash memory
  • 105 mm x 52 mm, two turns antenna etched on the PCB, and associated VHBR tuning circuit
  • Micro-USB connector for communication with the host PC and board powering
  • Six LEDs indicating the presence of the RF field and of the protocol used to communicate

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
X-NUCLEO-NFC05A1

NFC card reader expansion board based on ST25R3911B for STM32 and STM8 Nucleos

主な特徴

  • On-board NFC card reader IC: ST25R3911B
  • 47 mm x 34 mm, four turns, 13.56 MHz inductive antenna etched on PCB and associated tuning circuit
  • Six general purpose LEDs
  • ISO 18092 (NFCIP-1) active P2P
  • ISO 14443A and ISO14443B
  • ISO 15693
  • FeliCa™
  • VHBR
    • 6.8 Mbit/s AFE and PCD to PICC framing
    • 3.4 Mbit/s PICC to PCD framing
  • Up to 1.4 W output power with differential antenna
  • Possibility of driving two antennas in single ended configuration
  • Inductive and capacitive wake-up
  • Automatic antenna tuning system
  • Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols
  • Equipped with Arduino™ UNO R3 connector
  • Free comprehensive development firmware library compatible with STM32Cube and samples for ST25R3911B
  • Scalable solution for multiple board cascade
  • FCC certified
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ISB042V1

Dual mode wireless power evaluation board for Qi and Airfuel inductive receiver and Qi-based transmitter with STWLC33

主な特徴

  • STWLC33 evaluation board with Würth Elektronik dual mode coil (760308102207)
  • Qi 1.2 compliant, supporting extended power profile: up to 15 W/10 V maximum output power
  • Backward compatible with Qi baseline power profile: up to 5 W/5 V maximum output power
  • PMA-SR1 (AirFuel inductive) compliant: 5 W/5.6 V maximum output power
  • Transmitter function based on Qi protocol to charge wearable devices using the same Rx coil (up to 3 W power)
  • Total system efficiency up to 80%
  • Configurable GPIOs for status indication
  • I²C interface for communication with the host system
  • Foreign object detection (FOD)
  • Complete kit (IC, firmware)
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-POE002V1

5V/8A, synchronous flyback converter, Power over Ethernet (PoE) IEEE 802.3bt compliant reference design

主な特徴

  • PM8805 4-pair IEEE 802.3bt compliant PD interface
  • Works with power supplied from Ethernet LAN cables or local auxiliary sources
  • Line input voltage range: 40 to 60 VDC
  • Output stage managed by configurable PM8804 controller
  • Output voltage: 5 VDC ±2.5%
  • Output current: 8 A
  • Peak-to-peak output ripple: <50 mV
  • DC-DC full load efficiency: >91%
  • Overall full load efficiency: >90%
  • Transient response ΔV pk-pk 100% to 50% load step ≈ 700 mV
  • Switching frequency ≈ 280 KHz

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
ST25R3911B-EMVCO

EMVCo reference design for the ST25R3911B high performance HF reader

主な特徴

  • Based on ST25R3911B high performance HF reader with 1.4 W output power
    • ISO14443A, ISO14443B (more protocols supported on ST25R3911B-DISCO kit)
    • Up to 1.4 W output power with differential antenna
    • DPO (Dynamic Power Output)
    • User selectable and automatic gain control
    • QFN32, 5 mm x 5 mm package
  • STM32L476 32-bit microcontroller with 1 Mbyte of Flash memory
  • 65 mm x 74 mm, two turn antenna etched on the PCB
  • Micro-USB connector for communication with the host PC and board supply
  • Integrated ST-LINK/V2 for programming and debugging of the STM32L476
  • 2.4 inch resistive touch TFT connected in 16 bit parallel mode
  • S-Touch controller
  • Comprehensive Device Test Environment (DTE) for control of the EMVCo Level 1 firmware

さらに表示

画像

Image
Image
STEVAL-ISB044V1

Qi MP-A10 15 W wireless charger TX evaluation kit based on STWBC-EP

主な特徴

  • STWBC-EP digital controller
  • 15 W output power
  • Qi MP-A10 reference design
  • WPC Qi1.2.3 standard compliant
  • Robust demodulation algorithm, with triple path (V, I, f)
  • Foreign object detection (FOD)
  • Accurate power control
  • Active presence detection
  • UART protocol to control and monitor the system
  • Complete reference design (evaluation board, IC, firmware and tools)
  • 2-layer PCB for easy design
  • Flash memory-based
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-POE003V1

5V/20A, active clamp forward converter, Power Over Ethernet (PoE) - IEEE 802.3bt compliant reference design

主な特徴

  • Features of PM8805 PoE-PD interface
    • System in package integrating a double active bridge, hot-swap MOSFET and PoE-PD interface
    • PoE-PD single-signature interface compliant with IEEE 802.3bt
    • Detection and support of high power 4-pair applications
    • 100 V N-Ch MOSFETs with 0.2 Ω total path resistance for each active bridge
    • Identifies which kind of PSE (standard or legacy) it is connected to and provides successful IEEE802.3.af/at/bt classification indication through a combination of the T0, T1 and T2 signals (open drain)
    • VFQFPN43 8x8 mm with 6 exposed pads
  • Features of PM8804 PWM controller
    • PWM peak current mode controller
    • Input operating voltage up to 75 V
    • Internal high voltage start up regulator with 20 mA capability
    • Programmable fixed frequency up to 1 MHz
    • Soft start up with settable time
    • Soft turn off (optionally disabled)
    • Dual 1Apk, low side complementary gate drivers
    • GATE2 optionally turned off for reduced consumption
    • 80% maximum duty cycle with internal slope compensation
    • VFQFPN 3.0x3.0x1.0 16L 0.5 mm pitch
  • WEEE compliant
  • RoHS compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
NUCLEO-F439ZI

STM32 Nucleo-144 development board with STM32F439ZI MCU, supports Arduino, ST Zio and morpho connectivity

主な特徴

  • Common features
    • STM32 microcontroller in LQFP144 package
    • 3 user LEDs
    • 2 user and reset push-buttons
    • 32.768 kHz crystal oscillator
    • Board connectors:SWDST Zio expansion connector including Arduino™ Uno V3ST morpho expansion connector
    • Flexible power-supply options: ST-LINK, USB VBUS or external sources
    • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
    • Comprehensive free software libraries and examples available with the STM32Cube MCU Package
    • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil® and GCC-based IDEs
  • Board-specific features
    • External or internal SMPS to generate Vcore logic supply
    • Ethernet compliant with IEEE-802.3-2002
    • USB OTG full speed or device only
    • Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
    • Arm® Mbed Enabled™ compliant

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
STEVAL-ISB045V1

2.5 W wireless charger transmitter evaluation kit

主な特徴

  • STWBC-WA digital controller
  • 2.5 W output power
  • Resistive and capacitive modulation
  • Foreign object detection (FOD)
  • Active presence detector
  • Turn-key and firmware APIs
  • Total reference design (IC, firmware, GUI and dongle)

さらに表示

画像

Image
Image

注目リソース

Schematics BOM Gerber
00 ファイルがダウンロード用に選択されています

技術文書

    • 概要 バージョン サイズ アクション
      AN4974
      Antenna matching for ST25R3911B/ST25R391x devices
      2.0
      3 MB
      PDF
      AN4914
      Automatic Antenna Tuning (AAT) of ST25R3911B/ST25R391x devices
      2.0
      1.9 MB
      PDF
      AN4900
      How to tune STEVAL-ISB038V1 wireless charging evaluation kit for wearable applications
      4.0
      1.1 MB
      PDF
      AN5043
      Layout recommendations for the design of boards with ST25R3911B/ST25R391x devices
      4.0
      873.78 KB
      PDF
      AN576
      PCB layout optimisation
      3.0
      109.53 KB
      PDF
      AN316
      Transil™ clamping protection mode
      4.3
      432.1 KB
      PDF
      AN4871
      USB Type-C protection and filtering
      2.1
      2.42 MB
      PDF
      AN4974

      Antenna matching for ST25R3911B/ST25R391x devices

      AN4914

      Automatic Antenna Tuning (AAT) of ST25R3911B/ST25R391x devices

      AN4900

      How to tune STEVAL-ISB038V1 wireless charging evaluation kit for wearable applications

      AN5043

      Layout recommendations for the design of boards with ST25R3911B/ST25R391x devices

      AN576

      PCB layout optimisation

      AN316

      Transil™ clamping protection mode

      AN4871

      USB Type-C protection and filtering

プレゼンテーション & トレーニング資料

    • 概要 バージョン サイズ アクション
      ST253911B-15 Product Presentation 1.0
      3.4 MB
      PDF

      ST253911B-15 Product Presentation

関連資料

    • 概要 バージョン サイズ アクション
      High performance NFC/RFID readers 1.0
      808.11 KB
      PDF
      Power Delivery Protection - Simply cancel ESD and EOS events 1.0
      794.98 KB
      PDF
      ST Protection Finder - The new app for Android and iOS 1.0
      1.52 MB
      PDF
      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers 2.3
      540.46 KB
      PDF
      STM32 GUI solutions - Advanced HMI now achievable on embedded systems 17.4
      867.7 KB
      PDF
      STM32L4 Series - Ultra-low-power and performance 17.3
      228.18 KB
      PDF
      STM32L4+ Series - Ultra-low-power and more performance 17.11
      224.53 KB
      PDF
      STM32L5 Series - Excellence in ultra-low-power with more security 18.10
      226.58 KB
      PDF
      Ultra-low clamping voltage 0201 ESD diodes 1.0
      826.44 KB
      PDF

      High performance NFC/RFID readers

      Power Delivery Protection - Simply cancel ESD and EOS events

      ST Protection Finder - The new app for Android and iOS

      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers

      STM32 GUI solutions - Advanced HMI now achievable on embedded systems

      STM32L4 Series - Ultra-low-power and performance

      STM32L4+ Series - Ultra-low-power and more performance

      STM32L5 Series - Excellence in ultra-low-power with more security

      Ultra-low clamping voltage 0201 ESD diodes

    • 概要 バージョン サイズ アクション
      Brochure Secure MCUs - Secure Solutions 1.0
      1.1 MB
      PDF
      モータ制御 リファレンス ガイド 15.11
      2.67 MB
      PDF
      NFC solutions from ST 1.0
      3.41 MB
      PDF
      Products and solutions for Secure Wearables 1.0
      998.04 KB
      PDF
      STM32L series - Ultra-low-power 32-bit MCUs 17.5
      1.66 MB
      PDF

      Brochure Secure MCUs - Secure Solutions

      モータ制御 リファレンス ガイド

      NFC solutions from ST

      Products and solutions for Secure Wearables

      STM32L series - Ultra-low-power 32-bit MCUs

開発ツール・ハードウェア

    • 製品型番

      STM32Cube initialization code generator

ソフトウェア製品

    • 製品型番

      Bluetooth Low Energy software expansion for STM32Cube

    • 製品型番

      Sources of STM32L4 based firmware for ST25R3911B-DISCO

      Antenna Matching Tool for ST25R NFC/HF reader family

EMI Filtering and Signal Conditioning

品名 概要
EMIF03-SIM02M8 3-line EMI filter and ESD protection for SIM card interfaces
EMIF08-LCD04M16 8-line L-C EMI filter and ESD protection for display interfaces
品名
3-line EMI filter and ESD protection for SIM card interfaces
8-line L-C EMI filter and ESD protection for display interfaces

Interfaces and Transceivers

品名 概要
ST8024L Smart card interface
品名
Smart card interface

NFC

品名 概要
ST25R3911B NFC / HF RFID Reader IC
ST25R3912 NFC / HF RFID Reader IC
ST25RU3993 RAIN RFID Reader IC for UHF with EPC Gen2 support
品名
NFC / HF RFID Reader IC
NFC / HF RFID Reader IC
RAIN RFID Reader IC for UHF with EPC Gen2 support

Protection Devices

品名 概要
ESDA7P120-1U1M High-power transient voltage supressor (TVS)
ESDZV5-1BF4 Ultra Low clamping single line bidirectional ESD protection
HSP053-4M5 4-line ESD protection for high-speed lines
USBLC6-2SC6Y Automotive very low capacitance ESD protection
品名
High-power transient voltage supressor (TVS)
Ultra Low clamping single line bidirectional ESD protection
4-line ESD protection for high-speed lines
Automotive very low capacitance ESD protection