EVAL-L9960T

Active

Evaluation board L9960T Dual H-bridge

Download databrief
Overview
Online design
Sample & Buy
Solutions
Documentation
CAD Resources
Tools & Software
Quality & Reliability
Partner products
Sales Briefcase

Product overview

Description

The EVAL-L9960 and EVAL-L9960T are the simplest solution to evaluate respectively the L9960 and L9960T functionalities providing all the inputs and outputs capabilities necessary to drive DC motors and monitor diagnostic functions. The driving strategy is enhanced by configurable PWM / DIR pins as IN1/IN2.The H-Bridge contains integrated free-wheel diodes. In case of freewheeling condition, the low side or the high side transistor is switched on in parallel of its diode to reduce power dissipation.
The integrated Serial Peripheral Interface (SPI) allows device parameters adjustment and to control all operating modes and read out diagnostic information.
Detailed failure diagnostics on each channel is provided via SPI: short circuit to battery, short circuit to ground, short circuit overload, over temperature. Open-load can be detected in ON condition, for the widest application ranges.
The EVAL-L9960 and EVAL-L9960T boards are suitable for both beginners and expert users working in standalone mode connected with any control system or combined with all SPC5 Discovery+ boards through a computer graphic interface or through embedded application examples
The board is compatible with both 5V and 3.3V control systems.
  • All features

    • Wide supply voltage range (VBatt): 4V÷28V
    • Current limitation threshold set by SPI:
    • 4 levels from 2.5A to 8.6A (Typ.)
    • Device controlled and programmed via SPI
    • Diagnostic functions accessible via SPI:
      • short circuit to battery,
      • short circuit to ground,
      • short circuit overload,
      • over temperature,
      • open load
    • On board 5V, 1.5A Voltage regulator
    • 2 LEDs for monitoring VBatt and EN signal.
    • Input signal connector compatible with the SPC5 Discovery+ boards.
    • Possibility to connect the board to microcontroller boards by a simple adaptor or by wires.
    • Test points to monitoring both input signals (SPI, PWM, EN) and outputs
    • Flexible driving strategy via configurable pins PWM/DIR (IN1/IN2):
      • No heat-sink is required

You might also like...

Recommended for you

All tools & software

    • Part number
      Status
      Description
      Type
      Supplier

      STSW-L9960T

      Active

      EVAL-L9960T Graphical User Interface

      Evaluation Tool Software ST
      STSW-L9960T

      Description:

      EVAL-L9960T Graphical User Interface

Quality and Reliability

Part Number Marketing Status RoHS Compliance Grade WEEE Compliant Material Declaration**
EVAL-L9960T
Active
Not compliant -

EVAL-L9960T

Package:

Not compliant

Material Declaration**:

Marketing Status

Active

RoHS Compliance Grade

Not compliant

WEEE Compliant

-

(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.

Sample & Buy

Part Number
Order from Distributors
Order from ST
Core Product
Marketing Status
Supplier
ECCN (US)
ECCN (EU)
Country of Origin
Budgetary Price (US$)*/Qty
EVAL-L9960T No availability of distributors reported, please contact our sales office L9960T
Active
ST EAR99 NEC ITALY 107.8 / 1

EVAL-L9960T

Core Product

L9960T

Marketing Status

Active

Budgetary Price (US$)*/Qty

107.8 / 1

Supplier

ST

ECCN (US)

EAR99

ECCN (EU)

NEC

Budgetary Price (US$)* / Qty

107.8 / 1

Country of Origin

ITALY

(*) Suggested Resale Price (USD) per defined quantity for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors