Product overview
Description
The TS2007 is a class D power audio amplifier. Able to drive up to 1.4 W into an 8 Ω load at 5 V, it achieves outstanding efficiency compared to typical class AB audio power amplifiers.
This device allows switching between two different gains: 6 or 12dB via a logic signal on the GS pin. A pop & click reduction circuitry provides low on/off switching noise while allowing the device to start within 5 ms. A standby function (active low) allows lowering the current consumption down to 10 nA typ.
The TS2007 is available in DFN8 3 x 3 mm lead-free packages.
-
All features
- Operating range from VCC = 2.4 V to 5.5 V
- Standby mode active low
- Output power: 1.4 W at 5 V or 0.45 W at 3.0 V into 8 Ω with 1% THD+N max.
- Output power: 2.3 W at 5 V or 0.75 W at 3.0 V into 4 Ω with 1% THD+N max.
- Fixed gain select: 6 dB or 12 dB
- Low current consumption
- Efficiency: 88% typ.
- Signal-to-noise ratio: 94 dB typ.
- PSRR: 63 dB typ at 217 Hz with 6 dB gain
- PWM base frequency: 280 kHz
- Low pop & click noise
- Thermal shutdown protection
- DFN8 3 x 3 mm package
EDA Symbols, Footprints and 3D Models
The STMicroelectronics team - TS2007
Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.
Please select one model supplier :
Symbols
Footprints
3D models