-
The ISO8200AQ is a galvanic isolated 8-channel driver featuring a very low supply current. It contains 2 independent galvanic isolated voltage domains (VCC and VDD for the Process and Control Logic stages, respectively). The IC is intended for driving any kind of load with one side connected to ground.
The Control Logic Stage features an 8-bit Output Status Register (where the μC sets the status ON/OFF of the output channels in the Process Stage) and an 8-bit Fault Register (where the OVT faults of each channel are stored). The two stages communicate through the galvanic isolation channel by an ST proprietary protocol.
Active channel current limitation (OVL) combined with thermal shutdown (OVT), independent for each channel, protects the device against overload and overtemperature.
Additional embedded functions are: loss of ground protection, VCC and VDD UVLOs (with hysteresis), watchdog and VCC Power GOOD.
An internal circuit provides an OR-wired not latched common (FAULT) indicator signaling the channel OVT. The (PGOOD) diagnostic pin is activated if VCC goes below the power good internal threshold. Both (FAULT) and (PGOOD) pins are open drain, active low, fault indication pins.Key Features
- Vdemag = VCC - 45 V (per channel)
- RDS(on) = 0.120 Ω (per channel)
- IOUT = 0.7 A (per channel)
- VCC = 45 V
- SPI interface with daisy chaining
- 5 V and 3.3 V TTL/CMOS & μC compatible I/Os
- Common output enable/disable pin
- Fast demagnetization of inductive loads
- Reset function for IC outputs disable
- Very low supply current
- Undervoltage shutdown with auto restart and hysteresis
- Short-circuit protection
- Per-channel overtemperature protection
- Thermal independence of separate channels
- Case overtemperature protection
- Loss of Ground and Supply protections
- Overvoltage protection (VCC clamping)
- Common OVT fault open drain output
- Power GOOD open drain output
- High common mode transient immunity
- ESD protection
- Designed to meet IEC 61000-4-2, IEC 61000-4-4, IEC 61000-4-5 and IEC 61000-4-8
- UL1577 certified
Sample & Buy
| Part Number | Package | Packing Type | Marketing Status | Budgetary Price (US$)* | Quantity | ECCN (US) | Country of Origin | Order from Distributors | Order from ST |
|---|---|---|---|---|---|---|---|---|---|
| ISO8200AQTR | TFQFPN 11.0X9.0X1.05 32L | Tape And Reel |
Active
|
3.125 | 1000 | EAR99 | - | Check Availability | Buy now |
| ISO8200AQ | TFQFPN 11.0X9.0X1.05 32L | Tray |
Active
|
3.125 | 1000 | EAR99 | - | No availability of distributors reported, please contact our sales office |
ISO8200AQ
Package
TFQFPN 11.0X9.0X1.05 32LPacking Type
TrayUnit Price (US$)
3.125*(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office  or our Distributors
Featured Videos
The first ST intelligent power switch with galvanic isolation on chip
Ecosystems
-
-
Picture Part number Manufacturer Description 
X-NUCLEO-OUT02A1 ST Industrial digital output expansion board based on ISO8200AQ for STM32 Nucleo Part NumberIndustrial digital output expansion board based on ISO8200AQ for STM32 Nucleo
-
Embedded Software
-
-
Picture Part number Manufacturer Description 
STSW-IFAPGUI -- Graphical user interface for the industrial IPS and IO-Link transceiver evaluation boards based on STM32 Nucleo Part NumberGraphical user interface for the industrial IPS and IO-Link transceiver evaluation boards based on STM32 Nucleo
-
-
-
Picture Part number Manufacturer Description 
X-CUBE-OUT2 ST Industrial digital output software expansion for STM32Cube Part NumberIndustrial digital output software expansion for STM32Cube
-
| Part Number | Marketing Status | Package | Grade | RoHS Compliance Grade | Material Declaration** |
|---|---|---|---|---|---|
| ISO8200AQ |
Active
|
TFQFPN 11.0X9.0X1.05 32L | Industrial | Ecopack2 |
|
| ISO8200AQTR |
Active
|
TFQFPN 11.0X9.0X1.05 32L | Industrial | Ecopack2 |
|
ISO8200AQ
Package:
TFQFPN 11.0X9.0X1.05 32LMaterial Declaration**:
ISO8200AQTR
Package:
TFQFPN 11.0X9.0X1.05 32LMaterial Declaration**:
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
