Overview
Solutions
HW Evaluation Tools
Resources
Tools and Software
Key Products
Get Started

Inside any building and home, fire alarm and smoke detectors systems are vital safety feature. They becoming more sophisticated, incorporating more sensors to detect not only smoke and fire but also monitoring the quality of the air.

These devices can alert individuals and authorities quicker, reducing the alert time and avoid property damage and casualties and they are dependent on very low power as high power means higher costs and more frequent maintenance both in a residential home and in a commercial building.

STMicroelectronics provides system level know-how and offers a complete set of semiconductor products to implement any smart alarm devices, thanks to complete range of precise sensors, ultra-low power solutions also for wireless connectivity, optimizing and drastically reducing energy consumption.

Part Number
Description
STEVAL-FET001V1 M41T62LC6F adapter board for a standard DIL 24 socket Quick view

Key Features

  • Complete M41T62LC6F pinout (I²C interface) for a standard DIL 24 socket
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISB035V1 Li-Ion/Li-Po battery power management evaluation board based on STBC03 Quick view

Key Features

  • Charges single-cell Li-Ion/Li-Po batteries with CC-CV algorithm and charge termination
  • Fast charge current programmable from 1 mA to 650 mA
  • Pre-charge current programmable from 1 mA to 650 mA
  • Adjustable floating voltage up to 4.45 V
  • Integrated always-ON low quiescent LDO regulator
  • Battery overcharge and over-discharge protections
  • Overcurrent protection
  • Shipping mode entry and exit inputs
  • Integrated dual 3 Ω SPDT load switches
  • Digital control inputs
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA055V1 0.7 A / 1.2 V synchronous buck converter with enable function based on the ST1S12XX Quick view

Key Features

  • RDS(on) typ. 250 m and 400 m
  • Not switching quiescent current: max 600 μA over temperature range
  • Uses tiny capacitors and inductors
  • Internal soft-start
  • Enable function
  • Step-down current mode PWM (1.7 MHz) DCDC converter
  • 0.7 A output current capability
  • Fixed output voltage of 1.2 V
  • Synchronous rectification
  • Typical efficiency: > 90%
  • 3% DC output voltage tolerance

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISB041V1 Li-Ion/Li-Po battery power management evaluation board based on STBC02 Quick view

Key Features

  • Charges single-cell Li-Ion/Li-Po batteries with CC-CV algorithm and charge termination
  • Fast charge current programmable from 1 mA to 450 mA
  • Pre-charge current programmable from 1 mA to 450 mA
  • Adjustable floating voltage up to 4.45 V
  • Integrated always-on low quiescent LDO regulator
  • Battery over-charge and over-discharge protections
  • Overcurrent protection
  • Shipping mode exit input
  • Integrated dual 3 Ω SPDT load switches
  • Integrated smart reset / watchdog logic
  • Single wire control interface
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-LDO001V1 Quad high performance LDO evaluation board based on LDBL20, LDLN025, LD39130S and STLQ020 Quick view

Key Features

  • Multi LDO evaluation board based on four high performance low dropout linear voltage regulators in miniature packages
  • Key features:
    • Low operating input voltage (from 1.4 V to 5.5 V)
    • Current capability from 200 mA to 300 mA
    • Low dropout (down to 160 mV typ.)
    • Ultra-low quiescent current (down to 500 nA typ.)
    • Low noise (down to 6.5 μVRMS typ.)
    • High PSSR (up to 80 dB)
    • Logic controlled electronic shutdown (enable)
    • Tiny packages (DFN-6L, Flip-chip, ST STAMP™)
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA141V1 2 A, 2 MHz, Vout = 3.3 V, high-efficiency dual-mode buck-boost DC-DC converter based on the STBB3J Quick view

Key Features

  • Input voltage range from 1.8 V to 5.5 V
  • 2 A output current at 3.3 V in buck mode (VIN = 3.6 V to 5.5 V)
  • 800 mA output current at 3.3 V in boost mode (VIN 2.0 V)
  • Typical efficiency higher than 94%
  • ±2% DC feedback voltage tolerance
  • Automatic transition between step-down and boost mode
  • Adjustable output voltage from 1.2 V to 5.5 V
  • Power save mode (PS) at light load
  • 2.0 MHz fixed switching frequency
  • Adjustable switching frequency up to 2.4 MHz (external synchronous square signal)
  • Device quiescent current less than 50 µA
  • Load disconnect during shutdown
  • Shutdown and soft-start functions
  • Shutdown current <1 A
  • Available in Flip-Chip 20, pitch = 0.4 mm
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25DV-DISCOVERY Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability Quick view

Key Features

  • Two ready-to-use printed circuit boards (PCB):
    • ST25DV_Discovery_Mboard:
    • STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM.
    • LCD color screen (320 x 200 pixels)
    • Touch screen driver
    • Different color LEDs (power, user, ST link)
    • User push button
    • Joystick for menu selection
    • Reset button
    • On board ST link for microcontroller firmware upgrade and debug
    • ST link mini USB
    • User micro USB
    • USB micro or mini connector for board powering
    • Demonstration use cases stored in memory
    • Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi® module and JTAG 20 pin connector
  • ST25DV_Discovery_ANT_C5:
    • 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB
    • ST25DV04K Dynamic NFC / RFID tag
    • I2 C interface connector
    • Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit
    • GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC04A1 Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo Quick view

Key Features

  • Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo
  • Up to 4-Kbit memory with NDEF support
  • 54 mm diameter, single layer circular antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino™ UNO R3 connector
  • Self-powered or powered through the Arduino™ UNO R3 connectors
  • Three general purpose LEDs
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware
  • FCC and IC verified
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC01A1 Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo Quick view

Key Features

  • M24SR64-Y Dynamic NFC/RFID tag IC
  • NFC antenna: 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Powered through the Arduino UNO R3 connectors
  • 3 color LEDs for general purpose

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
Part Number
STEVAL-FET001V1

M41T62LC6F adapter board for a standard DIL 24 socket

Key Features

  • Complete M41T62LC6F pinout (I²C interface) for a standard DIL 24 socket
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISB035V1

Li-Ion/Li-Po battery power management evaluation board based on STBC03

Key Features

  • Charges single-cell Li-Ion/Li-Po batteries with CC-CV algorithm and charge termination
  • Fast charge current programmable from 1 mA to 650 mA
  • Pre-charge current programmable from 1 mA to 650 mA
  • Adjustable floating voltage up to 4.45 V
  • Integrated always-ON low quiescent LDO regulator
  • Battery overcharge and over-discharge protections
  • Overcurrent protection
  • Shipping mode entry and exit inputs
  • Integrated dual 3 Ω SPDT load switches
  • Digital control inputs
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA055V1

0.7 A / 1.2 V synchronous buck converter with enable function based on the ST1S12XX

Key Features

  • RDS(on) typ. 250 m and 400 m
  • Not switching quiescent current: max 600 μA over temperature range
  • Uses tiny capacitors and inductors
  • Internal soft-start
  • Enable function
  • Step-down current mode PWM (1.7 MHz) DCDC converter
  • 0.7 A output current capability
  • Fixed output voltage of 1.2 V
  • Synchronous rectification
  • Typical efficiency: > 90%
  • 3% DC output voltage tolerance

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISB041V1

Li-Ion/Li-Po battery power management evaluation board based on STBC02

Key Features

  • Charges single-cell Li-Ion/Li-Po batteries with CC-CV algorithm and charge termination
  • Fast charge current programmable from 1 mA to 450 mA
  • Pre-charge current programmable from 1 mA to 450 mA
  • Adjustable floating voltage up to 4.45 V
  • Integrated always-on low quiescent LDO regulator
  • Battery over-charge and over-discharge protections
  • Overcurrent protection
  • Shipping mode exit input
  • Integrated dual 3 Ω SPDT load switches
  • Integrated smart reset / watchdog logic
  • Single wire control interface
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-LDO001V1

Quad high performance LDO evaluation board based on LDBL20, LDLN025, LD39130S and STLQ020

Key Features

  • Multi LDO evaluation board based on four high performance low dropout linear voltage regulators in miniature packages
  • Key features:
    • Low operating input voltage (from 1.4 V to 5.5 V)
    • Current capability from 200 mA to 300 mA
    • Low dropout (down to 160 mV typ.)
    • Ultra-low quiescent current (down to 500 nA typ.)
    • Low noise (down to 6.5 μVRMS typ.)
    • High PSSR (up to 80 dB)
    • Logic controlled electronic shutdown (enable)
    • Tiny packages (DFN-6L, Flip-chip, ST STAMP™)
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA141V1

2 A, 2 MHz, Vout = 3.3 V, high-efficiency dual-mode buck-boost DC-DC converter based on the STBB3J

Key Features

  • Input voltage range from 1.8 V to 5.5 V
  • 2 A output current at 3.3 V in buck mode (VIN = 3.6 V to 5.5 V)
  • 800 mA output current at 3.3 V in boost mode (VIN 2.0 V)
  • Typical efficiency higher than 94%
  • ±2% DC feedback voltage tolerance
  • Automatic transition between step-down and boost mode
  • Adjustable output voltage from 1.2 V to 5.5 V
  • Power save mode (PS) at light load
  • 2.0 MHz fixed switching frequency
  • Adjustable switching frequency up to 2.4 MHz (external synchronous square signal)
  • Device quiescent current less than 50 µA
  • Load disconnect during shutdown
  • Shutdown and soft-start functions
  • Shutdown current <1 A
  • Available in Flip-Chip 20, pitch = 0.4 mm
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25DV-DISCOVERY

Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability

Key Features

  • Two ready-to-use printed circuit boards (PCB):
    • ST25DV_Discovery_Mboard:
    • STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM.
    • LCD color screen (320 x 200 pixels)
    • Touch screen driver
    • Different color LEDs (power, user, ST link)
    • User push button
    • Joystick for menu selection
    • Reset button
    • On board ST link for microcontroller firmware upgrade and debug
    • ST link mini USB
    • User micro USB
    • USB micro or mini connector for board powering
    • Demonstration use cases stored in memory
    • Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi® module and JTAG 20 pin connector
  • ST25DV_Discovery_ANT_C5:
    • 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB
    • ST25DV04K Dynamic NFC / RFID tag
    • I2 C interface connector
    • Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit
    • GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC04A1

Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo

Key Features

  • Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo
  • Up to 4-Kbit memory with NDEF support
  • 54 mm diameter, single layer circular antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino™ UNO R3 connector
  • Self-powered or powered through the Arduino™ UNO R3 connectors
  • Three general purpose LEDs
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware
  • FCC and IC verified
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC01A1

Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo

Key Features

  • M24SR64-Y Dynamic NFC/RFID tag IC
  • NFC antenna: 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Powered through the Arduino UNO R3 connectors
  • 3 color LEDs for general purpose

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
00 Files selected for download

Technical Documentation

    • Description Version Size Action
      AN5085
      Cycling endurance and data retention of EEPROMs in ST25DVxxx products based on CMOS F8H process
      2.0
      306.83 KB
      PDF
      AN4653
      Cycling endurance and data retention of high density EEPROM based on CMOS F8H process
      1.0
      267.34 KB
      PDF
      AN4910
      Data exchange between wired (I²C) and wireless (RF ISO 15693) using fast transfer mode supported by ST25DVxxx
      1.0
      585.2 KB
      PDF
      AN4913
      Energy harvesting delivery impact on ST25DVxxx behavior during RF communication
      1.0
      1.05 MB
      PDF
      AN2866
      How to design a 13.56 MHz customized antenna for ST25 NFC / RFID Tags
      3.0
      615.85 KB
      PDF
      AN2972
      How to design an antenna for dynamic NFC tags
      9.0
      1.59 MB
      PDF
      AN934
      How to use the digital calibration feature in TIMEKEEPER® and serial real-time clock (RTC) products
      4.1
      123.42 KB
      PDF
      AN1216
      Implementing a periodic alarm with TIMEKEEPER® and serial real-time clocks (RTCs)
      2.0
      192.89 KB
      PDF
      AN923
      Managing century information using serial real-time clocks and TIMEKEEPER® NVRAMs
      4.0
      142.23 KB
      PDF
      AN4911
      NDEF management with ST25DVxxx and ST25TVxxx products
      4.0
      460.67 KB
      PDF
      AN576
      PCB layout optimisation
      3.0
      109.53 KB
      PDF
      AN5046
      Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages
      4.0
      4.82 MB
      PDF
      AN1019
      Second source for SNAPHAT® using a dual footprint
      2.1
      66.19 KB
      PDF
      AN4433
      Storing data into the NDEF memory of M24SR
      2.0
      507.23 KB
      PDF
      AN316
      Transil™ clamping protection mode
      4.3
      432.1 KB
      PDF
      AN5085

      Cycling endurance and data retention of EEPROMs in ST25DVxxx products based on CMOS F8H process

      AN4653

      Cycling endurance and data retention of high density EEPROM based on CMOS F8H process

      AN4910

      Data exchange between wired (I²C) and wireless (RF ISO 15693) using fast transfer mode supported by ST25DVxxx

      AN4913

      Energy harvesting delivery impact on ST25DVxxx behavior during RF communication

      AN2866

      How to design a 13.56 MHz customized antenna for ST25 NFC / RFID Tags

      AN2972

      How to design an antenna for dynamic NFC tags

      AN934

      How to use the digital calibration feature in TIMEKEEPER® and serial real-time clock (RTC) products

      AN1216

      Implementing a periodic alarm with TIMEKEEPER® and serial real-time clocks (RTCs)

      AN923

      Managing century information using serial real-time clocks and TIMEKEEPER® NVRAMs

      AN4911

      NDEF management with ST25DVxxx and ST25TVxxx products

      AN576

      PCB layout optimisation

      AN5046

      Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages

      AN1019

      Second source for SNAPHAT® using a dual footprint

      AN4433

      Storing data into the NDEF memory of M24SR

      AN316

      Transil™ clamping protection mode

Presentations & Training Material

    • Description Version Size Action
      EEPROM 2 Mbit highest density memories 1.0
      2.49 MB
      PDF
      ST25DV-I2C product presentation 2.2
      2.1 MB
      PDF

      EEPROM 2 Mbit highest density memories

      ST25DV-I2C product presentation

Publications and Collaterals

    • Description Version Size Action
      Battery management ICs - STBC02/03 Li-Ion charger with load switches and smart reset generator 04.2017
      730.72 KB
      PDF
      NFC / RFID tags M24SR series 2.0
      1.24 MB
      PDF
      NFC /RFID tags ST25TA series 2.0
      1.3 MB
      PDF
      Power Delivery Protection - Simply cancel ESD and EOS events 1.0
      1.2 MB
      PDF
      ST Protection Finder - The new app for Android and iOS 1.0
      1.52 MB
      PDF
      ST25DV-I2C series - Dynamic NFC/RFID tags 1.0
      1.47 MB
      PDF
      ST25TV series - Tags for Consumer Engagement flyer 1.1
      1.22 MB
      PDF
      Ultra-low clamping voltage 0201 ESD diodes 1.0
      1.32 MB
      PDF

      Battery management ICs - STBC02/03 Li-Ion charger with load switches and smart reset generator

      NFC / RFID tags M24SR series

      NFC /RFID tags ST25TA series

      Power Delivery Protection - Simply cancel ESD and EOS events

      ST Protection Finder - The new app for Android and iOS

      ST25DV-I2C series - Dynamic NFC/RFID tags

      ST25TV series - Tags for Consumer Engagement flyer

      Ultra-low clamping voltage 0201 ESD diodes

    • Description Version Size Action
      EEPROM selection guide 2.0
      843.56 KB
      PDF
      Linear and Switching Voltage Regulators Selection Guide 3.0
      370.88 KB
      PDF
      Protection devices and integrated EMI filtering selection guide 2.0
      743.69 KB
      PDF

      EEPROM selection guide

      Linear and Switching Voltage Regulators Selection Guide

      Protection devices and integrated EMI filtering selection guide

    • Description Version Size Action
      Brochure Power management guide 10.2018
      4.42 MB
      PDF
      NFC solutions from ST 1.0
      3.53 MB
      PDF
      Power management for handheld and portable 2.0
      1.09 MB
      PDF

      Brochure Power management guide

      NFC solutions from ST

      Power management for handheld and portable

Design Tools

    • Part Number

      Transient voltage suppressor smart selection tool

Development Tools

    • Part Number

      Protection product finder application for Android and iOS

Embedded Software

    • Part Number

      STM32Cube expansion software for X-NUCLEO-NFC01A1

      Dynamic NFC/RFID tag IC software expansion for STM32Cube

    • Part Number

      Application executable of the "NFC Tap" Android app for ST25 product family

      Firmware for ST25DV-DISCOVERY kit

      Application executable of the "NFC Tap" iOS app for ST25 product family

      Windows® PC software for ISO15693, ISO14443-A/B, NFC and industrial readers

      Software Development Kit for ST25 Tags and Dynamic Tags

eDesignSuite

Converter

Input

V This option is required. And must be less than or equal to Volt. Max [V]
V This option is required. And must be greater than or equal to Volt. Min [V]

Output Power

V This option is required and must be a number.
A This option is required and must be a number.

Audio ICs

Part number Description
MP34DT05-A MEMS audio sensor omnidirectional digital microphone, 64 dB SNR, -26 dBFS sensitivity, top-port, 122.5 dBSPL AOP
Part number
MEMS audio sensor omnidirectional digital microphone, 64 dB SNR, -26 dBFS sensitivity, top-port, 122.5 dBSPL AOP

Clocks and Timers

Part number Description
M41T0 Serial real-time clock (RTC)
M41T80 Serial real-time clock (RTC) with alarm
Part number
Serial real-time clock (RTC)
Serial real-time clock (RTC) with alarm

EMI Filtering and Signal Conditioning

Part number Description
BALF-NRG-02D3 50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
BALF-SPI-01D3 50Ω nominal input / conjugate match balun to SPIRIT1, with integrated harmonic filter
BALF-SPI2-01D3 50 Ω nominal input / conjugate match balun to S2-LP,868 - 930 MHz with integrated harmonic filter
Part number
50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
50Ω nominal input / conjugate match balun to SPIRIT1, with integrated harmonic filter
50 Ω nominal input / conjugate match balun to S2-LP,868 - 930 MHz with integrated harmonic filter

Imaging and Photonics Solutions

Part number Description
VL53L0X World smallest Time-of-Flight (ToF) ranging sensor
VL53L1X Long distance ranging Time-of-Flight sensor based on ST FlightSense technology
Part number
World smallest Time-of-Flight (ToF) ranging sensor
Long distance ranging Time-of-Flight sensor based on ST FlightSense technology

MEMS and Sensors

Part number Description
HTS221 Capacitive digital sensor for relative humidity and temperature
STTS751 2.25 V low-voltage local digital temperature sensor
Part number
Capacitive digital sensor for relative humidity and temperature
2.25 V low-voltage local digital temperature sensor

Power Management

Part number Description
LD39020 200 mA very low quiescent current Linear regulator IC
LD39130S 300 mA very low quiescent current Linear regulator IC with automatic Green mode
LDK120 200 mA low quiescent current very low noise LDO
LDK130 300 mA low quiescent current very low noise LDO
ST1S12XX Synchronous rectification with inhibit, 0.7 A, 1.7 MHz adjustable, step-down switching regulator
STBC02 Li-Ion linear battery charger with LDO, load switches and reset generator
STBC03 Li-Ion linear battery charger with LDO and load switches
STLQ020 200 mA ultra-low quiescent current LDO
STNS01 Li-Ion Linear Battery Charger with LDO
Part number
200 mA very low quiescent current Linear regulator IC
300 mA very low quiescent current Linear regulator IC with automatic Green mode
200 mA low quiescent current very low noise LDO
300 mA low quiescent current very low noise LDO
Synchronous rectification with inhibit, 0.7 A, 1.7 MHz adjustable, step-down switching regulator
Li-Ion linear battery charger with LDO, load switches and reset generator
Li-Ion linear battery charger with LDO and load switches
200 mA ultra-low quiescent current LDO
Li-Ion Linear Battery Charger with LDO

Power Transistors

Part number Description
STL11N3LLH6 N-channel 30 V, 6 mOhm typ., 11 A STripFET H6 Power MOSFET in a PowerFLAT(TM) 3.3 x 3.3 package
STL20N6F7 N-channel 60 V, 0.0046 Ohm typ., 20 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package
STL36DN6F7 Dual N-channel 60 V, 0.023 Ohm typ., 36 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 double island package
Part number
N-channel 30 V, 6 mOhm typ., 11 A STripFET H6 Power MOSFET in a PowerFLAT(TM) 3.3 x 3.3 package
N-channel 60 V, 0.0046 Ohm typ., 20 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package
Dual N-channel 60 V, 0.023 Ohm typ., 36 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 double island package

Protection Devices

Part number Description
ESDA25P35-1U1M High-power transient voltage suppressor (TVS)
ESDA7P120-1U1M High-power transient voltage supressor (TVS)
SMAJ 400 W TVS in SMA
Part number
High-power transient voltage suppressor (TVS)
High-power transient voltage supressor (TVS)
400 W TVS in SMA

Wireless Transceivers, MCUs and Modules

Part number Description
S2-LP Ultra-low power, high performance, sub-1GHz transceiver
SPIRIT1 Low data rate, low power Sub 1GHz transceiver
SPSGRF Sub-GHz (868 or 915 MHz) low power programmable RF transceiver modules
STS1TX Low data rate, low power sub-1GHz transmitter
Part number
Ultra-low power, high performance, sub-1GHz transceiver
Low data rate, low power Sub 1GHz transceiver
Sub-GHz (868 or 915 MHz) low power programmable RF transceiver modules
Low data rate, low power sub-1GHz transmitter