Product overview
Description
The L99MH94 and L99MH92 integrate respectively a quad and a dual half-bridge pre-driver dedicated to control up to eight and four N-channel MOSFETs.
It is intended for DC motor control applications such as automotive power seat control or other applications.
A 24-bit serial peripheral interface (SPI) is used for configuring and controlling the eight half-bridges or four H‑bridge. SPI status registers provide high-level diagnostic information such as supply voltage monitoring, the charge pump voltage monitoring, temperature warning and overtemperature shutdown.
Each gate driver monitors independently its external MOSFET drain-source voltage for fault conditions.
The L99MH94 / L99MH92 support indirect current measurement on external MOSFETs, allowing cost saving and lower system complexity, avoiding the usage of shunt resistors.
A more efficient gate current control of the external MOSFETs, called “three stages gate current”, decreases and optimizes electromagnetic interference (EMI).
Protection features (drain-source monitoring for short circuit detection, overtemperature warning and shutdown, timeout watchdog for MCU control, detailed off-state diagnostic via SPI) ensure the ASIL-B achievement according to ISO 26262 standard.
The L99MH94 is housed in VFQFN48L and VFQFN32L packages with an exposed pad, the L99MH92 is housed in a VFQFN32L package with exposed pad. These packages have wettable flanks for easy visual inspection of the solder joint.
-
All features
- AEC-Q100 qualified
- ISO26262 compliant, covering ASIL-B safety integrity level
- Quad (L99MH94) and dual (L99MH92) half-bridge, or dual (L99MH94) and single (L99MH92) H-Bridge, pre-driver
- Independent channel driver up to 4 (L99MH94) and 2 (L99MH92) high-side or 4 (L99MH94) and 2 (L99MH92) low-side
- Driving logic permits any H-bridge configuration, pairing different half-bridges, using the internal gate drivers (GHx/SHx/GLx can be associated to any GHy/SHy/GLy)
- Support logic level and standard level MOSFETs
- Control of reverse battery protection MOSFET
- Fully configurable half-bridge driver in case of fault occurrence
- Generator mode for power trunk/tailgate applications
- Supporting indirect current measurement of external MOSFETs
- SPI configurable overvoltage threshold
- Adaptive MOSFET gate control
- Three steps gate control of external HS/LS
- Improved electromagnetic emission
- Programmable gate current up to 120 mA
- Reduced switching losses in PWM mode
- Vds monitoring
- Low IQ (1.05 μA) in reset mode
- High-side and low-side capable of protection and diagnosis
- Two external diodes control, needed for assisting calibration of indirect current measurement, can be used for steady - temperature monitoring
- Drain-source monitoring for short circuit detection
- Overtemperature warning and shutdown
- Timeout watchdog for MCU control
- Detailed off-state diagnostic (open load, short circuit to battery or short circuit to GND) via SPI
- Three PWM inputs
- High-side and low-side PWM capable
- Active freewheeling
- Up to 50 kHz PWM frequency
- Out-of-frame serial peripheral interface (SPI), 24 bits
- QFN package with wettable flanks
- Green product (RoHS compliant)
EDA Symbols, Footprints and 3D Models
STMicroelectronics - L99MH94
Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.
Please select one model supplier :
Symbols
Footprints
3D models
Quality and Reliability
| Part Number | Marketing Status | Package | Grade | RoHS Compliance Grade | Longevity Commitment | Longevity Starting Date | Material Declaration** |
|---|---|---|---|---|---|---|---|
| L99MH94Q5-TR | Active | VFQFN 5X5X0.9 32+4L WETT. FLANKS | Automotive Safety | Ecopack2 | - | - | |
| L99MH94Q7-TR | Active | VFQFN 7X7X0.9 48L WETT. FLANKS | Automotive Safety | Ecopack2 | - | - | |
L99MH94Q5-TR
Package:
VFQFN 5X5X0.9 32+4L WETT. FLANKSMaterial Declaration**:
L99MH94Q7-TR
Package:
VFQFN 7X7X0.9 48L WETT. FLANKSMaterial Declaration**:
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
Sample & Buy
| Part Number | Marketing Status | Budgetary Price (US$)*/Qty | Order from ST | Order from distributors | Package | Packing Type | RoHS | Country of Origin | ECCN (US) | ECCN (EU) | Operating Temperature (°C) (min) | Operating Temperature (°C) (max) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| L99MH94Q7-TR | | | distributors No availability of distributors reported, please contact our sales office | ||||||||||
| L99MH94Q5-TR | | | distributors No availability of distributors reported, please contact our sales office |
L99MH94Q7-TR Active
L99MH94Q5-TR Active
(*) Suggested Resale Price (USD) per defined quantity for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors