The ST25R HF RFID / NFC reader series provides multiprotocol support for 13.56 MHz NFC / RFID communications such as ISO 14443 Type A or B, ISO 15693, ISO 18092, FeliCa and NFC Forum protocols. Our NFC reader ICs and chips integrate an SPI interface to communicate with a host microcontroller.
The ST25RU Rain / UHF RFID reader IC provides energy efficient hardware support for communication protocols such as ISO 18000-62/63, EPC Gen2 v 2.1, ISO 29143. Other UHF RFID protocols may be implemented in the IC's transparent mode. The Reader IC allows a tag read speed of up to 500 [tags/sec] for high tag update rates. Large tag populations can be inventoried with a competitive tag detection rate provides by the IC's high receive sensitivity and the efficient tag anti-collision algorithm implemented in the open reader firmware.
As a main provider of Near-Field Communication technology, ST's complete NFC reader portfolio will help you design and develop the most effective and secure contactless solutions for all embedded, payment and automotive applications.
New
ST25R3916: High-performance NFC Universal Device & EMVCo Reader
Thanks to its outstanding performances and unique features, our new NFC universal device ST25R3916 is ideal for payment applications and a perfect fit for a large diversity of consumer and industrial applications, including access control, gaming, IoT, pairing, brand protection, product configuration, authentication and traceability, just to name a few.
Key features include:
- 1.6W output power at 5V
- Active Wave Shaping
- Automatic Antenna Tuning (AAT)
- Noise Suppression Receiver
- Dynamic Power Output (DPO)
- Capacitive & Inductive Wake-Up (CIWU) for power saving
- Full compliance to all relevant NFC standards
ST25R39xx Series: High performance RFID NFC readers
The ST25R39xx series includes high performance NFC / HF RFID Reader ICs with unique features, such as Automatic Antenna Tuning (AAT), Dynamic Power Output (DPO), Inductive & Capacitive wake-up and active wave shaping. Operating modes supported are Reader Writer and P2P (peer-to-peer) modes.
Compatible with:
- ISO/IEC 14443 Type A
- ISO/IEC 14443 Type B
- ISO/IEC 15693
- ISO/IEC 18092 (NFCIP-1) initiator and target in active mode only
- FeliCa
- NFC Forum
Key application examples:
- Payment and Point of Sales (POS)
- Automotive
- Access control
- Gaming
- Qi charge protection & authentication
- Metering
- eGovernment
ST25R39xx NFC readers for Payment and Point of Sales (POS) terminals
Boasting EMVCo & PBOC certifications, the ST25R3911B, ST25R3912, ST25R3913, ST25R3916 reader ICs provide a complete solution for mobile (mPOS) and traditional contactless POS payment terminals.
Unique features ensure designers fast time to market and compliance with relevant NFC specifications, faster EMVCo certification and reduced BOM.
ST25R39xx NFC readers for Automotive Applications
ST25R3914 and ST25R3915 are highly integrated NFC initiators / HF reader ICs for automotive applications (full AEC-Q100 grade 1 certified). Featuring ultra-low power wake-up modes and reliable performance even in metallic environment, our automotive-grade HF RFID/NFC reader ICs and chips are ideal for car access, start and driver authentication, pairing, data transfer, in-car payment or NFC enhanced protection for Qi wireless charging.
ST25R95: NFC / RFID integrated reader and transceiver IC for contactless applications
The ST25R95 provides multiprotocol support for 13.56 MHz NFC/RFID communications. Operating modes supported are Reader/Writer and Card Emulation modes, thus covering a wide spectrum of applications. It also supports the detection, reading and writing of NFC Forum Type 1, 2, 3, 4 and 5 tags.
Compatible with:
- ISO/IEC 14443 Type A
- ISO/IEC 14443 Type B
- ISO/IEC 15693
- ISO/IEC 18092
- FeliCa
- MIFARE® Classic compatible
Key application / use case examples:
- Product authentication and configuration
- Access control
- Door locks
- Industrial, medical, commercial tag readers
- Dynamic data exchanges between 2 NFC devices
ST25RU Series: RAIN UHF RFID reader ICs
The ST25RU3993 is a UHF RFID RAIN reader IC providing multiprotocol support for the 840-960 MHz UHF band and follows EPC Class1 Gen2. Optimal performances combined with lowest power consumption makes it ideal for battery operated handheld devices, such as mobile phones, but also for a large diversity of consumer, industrial and medical applications.
Compatible with:
- ISO/IEC 18000-6C (EPC Class1 Gen2)
- ISO/IEC 18000-6A/B through direct mode
- ISO/IEC 29143 (Air interface for mobile RFID)
Key application examples:
- Retail/Stationary Readers
- Industrial PDA's
- Mobile phones / Handheld
- Consumer, Industrial and Medical Applications
- Portable Data Capture
- Gaming
- Supply chain and logistics
- Asset tracking
- Cold chain management
- IoT-based applications
Key features of ST25R NFC/RFID reader series
Standard compliant
- ISO/IEC 14443A/B
- ISO/IEC 15693
- ISO/IEC 18092
- FeliCa
- NFC Forum
- EMVCo & PBOC
- ISO/IEC 18000
- ISO/IEC 29143
- Rain Alliance
Feature-rich
- 13.56MHz HF interface
- 840-960MHz UHF
- Very High Bit Rate
- Peer-to-Peer
- Automatic Antenna Tuning (AAT)
- Operating temperature -40°C to 125°C
Best-In-Class Reader IP
- High Output power (up to 1.4W)
- High Receiver sensitivity
- Capacitive / Inductive Wake Up
- Low power operation & Standby
- Dense Reader Mode (DRM)
Ecosystem
- Documentation (application notes, datasheets, product presentation, videos...)
- Evaluation boards
- Antenna Design Tool
- Associated NFC/RFID software
- ST25 Community
Featured Videos
Recommended for you
-
CR95HF
NFC Reader IC
-
ST25RU3993
RAIN RFID Reader IC for UHF with EPC Gen2 support
-
ST25R3912
NFC / HF RFID Reader IC
-
ST25R3913
NFC / HF RFID Reader IC
-
ST25R95
NFC/HF RFID Reader IC
-
ST25R3911B
NFC / HF RFID Reader IC
-
ST25RU3992
UHF RFID Reader IC
-
ST95HF
NFC Transceiver IC
-
ST25R3914
NFC / HF RFID Reader IC for Automotive
-
ST25R3916
High performance NFC universal device and EMVCo reader
-
ST25R3915
NFC / HF RFID Reader IC for Automotive
