Digital Cameras

Search History

Bookmark

Please log in to show your saved searches.

Overview

Solutions

HW Evaluation Tools

Resources

Tools and Software

Key Products

Get Started

Quick links

Digital cameras come in a wide variety of types with very different characteristics and features. With competition from smartphones in the casual photography market, digital cameras aim to bring better photography experiences while providing consumers with the interactivity and convenience they have come to expect from personal electronics devices. This means the inclusion of features like wireless connectivity, smartphone-like interfaces and touchscreens, optical/electronic image stabilization (OIS/EIS), autofocus etc.

ST provides range of products that can enhance digital camera design. Key products include Bluetooth and NFC connectivity solutions, LCD and OLED display control & power management, motion sensors including OIS and EIS support, microphones and proximity & ranging sensors. We also offer low power microcontrollers and power management & battery management devices to provide optimize battery life.

Inclinometer

Autofocus ASSIST - Ranging Sensor

P/L detection

LCD/OLED Display PSU

Proximity and Ranging sensors

Analog Microphones

Headphone and Low Power Amplifiers

USB controllers

Balun

Dynamic NFC tag

Bluetooth Low Energy

Serial EEPROM

RTC-Serial Interface

Integrated PMUs

Battery chargers

Smart Reset Ics

Part Number	Description
X-NUCLEO-NFC04A1	Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo	Quick view Key Features Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo Up to 4-Kbit memory with NDEF support 54 mm diameter, single layer circular antenna Compatible with STM32 Nucleo boards Equipped with Arduino™ UNO R3 connector Self-powered or powered through the Arduino™ UNO R3 connectors Three general purpose LEDs Scalable solution, capable of cascading multiple boards for larger systems Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware FCC and IC verified RoHS compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
ST25DV-DISCOVERY	Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability	Quick view Key Features Two ready-to-use printed circuit boards (PCB): ST25DV_Discovery_Mboard: STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM. LCD color screen (320 x 200 pixels) Touch screen driver Different color LEDs (power, user, ST link) User push button Joystick for menu selection Reset button On board ST link for microcontroller firmware upgrade and debug ST link mini USB User micro USB USB micro or mini connector for board powering Demonstration use cases stored in memory Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi^® module and JTAG 20 pin connector ST25DV_Discovery_ANT_C5: 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB ST25DV04K Dynamic NFC / RFID tag I² C interface connector Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-LDO001V1	Quad high performance LDO evaluation board based on LDBL20, LDLN025, LD39130S and STLQ020	Quick view Key Features Multi LDO evaluation board based on four high performance low dropout linear voltage regulators in miniature packages Key features: Low operating input voltage (from 1.4 V to 5.5 V) Current capability from 200 mA to 300 mA Low dropout (down to 160 mV typ.) Ultra-low quiescent current (down to 500 nA typ.) Low noise (down to 6.5 μVRMS typ.) High PSSR (up to 80 dB) Logic controlled electronic shutdown (enable) Tiny packages (DFN-6L, Flip-chip, ST STAMP™) RoHS compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-BCNKT01V1	BlueCoin Starter kit	Quick view Key Features Contains FCC ID: S9NBCOIN01 Contains module IC 8976C-BCOIN01 certified with PMN: STEVAL-BCNKT01V1; HVIN: STEVAL-BCNCS01V1; HMN: STEVAL-BCNCR01V1; FVIN: bluenrg_7_2_c_Mode_2-32MHz-XO32K_4M.img The development kit package includes: BlueCoin module (STEVAL-BCNCS01V1) with STM32F446, LSM6DSM, LSM303AGR, LPS22HB, 4x MP34DT06J, BlueNRG-MS, BALF-NRG-01D3, STBC03JR CoinStation (STEVAL-BCNST01V1) board BlueCoin Cradle (STEVAL-BCNCR01V1) 130 mAh Li-Po battery Plastic box for housing the BlueCoin cradle and the battery SWD programming cable Software libraries and tools: STSW-BCNKT01 firmware package with raw sensor data streaming support via USB, data logging on SDCard, audio acquisition and audio streaming, time-of-flight example and BLE protocol to interface to a Smartphone App FP-AUD-SMARTMIC1: smart audio IN-OUT software expansion for STM32Cube FP-SNS-ALLMEMS1: STM32 ODE function pack for BLE and sensors FP-AUD-BVLINK1: BLE and microphones software expansion for STM32Cube STBLESensor: iOS™ and Android™ demo apps BlueST-SDK: iOS and Android software development kit Compatible with STM32 ecosystem through STM32Cube support Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-IDB007V1M	Evaluation platform based on the SPBTLE-1S module	Quick view Key Features Bluetooth^® SMART board with the SPBTLE-1S certified module based on the BlueNRG-1 Bluetooth low energy system-on-chip Associated BlueNRG-1 development kit SW package including firmware and documentation Up to +5 dBm available output power Bluetooth^® low energy v4.2 compliant, supports master, slave and simultaneous master-and-slave roles Integrated balun which integrates a matching network and harmonics filter SMA connector for antenna or measuring equipment 3 user LEDs 2 user buttons 3D digital accelerometer and 3D digital gyroscope MEMS pressure sensor with embedded temperature sensor Battery holder JTAG debug connector USB to serial bridge for providing I/O channel with the BlueNRG-1 device Jumper for measuring current for BlueNRG-1 only RoHS compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-BLUEMIC-1	Ultra-low power Bluetooth® low energy microphone based on SPBTLE-1S certified module	Quick view Key Features Bluetooth^® SMART small form factor board based on the SPBTLE-1S module, Bluetooth v4.2 compliant On-board SPBTLE-1S module, based on BlueNRG-1, Bluetooth low energy application processor system on chip embedding: an ultra-low power ARM^® Cortex^® -M0 32-bit core architecture programmable embedded 160 KB Flash 24 KB embedded RAM with data retention On-board MP34DT05-A (or MP34DT04-C1 in the first generation board) digital MEMS microphone On-board LSM6DSL: MEMS 3D accelerometer (±2 / ±4 / ±8 / ±16 g) plus 3D gyroscope (±125 / ±245 / ±500 / ±1000 / ±2000 dps) Voltage supply: 1V8 or 3V3 Battery or USB powered 100 mAh Li-Ion battery On-board STBC08 linear Li-Ion battery charger SWD connector Included in the development kit package: STEVAL-BLUEMIC-1 Plastic box for housing STEVAL-BLUEMIC-1 100 mAh Li-Ion battery SWD programming cable SW development kit for audio and inertial MEMS data streaming over BLE ST BlueMS: Android and iOS demo App available in the respective stores CE certified RoHS and China RoHS compliant Contains Transmitter Module FCC (ID: S9NSPBTLE1S) certified Contains Transmitter Module IC (IC: 8976C-SPBTLE1S) certified Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-IDB008V2	Evaluation platform based on the BlueNRG-2	Quick view Key Features Bluetooth^® SMART board based on the BlueNRG-2 Bluetooth low energy system on chip Associated BlueNRG-2 development kit SW package including firmware and documentation Up to +8 dBm available output power (at antenna connector) Excellent receiver sensitivity (-88 dBm) Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm Bluetooth^® SMART v5.0 compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter SMA connector for antenna or measuring equipment 3 user LEDs 2 user buttons 3D digital accelerometer and 3D digital gyroscope MEMS pressure sensor with embedded temperature sensor RoHS compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
M24SR-DISCOVERY	Discovery kit for the M24SR series - Dynamic NFC/RFID tag	Quick view Key Features Ready-to-use printed circuit board (PCB) including: M24SR64-Y Dynamic NFC/RFID tag 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14) STM32F103RGT6 64LQFP 32-bit microcontroller, with 1Mbytes of Flash memory LCD Color Screen (320*200 pixels) Different color LEDs USB microB connector for board powering JTAG connector for microcontroller firmware upgrade and debug Joystick for menu selection M24SR-DISCO-PREM specific features: Bluetooth module with audio outputs connected to Jack 3.5 Headset Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
X-NUCLEO-NFC01A1	Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo	Quick view Key Features M24SR64-Y Dynamic NFC/RFID tag IC NFC antenna: 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14) Compatible with STM32 Nucleo boards Equipped with Arduino UNO R3 connector Powered through the Arduino UNO R3 connectors 3 color LEDs for general purpose Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
X-NUCLEO-IDB05A1	Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo	Quick view Key Features STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF) SPBTLE-RF: Bluetooth Low Energy FCC and IC certified module based on Bluetooth^® SMART 4.1 network processor BlueNRG-MS Integrated Balun (BALF-NRG-01D3) Chip antenna Compatible with STM32 Nucleo boards Equipped with Arduino UNO R3 connector Scalable solution, capable of cascading multiple boards for larger systems Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware RoHS compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-STLKT01V1	SensorTile development kit	Quick view Key Features Included in the development kit package: SensorTile module (STEVAL-STLCS01V1) with STM32L476JG, LSM6DSM, LSM303AGR, LPS22HB, MP34DT05-A, BlueNRG-MS, BALF-NRG-02D3 and LD39115J18R SensorTile expansion Cradle board equipped with audio DAC, USB port, STM32 Nucleo, Arduino UNO R3 and SWD connector SensorTile Cradle with battery charger, humidity and temperature sensor, SD memory card slot, USB port and breakaway SWD connector 100 mAh Li-Ion battery Plastic box SWD programming cable Software libraries and tools STSW-STLKT01: SensorTile firmware package that supports sensors raw data streaming via USB, data logging on SDCard, audio acquisition and audio streaming. FP-SNS-ALLMEMS1 and FP-SNS-MOTENV1: STM32Cube function packs STBLESensor: iOS and Android demo Apps BlueST-SDK: iOS and Android Software Development Kit CE certified RoHS and China RoHS compliant WEEE compliant FCC (ID: S9NSTILE01) certified IC (IC: 8976C-STILE01) certified with PMN: STEVAL-STLKT01V1; HVIN: STEVAL-STLCS01V1; HMN: STEVAL-STLCX01V1; FVIN: bluenrg_7_1_e_Mode_2-32MHz-XO32K_4M.img TYPE certified (006-000482) Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber

Part Number

X-NUCLEO-NFC04A1

Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo

Quick view

Key Features

Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo
Up to 4-Kbit memory with NDEF support
54 mm diameter, single layer circular antenna
Compatible with STM32 Nucleo boards
Equipped with Arduino™ UNO R3 connector
Self-powered or powered through the Arduino™ UNO R3 connectors
Three general purpose LEDs
Scalable solution, capable of cascading multiple boards for larger systems
Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware
FCC and IC verified
RoHS compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

ST25DV-DISCOVERY

Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability

Quick view

Key Features

Two ready-to-use printed circuit boards (PCB):
- ST25DV_Discovery_Mboard:
- STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM.
- LCD color screen (320 x 200 pixels)
- Touch screen driver
- Different color LEDs (power, user, ST link)
- User push button
- Joystick for menu selection
- Reset button
- On board ST link for microcontroller firmware upgrade and debug
- ST link mini USB
- User micro USB
- USB micro or mini connector for board powering
- Demonstration use cases stored in memory
- Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi^® module and JTAG 20 pin connector
ST25DV_Discovery_ANT_C5:
- 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB
- ST25DV04K Dynamic NFC / RFID tag
- I² C interface connector
- Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit
- GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-LDO001V1

Quad high performance LDO evaluation board based on LDBL20, LDLN025, LD39130S and STLQ020

Quick view

Key Features

Multi LDO evaluation board based on four high performance low dropout linear voltage regulators in miniature packages
Key features:
- Low operating input voltage (from 1.4 V to 5.5 V)
- Current capability from 200 mA to 300 mA
- Low dropout (down to 160 mV typ.)
- Ultra-low quiescent current (down to 500 nA typ.)
- Low noise (down to 6.5 μVRMS typ.)
- High PSSR (up to 80 dB)
- Logic controlled electronic shutdown (enable)
- Tiny packages (DFN-6L, Flip-chip, ST STAMP™)
RoHS compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-BCNKT01V1

BlueCoin Starter kit

Quick view

Key Features

Contains FCC ID: S9NBCOIN01
Contains module IC 8976C-BCOIN01 certified with PMN: STEVAL-BCNKT01V1; HVIN: STEVAL-BCNCS01V1; HMN: STEVAL-BCNCR01V1; FVIN: bluenrg_7_2_c_Mode_2-32MHz-XO32K_4M.img
The development kit package includes:
- BlueCoin module (STEVAL-BCNCS01V1) with STM32F446, LSM6DSM, LSM303AGR, LPS22HB, 4x MP34DT06J, BlueNRG-MS, BALF-NRG-01D3, STBC03JR
- CoinStation (STEVAL-BCNST01V1) board
- BlueCoin Cradle (STEVAL-BCNCR01V1)
- 130 mAh Li-Po battery
- Plastic box for housing the BlueCoin cradle and the battery
- SWD programming cable
Software libraries and tools:
- STSW-BCNKT01 firmware package with raw sensor data streaming support via USB, data logging on SDCard, audio acquisition and audio streaming, time-of-flight example and BLE protocol to interface to a Smartphone App
- FP-AUD-SMARTMIC1: smart audio IN-OUT software expansion for STM32Cube
- FP-SNS-ALLMEMS1: STM32 ODE function pack for BLE and sensors
- FP-AUD-BVLINK1: BLE and microphones software expansion for STM32Cube
- STBLESensor: iOS™ and Android™ demo apps
- BlueST-SDK: iOS and Android software development kit
- Compatible with STM32 ecosystem through STM32Cube support

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-IDB007V1M

Evaluation platform based on the SPBTLE-1S module

Quick view

Key Features

Bluetooth^® SMART board with the SPBTLE-1S certified module based on the BlueNRG-1 Bluetooth low energy system-on-chip
Associated BlueNRG-1 development kit SW package including firmware and documentation
Up to +5 dBm available output power
Bluetooth^® low energy v4.2 compliant, supports master, slave and simultaneous master-and-slave roles
Integrated balun which integrates a matching network and harmonics filter
SMA connector for antenna or measuring equipment
3 user LEDs
2 user buttons
3D digital accelerometer and 3D digital gyroscope
MEMS pressure sensor with embedded temperature sensor
Battery holder
JTAG debug connector
USB to serial bridge for providing I/O channel with the BlueNRG-1 device
Jumper for measuring current for BlueNRG-1 only
RoHS compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-BLUEMIC-1

Ultra-low power Bluetooth® low energy microphone based on SPBTLE-1S certified module

Quick view

Key Features

Bluetooth^® SMART small form factor board based on the SPBTLE-1S module, Bluetooth v4.2 compliant
On-board SPBTLE-1S module, based on BlueNRG-1, Bluetooth low energy application processor system on chip embedding:
- an ultra-low power ARM^® Cortex^® -M0 32-bit core architecture
- programmable embedded 160 KB Flash
- 24 KB embedded RAM with data retention
On-board MP34DT05-A (or MP34DT04-C1 in the first generation board) digital MEMS microphone
On-board LSM6DSL: MEMS 3D accelerometer (±2 / ±4 / ±8 / ±16 g) plus 3D gyroscope (±125 / ±245 / ±500 / ±1000 / ±2000 dps)
Voltage supply: 1V8 or 3V3
Battery or USB powered
100 mAh Li-Ion battery
On-board STBC08 linear Li-Ion battery charger
SWD connector
Included in the development kit package:
- STEVAL-BLUEMIC-1
- Plastic box for housing STEVAL-BLUEMIC-1
- 100 mAh Li-Ion battery
- SWD programming cable
SW development kit for audio and inertial MEMS data streaming over BLE
ST BlueMS: Android and iOS demo App available in the respective stores
CE certified
RoHS and China RoHS compliant
Contains Transmitter Module FCC (ID: S9NSPBTLE1S) certified
Contains Transmitter Module IC (IC: 8976C-SPBTLE1S) certified

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-IDB008V2

Evaluation platform based on the BlueNRG-2

Quick view

Key Features

Bluetooth^® SMART board based on the BlueNRG-2 Bluetooth low energy system on chip
Associated BlueNRG-2 development kit SW package including firmware and documentation
Up to +8 dBm available output power (at antenna connector)
Excellent receiver sensitivity (-88 dBm)
Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
Bluetooth^® SMART v5.0 compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature
New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
SMA connector for antenna or measuring equipment
3 user LEDs
2 user buttons
3D digital accelerometer and 3D digital gyroscope
MEMS pressure sensor with embedded temperature sensor
RoHS compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

M24SR-DISCOVERY

Discovery kit for the M24SR series - Dynamic NFC/RFID tag

Quick view

Key Features

Ready-to-use printed circuit board (PCB) including:
- M24SR64-Y Dynamic NFC/RFID tag
- 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
- STM32F103RGT6 64LQFP 32-bit microcontroller, with 1Mbytes of Flash memory
- LCD Color Screen (320*200 pixels)
- Different color LEDs
- USB microB connector for board powering
- JTAG connector for microcontroller firmware upgrade and debug
- Joystick for menu selection
M24SR-DISCO-PREM specific features:
- Bluetooth module with audio outputs connected to Jack 3.5
- Headset

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

X-NUCLEO-NFC01A1

Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo

Quick view

Key Features

M24SR64-Y Dynamic NFC/RFID tag IC
NFC antenna: 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
Compatible with STM32 Nucleo boards
Equipped with Arduino UNO R3 connector
Powered through the Arduino UNO R3 connectors
3 color LEDs for general purpose

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

X-NUCLEO-IDB05A1

Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo

Quick view

Key Features

STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo
X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF)
SPBTLE-RF:
- Bluetooth Low Energy FCC and IC certified module based on Bluetooth^® SMART 4.1 network processor BlueNRG-MS
- Integrated Balun (BALF-NRG-01D3)
- Chip antenna
Compatible with STM32 Nucleo boards
Equipped with Arduino UNO R3 connector
Scalable solution, capable of cascading multiple boards for larger systems
Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware
RoHS compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-STLKT01V1

SensorTile development kit

Quick view

Key Features

Included in the development kit package:
- SensorTile module (STEVAL-STLCS01V1) with STM32L476JG, LSM6DSM, LSM303AGR, LPS22HB, MP34DT05-A, BlueNRG-MS, BALF-NRG-02D3 and LD39115J18R
- SensorTile expansion Cradle board equipped with audio DAC, USB port, STM32 Nucleo, Arduino UNO R3 and SWD connector
- SensorTile Cradle with battery charger, humidity and temperature sensor, SD memory card slot, USB port and breakaway SWD connector
- 100 mAh Li-Ion battery
- Plastic box
- SWD programming cable
Software libraries and tools
- STSW-STLKT01: SensorTile firmware package that supports sensors raw data streaming via USB, data logging on SDCard, audio acquisition and audio streaming.
- FP-SNS-ALLMEMS1 and FP-SNS-MOTENV1: STM32Cube function packs
- STBLESensor: iOS and Android demo Apps
- BlueST-SDK: iOS and Android Software Development Kit
CE certified
RoHS and China RoHS compliant
WEEE compliant
FCC (ID: S9NSTILE01) certified
IC (IC: 8976C-STILE01) certified with PMN: STEVAL-STLKT01V1; HVIN: STEVAL-STLCS01V1; HMN: STEVAL-STLCX01V1; FVIN: bluenrg_7_1_e_Mode_2-32MHz-XO32K_4M.img
TYPE certified (006-000482)

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

00 Files selected for download

Technical Documentation

Application Notes

Description	Version	Size	Action
AN5085 Cycling endurance and data retention of EEPROMs in ST25DVxxx products based on CMOS F8H process	2.0	306.83 KB	PDF
AN4653 Cycling endurance and data retention of high density EEPROM based on CMOS F8H process	1.0	267.34 KB	PDF
AN4910 Data exchange between wired (I²C) and wireless (RF ISO 15693) using fast transfer mode supported by ST25DV-I2C	2.0	598.03 KB	PDF
AN2827 Driver for double flash LED with I²C interface	1.1	812.43 KB	PDF
AN4913 Energy harvesting delivery impact on ST25DVxxx behavior during RF communication	1.0	1.05 MB	PDF
AN2866 How to design a 13.56 MHz customized antenna for ST25 NFC / RFID Tags	3.0	615.85 KB	PDF
AN2972 How to design an antenna for dynamic NFC tags	9.0	1.59 MB	PDF
AN4911 NDEF management with ST25DVxxx and ST25TVxxx products	4.0	460.67 KB	PDF
AN5385 Open load detection with STSPIN220 stepper driver	1.2	298.04 KB	PDF
AN4642 Overview of the BLE Profiles application for X-CUBE-BLE1, expansion for STM32Cube	3.0	2.31 MB	PDF
AN4433 Storing data into the NDEF memory of M24SR	2.0	507.23 KB	PDF
AN1471 What happens to the M24xxx I²C EEPROM if the I²C bus communication is stopped?	4.4	72.36 KB	PDF

AN5085

Cycling endurance and data retention of EEPROMs in ST25DVxxx products based on CMOS F8H process

Part number	Description
MP23ABS1	High performance MEMS audio sensor single ended analog bottom-port microphone
MP34DT05-A	MEMS audio sensor omnidirectional digital microphone, 64 dB SNR, -26 dBFS sensitivity, top-port, 122.5 dBSPL AOP

Part number	Description
BALF-NRG-02D3	50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
ECMF02-2BF3	Common mode filter with ESD protection for high speed serial interface
ECMF4-20A42N10	Common mode filter with ESD protection
ECMF4-2450A60N10	Common mode filter with ESD protection for High Speed Serial interface
EMIF06-MSD02N16	6-line EMI filter and ESD protection for T-Flash and micro SD card™ interfaces
EMIF08-LCD04M16	8-line L-C EMI filter and ESD protection for display interfaces
HDMI2C4-5F2	ESD protection and signal booster for HDMI source control stage interface

Part number	Description
VL53L0X	World smallest Time-of-Flight (ToF) ranging sensor
VL53L1X	Long distance ranging Time-of-Flight sensor based on ST FlightSense technology
VL6180X	Proximity sensor, gesture and ambient light sensing (ALS) module

Part number	Description
L20G20IS	2-axis gyroscope for optical image stabilization (OIS)
LIS2DH12	3-axis MEMS accelerometer, ultra-low-power, ±2g/±4g/±8g/±16g full scale, high-speed I2C/SPI digital output, embedded FIFO, high-performance acceleration sensor, VFLGA package
LIS2DW12	3-axis MEMS accelerometer, ultra low power, configurable single/double-tap recognition, free-fall, wakeup, portrait/landscape, 6D/4D orientation detections
LIS3DHH	3-axis accelerometer, ultra high resolution, low-noise, SPI 4-wire digital output, ±2.5g full-scale
LSM6DSM	iNEMO 6DoF inertial measurement unit (IMU), for smart phones with OIS / EIS and AR/VR systems. Ultra-low power, high accuracy and stability

Part number	Description
L6924U	USB compatible battery charger system with integrated power switch for Li-Ion/Li-Polymer
LDLN025	250 mA ultra-low noise LDO
STBB3J	2A, 2MHz, high efficiency dual mode buck-boost DC-DC converter
STBC02	Li-Ion linear battery charger with LDO, load switches and reset generator
STC3117	Gas gauge IC with battery charger control for handheld applications
STCF05	HIGH POWER WHITE LED DRIVER WITH I2C INTERFACE
STLA02	White LED driver for display backlight
STLQ020	200 mA ultra-low quiescent current LDO
STWBC-EP	Digital controller for wireless battery charger transmitters (WBC) in 15 W medium power applications

Part number	Description
ESDA6V1BC6	QUAD BIDIRECTIONAL TRANSIL SUPPRESSOR FOR ESD PROTECTION
ESDA7P120-1U1M	High-power transient voltage supressor (TVS)
HSP051-4N10	4-line ESD protection for high speed lines
HSP053-4M5	4-line ESD protection for high-speed lines

Part number	Description
BlueNRG-2	Bluetooth® low energy wireless system-on-chip
BlueNRG-MS	Bluetooth Low Energy Network Processor supporting Bluetooth 4.2 core specification
SPBTLE-1S	Very low power application module for Bluetooth® Smart v4.2
SPBTLE-RF	Very low power module for Bluetooth Smart v4.1

Description	Version	Size	Action
FP-AUD-BVLINK1_Quick_start_guide	1.0	3.08 MB	PDF
FP-AUD-BVLINK2_Quick_Start_Guide	1.1	2.61 MB	PDF
How to use BlueCoin with STBlueMS mobile app hand-on and LABs	1.0	5.44 MB	PDF
M24SR Product Presentation	2.1	1.27 MB	PDF
ST25DV-I2C product presentation	2.2	2.1 MB	PDF
STEVAL-BCNKT01V1 Quick start guide	1.02	1.58 MB	PDF
STEVAL-STLKT01V1 Quick start guide	2.4	2.02 MB	PDF
X-NUCLEO-IDB05A1 Quick start guide	1.6	1.42 MB	PDF

Part number	Manufacturer	Description
STSW-ST25001	ST	Application executable of the "NFC Tap" Android app for ST25 product family
STSW-ST25DV001	ST	Firmware for ST25DV-DISCOVERY kit
STSW-ST25IOS001	ST	Application executable of the "NFC Tap" iOS app for ST25 product family
STSW-ST25R004	ST	Antenna Matching Tool for ST25R NFC/HF reader family
STSW-ST25SDK001	ST	Software Development Kit for ST25 Tags and Dynamic Tags

Search History

Bookmark

Featured Videos

Technical Documentation

Presentations & Training Material

Publications and Collaterals

Embedded Software

Amplifiers and Comparators

Audio ICs

Clocks and Timers

Diodes and Rectifiers

EMI Filtering and Signal Conditioning

Imaging and Photonics Solutions

Interfaces and Transceivers

MEMS and Sensors

NFC

Power Management

Protection Devices

Wireless Transceivers, MCUs and Modules