Overview
Solutions
HW Evaluation Tools
Resources
Tools and Software
Key Products
Get Started

Heating systems are becoming increasingly complex when all the possible options – seat and cabin heaters, windshield defrost, heated/cooled compartments and glow plug heaters – are considered.

Vehicle manufacturers need a scalable set of solutions to fit the different models in their range,  optimized for enhancing comfort for both driver and passengers with accurate and energy-efficient temperature control systems.

We offer a set of VIPower® Zero series application-specific power ICs and SPC5 32-bit microcontrollers as well as protection devices to enable the development of scalable car heating systems.

 

    • Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.

      A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.

      Solution Components
      Part Number Description Status Core Products Price (US$)*
      Order / Download
      Buy All
      SPC56B-Discovery

      Key features

      • SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
      • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
      • Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
      • Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
      • Two push buttons (reset and user)
      • A potentiometers for ADC input (user)
      • Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
      • JTAG interface (2 x 7 male 100mil connector)
      • USB port (mini -B)
      • 16 MHz crystal
      • Specification:
        • Board size 100 x 65 mm
        • MCU: SPC560B54L5 - LQFP144
        • 2 extension headers 2 x 36 pin - 100 mil
        • DC connector (+12 V input)
        • Mini USB - B
        • JTAG 2 x 7 - 100 mil connector

      Show more

      Discovery Kit for SPC56 B line - with SPC560B54L5 MCU
      Active
      85.75 Buy now
      SPC5-EV-ADIS

      Key features

      • Board size 100 x 55 mm
      • Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
      • Extension headers for quick connection of M0-7 easy board
      • Extension headers for quick connection of H-Bridge easy board
      • Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
      • Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

      Show more

      Adapter board
      Active
      32.12 Buy now
      EV-VN7007AH
      VN7007AH Evaluation Board
      Active
      VN7007AHTR 4.12 Buy now
      STSW-SPC5EV-ADIS

      Key features

      • Complete Graphical User Interface (GUI) for SPC5EV-ADIS adapter board.

      Show more

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers
      Active
      -
      Software
      Part Number Software Version Marketing Status Supplier Download
      STSW-SPC5EV-ADIS 1.0.0 Active ST
      SPC56B-Discovery

      Description:

      Discovery Kit for SPC56 B line - with SPC560B54L5 MCU

      Price (US$)*

      85.75

      Key features

      • SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
      • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
      • Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
      • Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
      • Two push buttons (reset and user)
      • A potentiometers for ADC input (user)
      • Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
      • JTAG interface (2 x 7 male 100mil connector)
      • USB port (mini -B)
      • 16 MHz crystal
      • Specification:
        • Board size 100 x 65 mm
        • MCU: SPC560B54L5 - LQFP144
        • 2 extension headers 2 x 36 pin - 100 mil
        • DC connector (+12 V input)
        • Mini USB - B
        • JTAG 2 x 7 - 100 mil connector

      Show more

      SPC5-EV-ADIS

      Description:

      Adapter board

      Price (US$)*

      32.12

      Key features

      • Board size 100 x 55 mm
      • Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
      • Extension headers for quick connection of M0-7 easy board
      • Extension headers for quick connection of H-Bridge easy board
      • Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
      • Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

      Show more

      EV-VN7007AH

      Description:

      VN7007AH Evaluation Board

      Price (US$)*

      4.12
      STSW-SPC5EV-ADIS

      Description:

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

      Price (US$)*

      -
      Software

      Key features

      • Complete Graphical User Interface (GUI) for SPC5EV-ADIS adapter board.

      Show more

      Part Number Software Version Marketing Status Supplier Download
      STSW-SPC5EV-ADIS 1.0.0 Active ST
    • Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.

      A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.

      Solution Components
      Part Number Description Status Core Products Price (US$)*
      Order / Download
      Buy All
      SPC56B-Discovery

      Key features

      • SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
      • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
      • Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
      • Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
      • Two push buttons (reset and user)
      • A potentiometers for ADC input (user)
      • Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
      • JTAG interface (2 x 7 male 100mil connector)
      • USB port (mini -B)
      • 16 MHz crystal
      • Specification:
        • Board size 100 x 65 mm
        • MCU: SPC560B54L5 - LQFP144
        • 2 extension headers 2 x 36 pin - 100 mil
        • DC connector (+12 V input)
        • Mini USB - B
        • JTAG 2 x 7 - 100 mil connector

      Show more

      Discovery Kit for SPC56 B line - with SPC560B54L5 MCU
      Active
      85.75 Buy now
      SPC5-EV-ADIS

      Key features

      • Board size 100 x 55 mm
      • Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
      • Extension headers for quick connection of M0-7 easy board
      • Extension headers for quick connection of H-Bridge easy board
      • Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
      • Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

      Show more

      Adapter board
      Active
      32.12 Buy now
      STSW-SPC5EV-ADIS

      Key features

      • Complete Graphical User Interface (GUI) for SPC5EV-ADIS adapter board.

      Show more

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers
      Active
      -
      Software
      Part Number Software Version Marketing Status Supplier Download
      STSW-SPC5EV-ADIS 1.0.0 Active ST
      EV-VN7004CH

      Key features

      • Simple single IC application board dedicated for VN7004CH
      • Provides electrical connectivity and thermal heat-sinking for easy prototyping
      • General device features
        • Single channel smart high-side driver with CurrentSense analog feedback
        • Very low standby current
        • Compatible with 3 V and 5 V CMOS outputs
      • Diagnostic functions
        • Dedicated high precision proportional load current sense
        • Overload and short to ground (power limitation) indication
        • Thermal shutdown indication
        • OFF-state open-load detection
        • Output short to VCC detection
        • Sense enable/ disable
      • Protections
        • Undervoltage shutdown
        • Overvoltage clamp
        • Load current limitation
        • Self limiting of fast thermal transients
        • Loss of ground and loss of VCC
        • Reverse battery
        • Electrostatic discharge protection

      Show more

      VN7004CH Evaluation Board
      Active
      VN7004CHTR 4.12 Buy now
      SPC56B-Discovery

      Description:

      Discovery Kit for SPC56 B line - with SPC560B54L5 MCU

      Price (US$)*

      85.75

      Key features

      • SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
      • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
      • Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
      • Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
      • Two push buttons (reset and user)
      • A potentiometers for ADC input (user)
      • Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
      • JTAG interface (2 x 7 male 100mil connector)
      • USB port (mini -B)
      • 16 MHz crystal
      • Specification:
        • Board size 100 x 65 mm
        • MCU: SPC560B54L5 - LQFP144
        • 2 extension headers 2 x 36 pin - 100 mil
        • DC connector (+12 V input)
        • Mini USB - B
        • JTAG 2 x 7 - 100 mil connector

      Show more

      SPC5-EV-ADIS

      Description:

      Adapter board

      Price (US$)*

      32.12

      Key features

      • Board size 100 x 55 mm
      • Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
      • Extension headers for quick connection of M0-7 easy board
      • Extension headers for quick connection of H-Bridge easy board
      • Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
      • Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

      Show more

      STSW-SPC5EV-ADIS

      Description:

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

      Price (US$)*

      -
      Software

      Key features

      • Complete Graphical User Interface (GUI) for SPC5EV-ADIS adapter board.

      Show more

      Part Number Software Version Marketing Status Supplier Download
      STSW-SPC5EV-ADIS 1.0.0 Active ST
      EV-VN7004CH

      Description:

      VN7004CH Evaluation Board

      Price (US$)*

      4.12

      Key features

      • Simple single IC application board dedicated for VN7004CH
      • Provides electrical connectivity and thermal heat-sinking for easy prototyping
      • General device features
        • Single channel smart high-side driver with CurrentSense analog feedback
        • Very low standby current
        • Compatible with 3 V and 5 V CMOS outputs
      • Diagnostic functions
        • Dedicated high precision proportional load current sense
        • Overload and short to ground (power limitation) indication
        • Thermal shutdown indication
        • OFF-state open-load detection
        • Output short to VCC detection
        • Sense enable/ disable
      • Protections
        • Undervoltage shutdown
        • Overvoltage clamp
        • Load current limitation
        • Self limiting of fast thermal transients
        • Loss of ground and loss of VCC
        • Reverse battery
        • Electrostatic discharge protection

      Show more

    • Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.

      A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.

      Solution Components
      Part Number Description Status Core Products Price (US$)*
      Order / Download
      SPC56B-Discovery

      Key features

      • SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
      • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
      • Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
      • Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
      • Two push buttons (reset and user)
      • A potentiometers for ADC input (user)
      • Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
      • JTAG interface (2 x 7 male 100mil connector)
      • USB port (mini -B)
      • 16 MHz crystal
      • Specification:
        • Board size 100 x 65 mm
        • MCU: SPC560B54L5 - LQFP144
        • 2 extension headers 2 x 36 pin - 100 mil
        • DC connector (+12 V input)
        • Mini USB - B
        • JTAG 2 x 7 - 100 mil connector

      Show more

      Discovery Kit for SPC56 B line - with SPC560B54L5 MCU
      Active
      85.75 Buy now
      SPC5-EV-ADIS

      Key features

      • Board size 100 x 55 mm
      • Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
      • Extension headers for quick connection of M0-7 easy board
      • Extension headers for quick connection of H-Bridge easy board
      • Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
      • Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

      Show more

      Adapter board
      Active
      32.12 Buy now
      STSW-SPC5EV-ADIS

      Key features

      • Complete Graphical User Interface (GUI) for SPC5EV-ADIS adapter board.

      Show more

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers
      Active
      -
      Software
      Part Number Software Version Marketing Status Supplier Download
      STSW-SPC5EV-ADIS 1.0.0 Active ST
      EV-VN7003ALH

      Key features

      • Simple single IC application board dedicated for VN7003ALH
      • Provides electrical connectivity and thermal heat-sinking for easy prototyping
      • General device features
        • Single channel smart high-side driver with CurrentSense analog feedback
        • Very low standby current
        • Compatible with 3 V and 5 V CMOS outputs
        • Extreme low voltage operation for deep cold cranking applications (compliant with LV124, revision 2013)
      • Diagnostic functions
        • Dedicated high precision proportional load current sense
        • Overload and short to ground (power limitation) indication
        • Thermal shutdown indication
        • OFF-state open-load detection
        • Output short to VCC detection
      • Protections
        • Undervoltage shutdown
        • Overvoltage clamp
        • Load current limitation
        • Self limiting of fast thermal transients
        • Loss of ground and loss of VCC
        • Configurable latch-off on overtemperature or power limitation
        • Reverse battery
        • Electrostatic discharge protection

      Show more

      VN7003ALH Evaluation Board
      Active
      VN7003ALHTR 3.92
      SPC56B-Discovery

      Description:

      Discovery Kit for SPC56 B line - with SPC560B54L5 MCU

      Price (US$)*

      85.75

      Key features

      • SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
      • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
      • Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
      • Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
      • Two push buttons (reset and user)
      • A potentiometers for ADC input (user)
      • Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
      • JTAG interface (2 x 7 male 100mil connector)
      • USB port (mini -B)
      • 16 MHz crystal
      • Specification:
        • Board size 100 x 65 mm
        • MCU: SPC560B54L5 - LQFP144
        • 2 extension headers 2 x 36 pin - 100 mil
        • DC connector (+12 V input)
        • Mini USB - B
        • JTAG 2 x 7 - 100 mil connector

      Show more

      SPC5-EV-ADIS

      Description:

      Adapter board

      Price (US$)*

      32.12

      Key features

      • Board size 100 x 55 mm
      • Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
      • Extension headers for quick connection of M0-7 easy board
      • Extension headers for quick connection of H-Bridge easy board
      • Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
      • Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

      Show more

      STSW-SPC5EV-ADIS

      Description:

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

      Price (US$)*

      -
      Software

      Key features

      • Complete Graphical User Interface (GUI) for SPC5EV-ADIS adapter board.

      Show more

      Part Number Software Version Marketing Status Supplier Download
      STSW-SPC5EV-ADIS 1.0.0 Active ST
      EV-VN7003ALH

      Description:

      VN7003ALH Evaluation Board

      Price (US$)*

      3.92

      Key features

      • Simple single IC application board dedicated for VN7003ALH
      • Provides electrical connectivity and thermal heat-sinking for easy prototyping
      • General device features
        • Single channel smart high-side driver with CurrentSense analog feedback
        • Very low standby current
        • Compatible with 3 V and 5 V CMOS outputs
        • Extreme low voltage operation for deep cold cranking applications (compliant with LV124, revision 2013)
      • Diagnostic functions
        • Dedicated high precision proportional load current sense
        • Overload and short to ground (power limitation) indication
        • Thermal shutdown indication
        • OFF-state open-load detection
        • Output short to VCC detection
      • Protections
        • Undervoltage shutdown
        • Overvoltage clamp
        • Load current limitation
        • Self limiting of fast thermal transients
        • Loss of ground and loss of VCC
        • Configurable latch-off on overtemperature or power limitation
        • Reverse battery
        • Electrostatic discharge protection

      Show more

    • Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.

      A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.

      Solution Components
      Part Number Description Status Core Products Price (US$)*
      Order / Download
      Buy All
      SPC56B-Discovery

      Key features

      • SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
      • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
      • Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
      • Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
      • Two push buttons (reset and user)
      • A potentiometers for ADC input (user)
      • Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
      • JTAG interface (2 x 7 male 100mil connector)
      • USB port (mini -B)
      • 16 MHz crystal
      • Specification:
        • Board size 100 x 65 mm
        • MCU: SPC560B54L5 - LQFP144
        • 2 extension headers 2 x 36 pin - 100 mil
        • DC connector (+12 V input)
        • Mini USB - B
        • JTAG 2 x 7 - 100 mil connector

      Show more

      Discovery Kit for SPC56 B line - with SPC560B54L5 MCU
      Active
      85.75 Buy now
      SPC5-EV-ADIS

      Key features

      • Board size 100 x 55 mm
      • Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
      • Extension headers for quick connection of M0-7 easy board
      • Extension headers for quick connection of H-Bridge easy board
      • Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
      • Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

      Show more

      Adapter board
      Active
      32.12 Buy now
      EV-VN7004CLH

      Key features

      • Simple single IC application board dedicated for VN7004CLH
      • Provides electrical connectivity and thermal heat-sinking for easy prototyping
      • General device features
        • Single channel smart high-side driver with CurrentSense analog feedback
        • Very low standby current
        • Compatible with 3 V and 5 V CMOS outputs
      • Diagnostic functions
        • Dedicated high precision proportional load current sense
        • Overload and short to ground (power limitation) indication
        • Thermal shutdown indication
        • OFF-state open-load detection
        • Output short to VCC detection
      • Protections
        • Undervoltage shutdown
        • Overvoltage clamp
        • Load current limitation
        • Self limiting of fast thermal transients
        • Loss of ground and loss of VCC
        • Configurable latch-off on overtemperature or power limitation
        • Reverse battery
        • Electrostatic discharge protection

      Show more

      VN7004CLH Evaluation Board
      Active
      VN7004CLHTR 4.12 Buy now
      STSW-SPC5EV-ADIS

      Key features

      • Complete Graphical User Interface (GUI) for SPC5EV-ADIS adapter board.

      Show more

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers
      Active
      -
      Software
      Part Number Software Version Marketing Status Supplier Download
      STSW-SPC5EV-ADIS 1.0.0 Active ST
      SPC56B-Discovery

      Description:

      Discovery Kit for SPC56 B line - with SPC560B54L5 MCU

      Price (US$)*

      85.75

      Key features

      • SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
      • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
      • Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
      • Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
      • Two push buttons (reset and user)
      • A potentiometers for ADC input (user)
      • Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
      • JTAG interface (2 x 7 male 100mil connector)
      • USB port (mini -B)
      • 16 MHz crystal
      • Specification:
        • Board size 100 x 65 mm
        • MCU: SPC560B54L5 - LQFP144
        • 2 extension headers 2 x 36 pin - 100 mil
        • DC connector (+12 V input)
        • Mini USB - B
        • JTAG 2 x 7 - 100 mil connector

      Show more

      SPC5-EV-ADIS

      Description:

      Adapter board

      Price (US$)*

      32.12

      Key features

      • Board size 100 x 55 mm
      • Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
      • Extension headers for quick connection of M0-7 easy board
      • Extension headers for quick connection of H-Bridge easy board
      • Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
      • Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

      Show more

      EV-VN7004CLH

      Description:

      VN7004CLH Evaluation Board

      Price (US$)*

      4.12

      Key features

      • Simple single IC application board dedicated for VN7004CLH
      • Provides electrical connectivity and thermal heat-sinking for easy prototyping
      • General device features
        • Single channel smart high-side driver with CurrentSense analog feedback
        • Very low standby current
        • Compatible with 3 V and 5 V CMOS outputs
      • Diagnostic functions
        • Dedicated high precision proportional load current sense
        • Overload and short to ground (power limitation) indication
        • Thermal shutdown indication
        • OFF-state open-load detection
        • Output short to VCC detection
      • Protections
        • Undervoltage shutdown
        • Overvoltage clamp
        • Load current limitation
        • Self limiting of fast thermal transients
        • Loss of ground and loss of VCC
        • Configurable latch-off on overtemperature or power limitation
        • Reverse battery
        • Electrostatic discharge protection

      Show more

      STSW-SPC5EV-ADIS

      Description:

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

      Price (US$)*

      -
      Software

      Key features

      • Complete Graphical User Interface (GUI) for SPC5EV-ADIS adapter board.

      Show more

      Part Number Software Version Marketing Status Supplier Download
      STSW-SPC5EV-ADIS 1.0.0 Active ST
    • Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.

      A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.

      Solution Components
      Part Number Description Status Core Products Price (US$)*
      Order / Download
      SPC56B-Discovery

      Key features

      • SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
      • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
      • Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
      • Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
      • Two push buttons (reset and user)
      • A potentiometers for ADC input (user)
      • Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
      • JTAG interface (2 x 7 male 100mil connector)
      • USB port (mini -B)
      • 16 MHz crystal
      • Specification:
        • Board size 100 x 65 mm
        • MCU: SPC560B54L5 - LQFP144
        • 2 extension headers 2 x 36 pin - 100 mil
        • DC connector (+12 V input)
        • Mini USB - B
        • JTAG 2 x 7 - 100 mil connector

      Show more

      Discovery Kit for SPC56 B line - with SPC560B54L5 MCU
      Active
      85.75 Buy now
      SPC5-EV-ADIS

      Key features

      • Board size 100 x 55 mm
      • Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
      • Extension headers for quick connection of M0-7 easy board
      • Extension headers for quick connection of H-Bridge easy board
      • Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
      • Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

      Show more

      Adapter board
      Active
      32.12 Buy now
      EV-VN7007ALH

      Key features

      • Simple single IC application board dedicated for VN7007ALH
      • Provides electrical connectivity and thermal heat-sinking for easy prototyping
      • General device features
        • Single channel smart high-side driver with CurrentSense analog feedback
        • Very low standby current
        • Compatible with 3 V and 5 V CMOS outputs
      • Diagnostic functions
        • Dedicated high precision proportional load current sense
        • Overload and short to ground (power limitation) indication
        • Thermal shutdown indication
        • OFF-state open-load detection
        • Output short to VCC detection
      • Protections
        • Undervoltage shutdown
        • Overvoltage clamp
        • Load current limitation
        • Self limiting of fast thermal transients
        • Loss of ground and loss of VCC
        • Configurable latch-off on overtemperature or power limitation
        • Reverse battery
        • Electrostatic discharge protection

      Show more

      VN7007ALH Evaluation Board
      Active
      VN7007ALHTR 3.92
      STSW-SPC5EV-ADIS

      Key features

      • Complete Graphical User Interface (GUI) for SPC5EV-ADIS adapter board.

      Show more

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers
      Active
      -
      Software
      Part Number Software Version Marketing Status Supplier Download
      STSW-SPC5EV-ADIS 1.0.0 Active ST
      SPC56B-Discovery

      Description:

      Discovery Kit for SPC56 B line - with SPC560B54L5 MCU

      Price (US$)*

      85.75

      Key features

      • SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
      • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
      • Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
      • Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
      • Two push buttons (reset and user)
      • A potentiometers for ADC input (user)
      • Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
      • JTAG interface (2 x 7 male 100mil connector)
      • USB port (mini -B)
      • 16 MHz crystal
      • Specification:
        • Board size 100 x 65 mm
        • MCU: SPC560B54L5 - LQFP144
        • 2 extension headers 2 x 36 pin - 100 mil
        • DC connector (+12 V input)
        • Mini USB - B
        • JTAG 2 x 7 - 100 mil connector

      Show more

      SPC5-EV-ADIS

      Description:

      Adapter board

      Price (US$)*

      32.12

      Key features

      • Board size 100 x 55 mm
      • Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
      • Extension headers for quick connection of M0-7 easy board
      • Extension headers for quick connection of H-Bridge easy board
      • Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
      • Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

      Show more

      EV-VN7007ALH

      Description:

      VN7007ALH Evaluation Board

      Price (US$)*

      3.92

      Key features

      • Simple single IC application board dedicated for VN7007ALH
      • Provides electrical connectivity and thermal heat-sinking for easy prototyping
      • General device features
        • Single channel smart high-side driver with CurrentSense analog feedback
        • Very low standby current
        • Compatible with 3 V and 5 V CMOS outputs
      • Diagnostic functions
        • Dedicated high precision proportional load current sense
        • Overload and short to ground (power limitation) indication
        • Thermal shutdown indication
        • OFF-state open-load detection
        • Output short to VCC detection
      • Protections
        • Undervoltage shutdown
        • Overvoltage clamp
        • Load current limitation
        • Self limiting of fast thermal transients
        • Loss of ground and loss of VCC
        • Configurable latch-off on overtemperature or power limitation
        • Reverse battery
        • Electrostatic discharge protection

      Show more

      STSW-SPC5EV-ADIS

      Description:

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

      Price (US$)*

      -
      Software

      Key features

      • Complete Graphical User Interface (GUI) for SPC5EV-ADIS adapter board.

      Show more

      Part Number Software Version Marketing Status Supplier Download
      STSW-SPC5EV-ADIS 1.0.0 Active ST
    • Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.

      A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.

      Solution Components
      Part Number Description Status Core Products Price (US$)*
      Order / Download
      SPC56B-Discovery

      Key features

      • SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
      • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
      • Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
      • Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
      • Two push buttons (reset and user)
      • A potentiometers for ADC input (user)
      • Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
      • JTAG interface (2 x 7 male 100mil connector)
      • USB port (mini -B)
      • 16 MHz crystal
      • Specification:
        • Board size 100 x 65 mm
        • MCU: SPC560B54L5 - LQFP144
        • 2 extension headers 2 x 36 pin - 100 mil
        • DC connector (+12 V input)
        • Mini USB - B
        • JTAG 2 x 7 - 100 mil connector

      Show more

      Discovery Kit for SPC56 B line - with SPC560B54L5 MCU
      Active
      85.75 Buy now
      SPC5-EV-ADIS

      Key features

      • Board size 100 x 55 mm
      • Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
      • Extension headers for quick connection of M0-7 easy board
      • Extension headers for quick connection of H-Bridge easy board
      • Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
      • Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

      Show more

      Adapter board
      Active
      32.12 Buy now
      EV-VN7003AH

      Key features

      • Simple single IC application board dedicated for VN7003AH
      • Provides electrical connectivity and thermal heat-sinking for easy prototyping
      • General device features
        • Single channel smart high-side driver with CurrentSense analog feedback
        • Very low standby current
        • Compatible with 3 V and 5 V CMOS outputs
        • Extreme low voltage operation for deep cold cranking applications (compliant with LV124, revision 2013)
      • Diagnostic functions
        • Dedicated high precision proportional load current sense
        • Overload and short to ground (power limitation) indication
        • Thermal shutdown indication
        • OFF-state open-load detection
        • Output short to VCC detection
        • Sense enable/ disable
      • Protections
        • Undervoltage shutdown
        • Overvoltage clamp
        • Load current limitation
        • Self limiting of fast thermal transients
        • Loss of ground and loss of VCC
        • Reverse battery
        • Electrostatic discharge protection

      Show more

      VN7003AH Evaluation Board
      Active
      VN7003AHTR 3.92
      STSW-SPC5EV-ADIS

      Key features

      • Complete Graphical User Interface (GUI) for SPC5EV-ADIS adapter board.

      Show more

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers
      Active
      -
      Software
      Part Number Software Version Marketing Status Supplier Download
      STSW-SPC5EV-ADIS 1.0.0 Active ST
      SPC56B-Discovery

      Description:

      Discovery Kit for SPC56 B line - with SPC560B54L5 MCU

      Price (US$)*

      85.75

      Key features

      • SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
      • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
      • Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
      • Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
      • Two push buttons (reset and user)
      • A potentiometers for ADC input (user)
      • Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
      • JTAG interface (2 x 7 male 100mil connector)
      • USB port (mini -B)
      • 16 MHz crystal
      • Specification:
        • Board size 100 x 65 mm
        • MCU: SPC560B54L5 - LQFP144
        • 2 extension headers 2 x 36 pin - 100 mil
        • DC connector (+12 V input)
        • Mini USB - B
        • JTAG 2 x 7 - 100 mil connector

      Show more

      SPC5-EV-ADIS

      Description:

      Adapter board

      Price (US$)*

      32.12

      Key features

      • Board size 100 x 55 mm
      • Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
      • Extension headers for quick connection of M0-7 easy board
      • Extension headers for quick connection of H-Bridge easy board
      • Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
      • Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

      Show more

      EV-VN7003AH

      Description:

      VN7003AH Evaluation Board

      Price (US$)*

      3.92

      Key features

      • Simple single IC application board dedicated for VN7003AH
      • Provides electrical connectivity and thermal heat-sinking for easy prototyping
      • General device features
        • Single channel smart high-side driver with CurrentSense analog feedback
        • Very low standby current
        • Compatible with 3 V and 5 V CMOS outputs
        • Extreme low voltage operation for deep cold cranking applications (compliant with LV124, revision 2013)
      • Diagnostic functions
        • Dedicated high precision proportional load current sense
        • Overload and short to ground (power limitation) indication
        • Thermal shutdown indication
        • OFF-state open-load detection
        • Output short to VCC detection
        • Sense enable/ disable
      • Protections
        • Undervoltage shutdown
        • Overvoltage clamp
        • Load current limitation
        • Self limiting of fast thermal transients
        • Loss of ground and loss of VCC
        • Reverse battery
        • Electrostatic discharge protection

      Show more

      STSW-SPC5EV-ADIS

      Description:

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

      Price (US$)*

      -
      Software

      Key features

      • Complete Graphical User Interface (GUI) for SPC5EV-ADIS adapter board.

      Show more

      Part Number Software Version Marketing Status Supplier Download
      STSW-SPC5EV-ADIS 1.0.0 Active ST

Part Number
Description
EV-VN7004CLH VN7004CLH Evaluation Board Quick view

Key Features

  • Simple single IC application board dedicated for VN7004CLH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Configurable latch-off on overtemperature or power limitation
    • Reverse battery
    • Electrostatic discharge protection

Show More

EV-VN7004CH VN7004CH Evaluation Board Quick view

Key Features

  • Simple single IC application board dedicated for VN7004CH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/ disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Reverse battery
    • Electrostatic discharge protection

Show More

STEVAL-OET003V1 Evaluation board for automotive-grade ESD protection Quick view

Key Features

  • Input voltage 5 V
  • 12 V output, step-up converter for transceiver supply voltage
  • LIN transceiver
  • CAN transceiver
  • Automotive-grade ESD protection
  • IEC61000-4-2 compatibility

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
SPC5-UDEDEBG PLS JTAG debugger software full license or license renewal Quick view

Key Features

  • Supports both SPC5-UDESTK standalone and the equivalent version embedded into Discovery board.
  • Supports SPC5x MCUs
  • Supports Multicore, eTPU and GTM debugging
  • Includes FLASH programming capability
  • Support service provided through STMicroelectronics

Show More

EV-VN7003ALH VN7003ALH Evaluation Board Quick view

Key Features

  • Simple single IC application board dedicated for VN7003ALH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
    • Extreme low voltage operation for deep cold cranking applications (compliant with LV124, revision 2013)
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Configurable latch-off on overtemperature or power limitation
    • Reverse battery
    • Electrostatic discharge protection

Show More

EV-VN7003AH VN7003AH Evaluation Board Quick view

Key Features

  • Simple single IC application board dedicated for VN7003AH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
    • Extreme low voltage operation for deep cold cranking applications (compliant with LV124, revision 2013)
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/ disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Reverse battery
    • Electrostatic discharge protection

Show More

SPC582B-DIS Discovery Kit for SPC582 B line Quick view

Key Features

  • SPC582B 32-bit z2 core @80Mhz CPU, 32-bit Power Architecture® Technology CPU, 1MB Code Flash in eQFP64 package.
  • On-board USB-JTAG PLS debugger and dedicated optional connector to plug a stand-alone JTAG debugger.
  • USB Virtual Communication port.
  • Two types of extension resources:
    • Arduino Uno Revision 3 connectivity
    • Extension headers for all device pins and for quick connection to prototyping expansion boards, additional modules and evaluation probing.
  • Flexible board power supply:
    • USB port (mini B - 5V)
    • external sources (DC): 7÷12 V, 5V or 3.3V and 5V
  • Two push buttons: USER and RESET
  • Eight LEDs
    • 3 Integrated Programmer/Debugger
    • 3 LEDs User
    • 1 Reset
    • 1 Power LED: +5V
  • 40MHz Crystal

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
SPC58EC-DISP Discovery Kit for SPC58EC - C line Quick view

Key Features

  • SPC58EC80E5 is a 32-bit Power Architecture®e200z4d dual core, 4224 kB flash + 128 kB data flash) in eTQFP144.
  • Integrated programmer - debugger.
  • JTAG interface (Standard 7x2 male 100mil).
  • 2 ISO CAN FD port (DB9 connector).
  • 1 Ethernet port.
  • 1 FlexRay, 1 LIN (with transceiver).
  • 1 USB virtual COM Port.
  • Connectors Arduino UNO R3-compatible.
  • 3 Push buttons, 3 LEDs for user purpose.
  • 2 potentiometers for ADC quick evaluation.
  • Reset push button.
  • All GPIOs and signals accessible by a 4x37 0.1" pin grid array allowing connection of the additional boards.
  • 12MHz crystal.
  • Board Supply: 12 VDC (external power
  • supply).
  • Board size 150 x 101 mm.

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
SAMPLES-AUTOPMIC Automotive Voltage Regulators & System Basis Chip Evaluation Tool Quick view

Key Features

  • Immediate evaluation of Voltage Regulators, Power Management and Multichannel Power Management with a selection of samples.
  • The kit includes
    • 10 samples

Show More

EV-VN7007ALH VN7007ALH Evaluation Board Quick view

Key Features

  • Simple single IC application board dedicated for VN7007ALH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Configurable latch-off on overtemperature or power limitation
    • Reverse battery
    • Electrostatic discharge protection

Show More

EV-VN7007AH VN7007AH Evaluation Board
Part Number
EV-VN7004CLH

VN7004CLH Evaluation Board

Key Features

  • Simple single IC application board dedicated for VN7004CLH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Configurable latch-off on overtemperature or power limitation
    • Reverse battery
    • Electrostatic discharge protection

Show More

EV-VN7004CH

VN7004CH Evaluation Board

Key Features

  • Simple single IC application board dedicated for VN7004CH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/ disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Reverse battery
    • Electrostatic discharge protection

Show More

STEVAL-OET003V1

Evaluation board for automotive-grade ESD protection

Key Features

  • Input voltage 5 V
  • 12 V output, step-up converter for transceiver supply voltage
  • LIN transceiver
  • CAN transceiver
  • Automotive-grade ESD protection
  • IEC61000-4-2 compatibility

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
SPC5-UDEDEBG

PLS JTAG debugger software full license or license renewal

Key Features

  • Supports both SPC5-UDESTK standalone and the equivalent version embedded into Discovery board.
  • Supports SPC5x MCUs
  • Supports Multicore, eTPU and GTM debugging
  • Includes FLASH programming capability
  • Support service provided through STMicroelectronics

Show More

EV-VN7003ALH

VN7003ALH Evaluation Board

Key Features

  • Simple single IC application board dedicated for VN7003ALH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
    • Extreme low voltage operation for deep cold cranking applications (compliant with LV124, revision 2013)
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Configurable latch-off on overtemperature or power limitation
    • Reverse battery
    • Electrostatic discharge protection

Show More

EV-VN7003AH

VN7003AH Evaluation Board

Key Features

  • Simple single IC application board dedicated for VN7003AH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
    • Extreme low voltage operation for deep cold cranking applications (compliant with LV124, revision 2013)
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
    • Sense enable/ disable
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Reverse battery
    • Electrostatic discharge protection

Show More

SPC582B-DIS

Discovery Kit for SPC582 B line

Key Features

  • SPC582B 32-bit z2 core @80Mhz CPU, 32-bit Power Architecture® Technology CPU, 1MB Code Flash in eQFP64 package.
  • On-board USB-JTAG PLS debugger and dedicated optional connector to plug a stand-alone JTAG debugger.
  • USB Virtual Communication port.
  • Two types of extension resources:
    • Arduino Uno Revision 3 connectivity
    • Extension headers for all device pins and for quick connection to prototyping expansion boards, additional modules and evaluation probing.
  • Flexible board power supply:
    • USB port (mini B - 5V)
    • external sources (DC): 7÷12 V, 5V or 3.3V and 5V
  • Two push buttons: USER and RESET
  • Eight LEDs
    • 3 Integrated Programmer/Debugger
    • 3 LEDs User
    • 1 Reset
    • 1 Power LED: +5V
  • 40MHz Crystal

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
SPC58EC-DISP

Discovery Kit for SPC58EC - C line

Key Features

  • SPC58EC80E5 is a 32-bit Power Architecture®e200z4d dual core, 4224 kB flash + 128 kB data flash) in eTQFP144.
  • Integrated programmer - debugger.
  • JTAG interface (Standard 7x2 male 100mil).
  • 2 ISO CAN FD port (DB9 connector).
  • 1 Ethernet port.
  • 1 FlexRay, 1 LIN (with transceiver).
  • 1 USB virtual COM Port.
  • Connectors Arduino UNO R3-compatible.
  • 3 Push buttons, 3 LEDs for user purpose.
  • 2 potentiometers for ADC quick evaluation.
  • Reset push button.
  • All GPIOs and signals accessible by a 4x37 0.1" pin grid array allowing connection of the additional boards.
  • 12MHz crystal.
  • Board Supply: 12 VDC (external power
  • supply).
  • Board size 150 x 101 mm.

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
SAMPLES-AUTOPMIC

Automotive Voltage Regulators & System Basis Chip Evaluation Tool

Key Features

  • Immediate evaluation of Voltage Regulators, Power Management and Multichannel Power Management with a selection of samples.
  • The kit includes
    • 10 samples

Show More

EV-VN7007ALH

VN7007ALH Evaluation Board

Key Features

  • Simple single IC application board dedicated for VN7007ALH
  • Provides electrical connectivity and thermal heat-sinking for easy prototyping
  • General device features
    • Single channel smart high-side driver with CurrentSense analog feedback
    • Very low standby current
    • Compatible with 3 V and 5 V CMOS outputs
  • Diagnostic functions
    • Dedicated high precision proportional load current sense
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
    • OFF-state open-load detection
    • Output short to VCC detection
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Loss of ground and loss of VCC
    • Configurable latch-off on overtemperature or power limitation
    • Reverse battery
    • Electrostatic discharge protection

Show More

EV-VN7007AH

VN7007AH Evaluation Board

00 Files selected for download

Technical Documentation

    • Description Version Size Action
      AN4434
      CMOS F8H automotive EEPROM cycling endurance and data retention
      4.0
      367.97 KB
      PDF
      AN5274
      EVALKITSTKNX user guide and performances report
      2.0
      12.79 MB
      PDF
      AN2440
      Embedded ECC in F8H process automotive EEPROM: device architecture and related application guidelines
      5.0
      356.4 KB
      PDF
      AN4218
      Hardware design guideline power supply and voltage measurement
      3.0
      1.4 MB
      PDF
      AN3399
      L99PM62GXP external voltage regulation with bipolar transistor
      2.2
      887.57 KB
      PDF
      AN2689
      Protection of automotive electronics from electrical hazards, guidelines for design and component selection
      3.1
      797.51 KB
      PDF
      AN1596
      VIPower: high side drivers for automotive
      3.2
      300.61 KB
      PDF
      AN4434

      CMOS F8H automotive EEPROM cycling endurance and data retention

      AN5274

      EVALKITSTKNX user guide and performances report

      AN2440

      Embedded ECC in F8H process automotive EEPROM: device architecture and related application guidelines

      AN4218

      Hardware design guideline power supply and voltage measurement

      AN3399

      L99PM62GXP external voltage regulation with bipolar transistor

      AN2689

      Protection of automotive electronics from electrical hazards, guidelines for design and component selection

      AN1596

      VIPower: high side drivers for automotive

    • Description Version Size Action
      TN0897
      ST SPI protocol
      2.3
      421.19 KB
      PDF
      TN0897

      ST SPI protocol

    • Description Version Size Action
      UM1922
      VIPower® M0-7 standard high-side drivers hardware design guide
      2.0
      10.08 MB
      PDF
      UM1922

      VIPower® M0-7 standard high-side drivers hardware design guide

Publications and Collaterals

    • Description Version Size Action
      A798x, A597x switching regulators for car power management 1.0
      714.2 KB
      PDF
      Automotive 600V RQ Ultrafast diode series - soft reverse recovery and low Vf - for output circuits 1.0
      718.85 KB
      PDF
      SOD123Flat AEC-Q101-qualified power Schottky diodes 1.1
      1.39 MB
      PDF
      VIPower Zero series - Innovative smart power switches for high-current applications 1.0
      291.96 KB
      PDF

      A798x, A597x switching regulators for car power management

      Automotive 600V RQ Ultrafast diode series - soft reverse recovery and low Vf - for output circuits

      SOD123Flat AEC-Q101-qualified power Schottky diodes

      VIPower Zero series - Innovative smart power switches for high-current applications

    • Description Version Size Action
      All you need to drive SPC56 32-bit power architecture MCUs 1.0
      1.42 MB
      PDF
      Driving smart power in automotive 1.0
      1.24 MB
      PDF
      VIPower M0-7 - Miniaturized high-side driver family 1.0
      1.29 MB
      PDF

      All you need to drive SPC56 32-bit power architecture MCUs

      Driving smart power in automotive

      VIPower M0-7 - Miniaturized high-side driver family

Development Tools

    • Part Number

      Code Generator, Quick resources configurator and Eclipse development environment for SPC5 MCUs

      SPC5-UDESTK Debugging Software for Windows

      VIPower smart product finder application for Android and iOS

Embedded Software

    • Part Number

      VIP-M07-ADIS Graphical User Interface

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

      Dynamic Electro-Thermal simulator for devices in VIPower technology

eDesignSuite

Converter

Input

V This option is required. And must be less than or equal to Volt. Max [V]
V This option is required. And must be greater than or equal to Volt. Min [V]

Output Power

V This option is required and must be a number.
A This option is required and must be a number.

Diodes (Power Schottky & FERD) Smart Selector

TVS Smart Selector

Automotive Analog and Power

Part number Description
L9616 High Speed Can Bus Transceiver
L99PM62GXP Power Management IC with LIN and high speed CAN
L99PM72GXP Advanced power management system IC with embedded LIN and high speed CAN transceiver supporting CAN Partial Networking
VN7003AH High-side driver with Current Sense analog feedback for automotive applications
VN7003ALH Single channel 3 mOhm High-side driver with Current Sense analog feedback for automotive applications
VN7004CH High-side driver with CurrentSense analog feedback for automotive applications
VN7004CLH High-side driver with CurrentSense analog feedback for automotive applications
VN7007AH High side driver with current sense analog feedback for automotive applications
Part number
High Speed Can Bus Transceiver
Power Management IC with LIN and high speed CAN
Advanced power management system IC with embedded LIN and high speed CAN transceiver supporting CAN Partial Networking
High-side driver with Current Sense analog feedback for automotive applications
Single channel 3 mOhm High-side driver with Current Sense analog feedback for automotive applications
High-side driver with CurrentSense analog feedback for automotive applications
High-side driver with CurrentSense analog feedback for automotive applications
High side driver with current sense analog feedback for automotive applications

Automotive Microcontrollers

Part number Description
SPC564B74L8 32-bit Power Architecture MCU for Automotive Body and Gateway Applications
SPC584B70E7 32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family
SPC58EC80C3 32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family
Part number
32-bit Power Architecture MCU for Automotive Body and Gateway Applications
32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family
32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family
Support & Feedback