Overview
Solutions
HW Evaluation Tools
Resources
Tools and Software
Key Products
Get Started

Patient Monitoring equipment provides medical staff with the means to continuously observe a patient’s vital signs, such as the heart’s electrical activity with an electrocardiogram (ECG), over an extended period of time. They come in a variety of designs including bed-side monitors for hospital use and portable devices for home use.

ST provides a large variety of MEMS sensors including environmental and motion sensors to assess a patient’s posture. To help developers design optimized patient monitoring systems, we also offer low-power and high-performance STM32 microcontrollers, high-precision operational amplifiers and a variety of AC-DC and DC-DC power management and supply ICs as well as wireless connectivity solutions.

    • Part Number Description Status Core Products Price (US$)*
      Order / Download
      Teseo-LIV3F

      Key features

      • Simultaneously multiconstellation
      • -163 dBm navigation sensitivity
      • 1.5 m CEP accuracy positioning
      • 16 Mbit embedded Flash for data logging and FW upgrade
      • 2.1 V to 4.3 V supply voltage range
      • Tiny LCC 18 pin package (9.7x10.1)
      • Operating temperature (-40°, 85°C)
      • Free FW configuration
      • 17 μW standby current and 75 mW tracking power consumption

      Show more

      Tiny GNSS module
      Active
      13.94 Buy now
      EVB-LIV3F

      Key features

      • ST Teseo-LIV3F GNSS platform
      • Multiconstellation GNSS: GPS, Galileo Glonass, Beidou, QZSS supported
      • USB Power Supply and battery charge
      • Internal battery footprint for standalone usage
      • ON/OFF and Reset buttons available
      • NMEA over
        • UART by USB
        • I2C by connector
      • PPS output
      • Leds:
        • PPS
        • Power

      Show more

      TESEO LIV3F module evaluation board
      Active
      165.38 Buy now
      TESEO-SUITE

      Key features

      • Multiple GNSS tracer
      • Multiple protocol support
      • GNSS firmware configuration tool
      • GNSS flashing tool
      • Dead reckoning panel
      • NMEA diagnostic tool
      • Satellites signal monitoring viewer
      • Map viewer
      • Log viewer

      Show more

      PC software tool to manage, configure and evaluate the performances of Teseo GNSS family
      Active
      -
      Software
      Part Number Software Version Marketing Status Supplier Download
      TESEO-SUITE 5.2.3 Active ST
      Teseo-LIV3F

      Description:

      Tiny GNSS module

      Price (US$)*

      13.94

      Key features

      • Simultaneously multiconstellation
      • -163 dBm navigation sensitivity
      • 1.5 m CEP accuracy positioning
      • 16 Mbit embedded Flash for data logging and FW upgrade
      • 2.1 V to 4.3 V supply voltage range
      • Tiny LCC 18 pin package (9.7x10.1)
      • Operating temperature (-40°, 85°C)
      • Free FW configuration
      • 17 μW standby current and 75 mW tracking power consumption

      Show more

      EVB-LIV3F

      Description:

      TESEO LIV3F module evaluation board

      Price (US$)*

      165.38

      Key features

      • ST Teseo-LIV3F GNSS platform
      • Multiconstellation GNSS: GPS, Galileo Glonass, Beidou, QZSS supported
      • USB Power Supply and battery charge
      • Internal battery footprint for standalone usage
      • ON/OFF and Reset buttons available
      • NMEA over
        • UART by USB
        • I2C by connector
      • PPS output
      • Leds:
        • PPS
        • Power

      Show more

      TESEO-SUITE

      Description:

      PC software tool to manage, configure and evaluate the performances of Teseo GNSS family

      Price (US$)*

      -
      Software

      Key features

      • Multiple GNSS tracer
      • Multiple protocol support
      • GNSS firmware configuration tool
      • GNSS flashing tool
      • Dead reckoning panel
      • NMEA diagnostic tool
      • Satellites signal monitoring viewer
      • Map viewer
      • Log viewer

      Show more

      Part Number Software Version Marketing Status Supplier Download
      TESEO-SUITE 5.2.3 Active ST

Part Number
Description
32L4R9IDISCOVERY Discovery kit with STM32L4R9AI MCU Quick view

Key Features

  • STM32L4R9AII6 microcontroller with 2-Mbyte Flash memory and 640-Kbyte RAM in UFBGA169 package
  • 1.2” 390x390 pixel AMOLED round display panel with 16-million colors depth, MIPI® DSI interface, and capacitive touch panel
  • USB OTG FS
  • On-board current measurement
  • SAI audio codec
  • ST-MEMS digital microphones
  • 16-Mbit asynchronous PSRAM
  • 512-Mbit Octo-SPI Flash
  • 2 user LEDs
  • 1 reset push-button
  • 4-direction joystick with selection button
  • Board connectors:
    • 8-bit camera
    • USB OTG FS with Micro-AB
    • Stereo headset jack including analog microphone input
    • microSD™ card
  • Board expansion connectors:
    • Arduino™ Uno V3
    • STMod+
    • PMOD
    • EXT_I2C
  • Flexible power-supply options:
    • ST-LINK USB VBUS or external sources
  • On-board ST-LINK/V2-1 debugger/programmer with USBre-enumeration capability: mass storage, virtual COM port and debug port
  • Comprehensive free software libraries and examples available with the STM32Cube package
  • Support of a wide choice of integrated development environments (IDEs), including IAR™, Keil® and GCC-based IDEs

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
B-L475E-IOT01A STM32L4 Discovery kit IoT node, low-power wireless, BLE, NFC, SubGHz, Wi-Fi Quick view

Key Features

  • Ultra-low-power STM32L4 Series MCUs based on Arm® Cortex® -M4 core with 1 Mbyte of Flash memory and 128 Kbytes of SRAM, in LQFP100 package
  • 64-Mbit Quad-SPI (Macronix) Flash memory
  • Bluetooth® V4.1 module (SPBTLE-RF)
  • Sub-GHz (868 MHz or 915 MHz) low-power-programmable RF module (SPSGRF-868 or SPSGRF-915)
  • 802.11 b/g/n compliant Wi-Fi® module from Inventek Systems (ISM43362-M3G-L44)
  • Dynamic NFC tag based on M24SR with its printed NFC antenna
  • 2 digital omnidirectional microphones (MP34DT01)
  • Capacitive digital sensor for relative humidity and temperature (HTS221)
  • High-performance 3-axis magnetometer (LIS3MDL)
  • 3D accelerometer and 3D gyroscope (LSM6DSL)
  • 260-1260 hPa absolute digital output barometer (LPS22HB)
  • Time-of-Flight and gesture-detection sensor (VL53L0X)
  • 2 push-buttons (user and reset)
  • USB OTG FS with Micro-AB connector
  • Expansion connectors:
    • Arduino™ Uno V3
    • PMOD
  • Flexible power-supply options:
    • ST LINK USB VBUS or external sources
  • On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
  • Comprehensive free software HAL library including a variety of examples, as part of the STM32Cube MCU Package
  • Support of a wide choice of Integrated Development Environments (IDEs) including IAR , Keil® , GCC-based IDEs, Arm® Mbed Enabled
  • Arm® Mbed online (see http://mbed.org)

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
32L496GDISCOVERY Discovery kit with STM32L496AG MCU Quick view

Key Features

  • STM32L496AGI6 microcontroller featuring 1 Mbyte of Flash memory and 320 Kbytes of RAM in an UFBGA169 package
  • 1.54 inch 240 x 240 pixel-TFT color LCD with parallel interface
  • SAI Audio CODEC, with a stereo headset jack, including analog microphone input
  • Stereo digital MEMS microphones
  • microSD™ card connector (card included)
  • Camera 8 bit-connector
  • STMod+ and PMOD connectors
  • 8 Mbit-PSRAM
  • IDD measurement
  • 64 Mbit-Quad-SPI Flash
  • 8 LEDs
  • Reset push button
  • 4 direction-joystick with selection
  • USB OTG FS with Micro-AB connector
  • Compatible Arduino™ Uno V3 connectors
  • On-board ST-LINK/V2-1 debugger
  • USB ST-LINK functions: Virtual COM port, mass storage, debug port
  • 5 source options for power supply
    • ST-LINK/V2-1 USB connector
    • User USB FS connector
    • VIN from Arduino™ connector
    • 5 V from Arduino™ connector
    • USB charger
  • 2 possible supply voltages for the MCU: 1.8 V and 3.3 V
  • Comprehensive free software including a variety of examples, part of the STM32Cube package

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
Part Number
32L4R9IDISCOVERY

Discovery kit with STM32L4R9AI MCU

Key Features

  • STM32L4R9AII6 microcontroller with 2-Mbyte Flash memory and 640-Kbyte RAM in UFBGA169 package
  • 1.2” 390x390 pixel AMOLED round display panel with 16-million colors depth, MIPI® DSI interface, and capacitive touch panel
  • USB OTG FS
  • On-board current measurement
  • SAI audio codec
  • ST-MEMS digital microphones
  • 16-Mbit asynchronous PSRAM
  • 512-Mbit Octo-SPI Flash
  • 2 user LEDs
  • 1 reset push-button
  • 4-direction joystick with selection button
  • Board connectors:
    • 8-bit camera
    • USB OTG FS with Micro-AB
    • Stereo headset jack including analog microphone input
    • microSD™ card
  • Board expansion connectors:
    • Arduino™ Uno V3
    • STMod+
    • PMOD
    • EXT_I2C
  • Flexible power-supply options:
    • ST-LINK USB VBUS or external sources
  • On-board ST-LINK/V2-1 debugger/programmer with USBre-enumeration capability: mass storage, virtual COM port and debug port
  • Comprehensive free software libraries and examples available with the STM32Cube package
  • Support of a wide choice of integrated development environments (IDEs), including IAR™, Keil® and GCC-based IDEs

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
B-L475E-IOT01A

STM32L4 Discovery kit IoT node, low-power wireless, BLE, NFC, SubGHz, Wi-Fi

Key Features

  • Ultra-low-power STM32L4 Series MCUs based on Arm® Cortex® -M4 core with 1 Mbyte of Flash memory and 128 Kbytes of SRAM, in LQFP100 package
  • 64-Mbit Quad-SPI (Macronix) Flash memory
  • Bluetooth® V4.1 module (SPBTLE-RF)
  • Sub-GHz (868 MHz or 915 MHz) low-power-programmable RF module (SPSGRF-868 or SPSGRF-915)
  • 802.11 b/g/n compliant Wi-Fi® module from Inventek Systems (ISM43362-M3G-L44)
  • Dynamic NFC tag based on M24SR with its printed NFC antenna
  • 2 digital omnidirectional microphones (MP34DT01)
  • Capacitive digital sensor for relative humidity and temperature (HTS221)
  • High-performance 3-axis magnetometer (LIS3MDL)
  • 3D accelerometer and 3D gyroscope (LSM6DSL)
  • 260-1260 hPa absolute digital output barometer (LPS22HB)
  • Time-of-Flight and gesture-detection sensor (VL53L0X)
  • 2 push-buttons (user and reset)
  • USB OTG FS with Micro-AB connector
  • Expansion connectors:
    • Arduino™ Uno V3
    • PMOD
  • Flexible power-supply options:
    • ST LINK USB VBUS or external sources
  • On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
  • Comprehensive free software HAL library including a variety of examples, as part of the STM32Cube MCU Package
  • Support of a wide choice of Integrated Development Environments (IDEs) including IAR , Keil® , GCC-based IDEs, Arm® Mbed Enabled
  • Arm® Mbed online (see http://mbed.org)

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
32L496GDISCOVERY

Discovery kit with STM32L496AG MCU

Key Features

  • STM32L496AGI6 microcontroller featuring 1 Mbyte of Flash memory and 320 Kbytes of RAM in an UFBGA169 package
  • 1.54 inch 240 x 240 pixel-TFT color LCD with parallel interface
  • SAI Audio CODEC, with a stereo headset jack, including analog microphone input
  • Stereo digital MEMS microphones
  • microSD™ card connector (card included)
  • Camera 8 bit-connector
  • STMod+ and PMOD connectors
  • 8 Mbit-PSRAM
  • IDD measurement
  • 64 Mbit-Quad-SPI Flash
  • 8 LEDs
  • Reset push button
  • 4 direction-joystick with selection
  • USB OTG FS with Micro-AB connector
  • Compatible Arduino™ Uno V3 connectors
  • On-board ST-LINK/V2-1 debugger
  • USB ST-LINK functions: Virtual COM port, mass storage, debug port
  • 5 source options for power supply
    • ST-LINK/V2-1 USB connector
    • User USB FS connector
    • VIN from Arduino™ connector
    • 5 V from Arduino™ connector
    • USB charger
  • 2 possible supply voltages for the MCU: 1.8 V and 3.3 V
  • Comprehensive free software including a variety of examples, part of the STM32Cube package

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
00 Files selected for download

Technical Documentation

    • Description Version Size Action
      AN4910
      Data exchange between wired (I²C) and wireless (RF ISO 15693) using fast transfer mode supported by ST25DV-I2C
      2.0
      598.03 KB
      PDF
      AN2972
      How to design an antenna for dynamic NFC tags
      9.0
      1.59 MB
      PDF
      AN4910

      Data exchange between wired (I²C) and wireless (RF ISO 15693) using fast transfer mode supported by ST25DV-I2C

      AN2972

      How to design an antenna for dynamic NFC tags

Presentations & Training Material

    • Description Version Size Action
      ST25DV-I2C product presentation 2.2
      2.1 MB
      PDF
      STM32 Development Boards Portfolio 1.2
      2.98 MB
      PDF

      ST25DV-I2C product presentation

      STM32 Development Boards Portfolio

Publications and Collaterals

    • Description Version Size Action
      L6984, L6986 Energy saving synchronous DC-DC converters for industrial
      1.24 MB
      PDF
      ST25DV-I2C series - Dynamic NFC/RFID tags 1.0
      1.47 MB
      PDF

      L6984, L6986 Energy saving synchronous DC-DC converters for industrial

      ST25DV-I2C series - Dynamic NFC/RFID tags

    • Description Version Size Action
      Linear and Switching Voltage Regulators Selection Guide 3.0
      370.88 KB
      PDF

      Linear and Switching Voltage Regulators Selection Guide

    • Description Version Size Action
      NFC solutions from ST 1.0
      3.53 MB
      PDF
      STM32L series - Ultra-low-power 32-bit MCUs 18.11
      3.86 MB
      PDF
      Semiconductor solutions for healthcare applications 1.0
      665.18 KB
      PDF

      NFC solutions from ST

      STM32L series - Ultra-low-power 32-bit MCUs

      Semiconductor solutions for healthcare applications

Embedded Software

    • Part Number

      PC software tool to manage, configure and evaluate the performances of Teseo GNSS family

MEMS and Sensors

Part number Description
STTS751 2.25 V low-voltage local digital temperature sensor
Part number
2.25 V low-voltage local digital temperature sensor

Microcontrollers & Microprocessors

Part number Description
STM32L496AG Ultra-low-power with FPU ARM Cortex-M4 MCU 80 MHz with 1 Mbyte Flash, USB OTG, LCD, DFSDM
Part number
Ultra-low-power with FPU ARM Cortex-M4 MCU 80 MHz with 1 Mbyte Flash, USB OTG, LCD, DFSDM

Protection Devices

Part number Description
TCPP01-M12 USB type-C port protection
Part number
USB type-C port protection