-
X-CUBE-CELLULAR consists of a set of libraries and application examples for STM32L4 Series MCUs acting as hosts for cellular connectivity applications.
X-CUBE-CELLULAR runs on the STM32L496AGI6-based low-power Discovery board, driving an STMod+ compatible cellular-modem add-on board.
The P-L496G-CELL01 2G/3G cellular-to-cloud add-on board features the UG96 modem from Quectel (2G/3G). The P-L496G-CELL02 LTE cellular-to-cloud add-on board features the BG96 modem from Quectel (LTE Cat M1/NB/2G fallback). Both modem add-on boards embed an EEPROM for saving the modem system configuration, a SIM socket, and a soldered embedded SIM in the MFF2 format, provisioned with the EMnify MVNO profile.
X-CUBE-CELLULAR runs on the STM32L475VGT6-based IoT node Discovery board, driving a cellular-modem add-on board (based on the BG96 Quectel or GM01Q Sequans® module) through an ARDUINO® / STMod+ adapter.
The X-CUBE-CELLULAR Expansion Package enables users to connect to the Internet through the cellular network by using the provided baseline, and to accelerate their end-product design cycle.Key Features
- STMicroelectronics framework for devices based on LPWAN cellular networks
- Compatible with the P-L496G-CELL01 and P-L496G-CELL02 cellular-to-cloud packs with optional X-NUCLEO-IKS01A2 motion-MEMS- and environment-sensor board
- Compatible with the B-L475E-IOT01A IoT Discovery board with X-NUCLEO-STMODA1 (ARDUINO® / STMod+ adapter) and MB1329 (STMicroelectronics modem board with the BG96 Quectel module)
- Compatible with the B-L475E-IOT01A IoT Discovery board with X-NUCLEO-STMODA1 (ARDUINO® / STMod+ adapter) and GM01Q-STMOD (Sequans® modem board with the GM01Q Sequans® module, referenced as B-CELL-GM01Q in STMicroelectronics)
- Compatible with the 32L496GDISCOVERY Discovery board or Discovery host board contained in P-L496G-CELL01 or P-L496G-CELL02, and GM01Q-STMOD modem board
- FreeRTOS™ pre-integration for easy integration in a complete platform
- Easy portability across different STM32 microcontroller series thanks to the use of STM32Cube and STM32CubeMX
- BSD-like socket APIs for data plane
- TCP-UDP/IP connectivity with IP stack on host or modem
- Flexible and modular SW architecture for the easy integration of other modems
- Partial GSMA TS34/35 compliance
- PC terminal boot menu for device FW customization: API key, APN, band
- Connected-application examples
Get Software
| Part Number | General Description | Software Version | Supplier | GitHub link | Download |
|---|---|---|---|---|---|
| X-CUBE-CELLULAR | Cellular software expansion for STM32Cube | 5.0.0 | ST | - | x License AgreementACCEPTPlease indicate your acceptance or NON-acceptance by selecting “I ACCEPT” or “I DO NOT ACCEPT” as indicated below in the media. BY INSTALLING COPYING, DOWNLOADING, ACCESSING OR OTHERWISE USING THIS SOFTWARE PACKAGE OR ANY PART THEREOF (AND THE RELATED DOCUMENTATION) FROM STMICROELECTRONICS INTERNATIONAL N.V, SWISS BRANCH AND/OR ITS AFFILIATED COMPANIES (STMICROELECTRONICS), THE RECIPIENT, ON BEHALF OF HIMSELF OR HERSELF, OR ON BEHALF OF ANY ENTITY BY WHICH SUCH RECIPIENT IS EMPLOYED AND/OR ENGAGED AGREES TO BE BOUND BY THIS SOFTWARE PACKAGE LICENSE AGREEMENT. Under STMicroelectronics’ intellectual property rights and subject to applicable licensing terms for any third-party software incorporated in this software package and applicable Open Source Terms (as defined here below), the redistribution, reproduction and use in source and binary forms of the software package or any part thereof, with or without modification, are permitted provided that the following conditions are met:
THIS SOFTWARE PACKAGE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE PACKAGE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. EXCEPT AS EXPRESSLY PERMITTED HEREUNDER AND SUBJECT TO THE APPLICABLE LICENSING TERMS FOR ANY THIRD-PARTY SOFTWARE INCORPORATED IN THE SOFTWARE PACKAGE AND OPEN SOURCE TERMS AS APPLICABLE, NO LICENSE OR OTHER RIGHTS, WHETHER EXPRESS OR IMPLIED, ARE GRANTED UNDER ANY PATENT OR OTHER INTELLECTUAL PROPERTY RIGHTS OF STMICROELECTRONICS OR ANY THIRD PARTY. |
Save as PDF Featured Videos
MadeForSTM32™ is a new quality label delivered by ST, which is granted after an evaluation process. It helps engineers identify third party solutions with the highest level of integration and quality for the STM32 microcontrollers' ecosystem. MadeForSTM32™ is offered to members of the ST Partner Program who want to go one step further in our collaboration, with the overall objective of contributing to a high-quality STM32 ecosystem.
The STM32Cube.AI is an extension pack of the widely used STM32CubeMX configuration and code generation tool enabling AI on STM32 Arm® Cortex®-M-based microcontrollers.
The X-CUBE-VS4A Expansion Package consists of a set of libraries and application examples for STM32F7 Series microcontrollers acting as Alexa-enabled devices. It runs on the 32F769IDISCOVERY board, which provides a native Ethernet interface.
Embedded Software
-
-
Picture Part number Manufacturer Description 
X-CUBE-MEMSMIC1 ST Digital MEMS microphones acquisition and processing software expansion for STM32Cube Part NumberDigital MEMS microphones acquisition and processing software expansion for STM32Cube
-
Evaluation Tools
-
-
Picture Part number Manufacturer Description 
B-CELL-GM01Q Sequans Communications GM01Q STMoD+ - Cellular Expansion Board Part NumberGM01Q STMoD+ - Cellular Expansion Board
-
