-
The VIPER06 is an offline converter with an 800 V avalanche rugged power section, a PWM controller, a user-defined overcurrent limit, open-loop failure protection, hysteretic thermal protection, soft startup and safe auto-restart after any fault condition. The device is able to power itself directly from the rectified mains, eliminating the need for an auxiliary bias winding. Advanced frequency jittering reduces EMI filter cost. Burst mode operation and the device’s very low power consumption both help to meet the standards set by energy-saving regulations.
主な特徴
- 800 V avalanche rugged power section
- PWM operation with frequency jittering for low EMI
- Operating frequency:
- 30 kHz for VIPER06Xx
- 60 kHz for VIPER06Lx
- 115 kHz for VIPER06Hx
- No need for an auxiliary winding in low-power applications
- Standby power < 30 mW at 265 VAC
- Limiting current with adjustable set point
- On-board soft-start
- Safe auto-restart after a fault condition
- Hysteretic thermal shutdown
サンプル & 購入
| 製品型番 | パッケージ | 梱包タイプ | 製品ステータス | 概算価格（USS） | 数量 | RDS(on) (Ω) (max) | Transistor Breakdown Voltage (V) (min) | Drain Current (A) (nom) | ECCN (US) | Country of Origin | 詳細 | 販売代理店からオーダー | STからオーダー |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VIPER06HS | SSOP 10 | Tube | アクティブ | 0.3343 | 1000 | 32 | 800 | 0.35 | EAR99 | CHINA | 在庫チェック | 購入 | |
| VIPER06XSTR | SSOP 10 | Tape And Reel | アクティブ | 0.3343 | 1000 | 32 | 800 | 0.35 | EAR99 | CHINA | 在庫チェック | サンプル入手 | |
| VIPER06LS | SSOP 10 | Tube | アクティブ | 0.3343 | 1000 | 32 | 800 | 0.35 | EAR99 | CHINA | 在庫チェック | 購入 | |
| VIPER06HN | PDIP 7 | Tube | アクティブ | 0.3343 | 1000 | 32 | 800 | 0.35 | EAR99 | MALAYSIA | 在庫チェック | サンプル入手 | |
| VIPER06XN | PDIP 7 | Tube | アクティブ | 0.3343 | 1000 | 32 | 800 | 0.35 | EAR99 | MALAYSIA | 在庫チェック | サンプル入手 | |
| VIPER06XS | SSOP 10 | Tube | アクティブ | 0.3343 | 1000 | 32 | 800 | 0.35 | EAR99 | CHINA | 在庫チェック | 購入 | |
| VIPER06HSTR | SSOP 10 | Tape And Reel | アクティブ | 0.3343 | 1000 | 32 | 800 | 0.35 | EAR99 | CHINA | 在庫チェック | サンプル入手 | |
| VIPER06LSTR | SSOP 10 | Tape And Reel | アクティブ | 0.3343 | 1000 | 32 | 800 | 0.35 | EAR99 | CHINA | 在庫チェック | サンプル入手 | |
| VIPER06LN | PDIP 7 | Tube | アクティブ | 0.3343 | 1000 | 32 | 800 | 0.35 | EAR99 | MALAYSIA | 在庫チェック | サンプル入手 |
(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors
ビデオ
評価ツール
-
-
写真 品名 製造元 概要 
EVSPIN32F0601S1 -- EVSPIN32F0601S1 3-phase inverter based on STSPIN32F0601 
EVSPIN32F0601S3 -- EVSPIN32F0601S3 3-phase inverter based on STSPIN32F0601 with 3-shunt topology 
EVSPIN32F0602S1 -- EVSPIN32F0602S1 3-phase inverter based on STSPIN32F0602 
STEVAL-ISA096V1 -- Auxiliary power supply in buck-boost topology based on the Viper06 
STEVAL-ISA112V1 -- Wide range non-isolated flyback demonstration board, single-output 12 V/4 W based on the VIPER06HN 
STEVAL-ISA113V1 -- Wide range single-output demonstration board based on the VIPER06HS 
STEVAL-ISA114V1 ST 5 V/0.8 W wide-range 30 kHz buck converter based on the VIPer06XS 
STEVAL-ISA115V1 ST 12 V, 150 mA non-isolated buck converter using VIPer™ Plus - VIPER06XS 
STEVAL-ISA130V1 -- 12 V 140 mA 30 kHz non-isolated buck topology regulator based on VIPer06XN 
STEVAL-ISA134V1 -- 12 V - 4 W, 115 kHz isolated flyback based on the VIPer06 
STEVAL-ISA135V1 -- 4 W, 12 V output, isolated flyback converter using VIPer™ Plus - VIPER06HS 
STEVAL-ISA136V1 -- 3W, 5V output, isolated flyback converter using VIPer™ Plus - VIPER06HN 製品型番EVSPIN32F0601S1 3-phase inverter based on STSPIN32F0601
EVSPIN32F0601S3 3-phase inverter based on STSPIN32F0601 with 3-shunt topology
EVSPIN32F0602S1 3-phase inverter based on STSPIN32F0602
Auxiliary power supply in buck-boost topology based on the Viper06
Wide range non-isolated flyback demonstration board, single-output 12 V/4 W based on the VIPER06HN
Wide range single-output demonstration board based on the VIPER06HS
5 V/0.8 W wide-range 30 kHz buck converter based on the VIPer06XS
12 V, 150 mA non-isolated buck converter using VIPer™ Plus - VIPER06XS
12 V 140 mA 30 kHz non-isolated buck topology regulator based on VIPer06XN
12 V - 4 W, 115 kHz isolated flyback based on the VIPer06
4 W, 12 V output, isolated flyback converter using VIPer™ Plus - VIPER06HS
3W, 5V output, isolated flyback converter using VIPer™ Plus - VIPER06HN
-
| 製品型番 | 製品ステータス | パッケージ | グレード | RoHSコンプライアンスグレード | Material Declaration** |
|---|---|---|---|---|---|
| VIPER06HN | アクティブ | PDIP 7 | インダストリアル | Ecopack2 | |
| VIPER06HS | アクティブ | SSOP 10 | インダストリアル | Ecopack2 | |
| VIPER06HSTR | アクティブ | SSOP 10 | インダストリアル | Ecopack2 | |
| VIPER06LN | アクティブ | PDIP 7 | インダストリアル | Ecopack2 | |
| VIPER06LS | アクティブ | SSOP 10 | インダストリアル | Ecopack2 | |
| VIPER06LSTR | アクティブ | SSOP 10 | インダストリアル | Ecopack2 | |
| VIPER06XN | アクティブ | PDIP 7 | インダストリアル | Ecopack2 | |
| VIPER06XS | アクティブ | SSOP 10 | インダストリアル | Ecopack2 | |
| VIPER06XSTR | アクティブ | SSOP 10 | インダストリアル | Ecopack2 |
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
