The STM32F779I-EVAL evaluation board is a complete demonstration and development platform for STMicroelectronics ARM®Cortex®-M7 core-based STM32F779NI microcontrollers. It features the following interfaces: four I2Cs, six SPIs with three multiplexed full-duplex I2S, SDIO, two SAIs, 8- to 14-bit digital camera module, Ethernet MAC, FMC and Quad-SPI. It also features four USART and four UART peripherals, two CAN bus, three 12-bit ADC converters, two 12-bit DAC channels, internal 256+4-Kbyte SRAM and 2-Mbyte Flash memory, USB HS OTG and USB FS OTG peripherals, JTAG debugging support. This evaluation board can be used as a reference design for user application development but it is not considered as a final application.
The full range of hardware features on the board helps the user to evaluate all the peripherals (USB OTG HS, USB OTG FS, Ethernet, motor control, CAN, microSD card, USART, audio DAC and ADC, digital microphone, CAN, SRAM, NOR Flash, SDRAM, Quad SPI Flash, 4" DSI LCD with capacitive touch panel, etc.) and to develop applications. Extension headers make it possible to easily connect a daughterboard for a specific application.
The integrated ST-LINK/V2-1 provides an embedded in-circuit debugger and programmer for the STM32.
Key FeaturesSTM32F779NI microcontroller with 2-Mbyte Flash memory and 512+16+4-Kbyte RAM in BGA216 package
Six 5 V power supply options:
- Power jack
- ST-LINK/V2-1 USB Micro-B connector
- User USB HS connector
- User USB FS1 connector
- User USB FS2 connector
SAI audio DAC, stereo audio jack that supports headset with microphone
Stereo digital microphone, audio jack connector used to connect external speakers
2-Gbyte (or more) SDIO interface microSD card
Four I2C interfaces
JTAG/SWD and ETM trace debug support, ST-LINK/V2-1 embedded
IEEE-802.3-2002 compliant Ethernet connector
8Mx32bit SDRAM, 1Mx16bit SRAM and 8Mx16bit NOR Flash
512-Mbit Quad-SPI NOR Flash2Gx16bit NAND Flash interface to connect NAND Flash module
4" DSI interface LCD with capacitive touch panel
Joystick with 4-direction control and selector
Reset, Wake Up/Tamper or key button
4-color user LEDs
Extension and memory connectors for daughterboard or wrapping board
USB OTG HS and FS with Micro-AB connectors
RTC with backup battery
CAN2.0A/B compliant connection
Motor control connector
|Part Number||Marketing Status||RoHS Compliance Grade||WEEE Compliant||Material Declaration**|
RoHS Compliance Grade
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.