Overview
Solutions
HW Evaluation Tools
Resources
Tools and Software
Key Products
Get Started

Headsets come in a wide variety of form factors and functionality. The primary function of a headset is to deliver high quality stereo music and sound, but the most advanced headsets incorporate a number of other functions including  microphones for voice capture and noise cancellation, sound processing, on-headset controls for audio playback and call handling, wireless connectivity and wireless charging.  Tiny form factor in-ear devices can achieve unprecedented voice quality thanks to bone vibration sensing combined with high quality voice capture with MEMS microphones and optimized signal processing.

ST provides range of products that can enhance headset design. Key products include low-power analog and multi-mode digital MEMS microphones with high dynamic range, sensors for motion and vibration capture, low-power microcontrollers for control and sound processing, ultra-low power Bluetooth low energy connectivity and audio amplifiers. We also offer wireless battery charging system solutions that simplify design with a tiny footprint and efficient power transfer combined with safety and reliability.

Part Number
Description
M24SR-DISCOVERY Discovery kit for the M24SR series - Dynamic NFC/RFID tag Quick view

Key Features

  • Ready-to-use printed circuit board (PCB) including:
    • M24SR64-Y Dynamic NFC/RFID tag
    • 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
    • STM32F103RGT6 64LQFP 32-bit microcontroller, with 1Mbytes of Flash memory
    • LCD Color Screen (320*200 pixels)
    • Different color LEDs
    • USB microB connector for board powering
    • JTAG connector for microcontroller firmware upgrade and debug
    • Joystick for menu selection
  • M24SR-DISCO-PREM specific features:
    • Bluetooth module with audio outputs connected to Jack 3.5
    • Headset

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC01A1 Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo Quick view

Key Features

  • M24SR64-Y Dynamic NFC/RFID tag IC
  • NFC antenna: 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Powered through the Arduino UNO R3 connectors
  • 3 color LEDs for general purpose

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-IDB05A1 Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo Quick view

Key Features

  • STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo
  • X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF)
  • SPBTLE-RF:
    • Bluetooth Low Energy FCC and IC certified module based on Bluetooth® SMART 4.1 network processor BlueNRG-MS
    • Integrated Balun (BALF-NRG-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-STLKT01V1 SensorTile development kit Quick view

Key Features

  • Included in the development kit package:
    • SensorTile module (STEVAL-STLCS01V1) with STM32L476JG, LSM6DSM, LSM303AGR, LPS22HB, MP34DT05-A, BlueNRG-MS, BALF-NRG-02D3 and LD39115J18R
    • SensorTile expansion Cradle board equipped with audio DAC, USB port, STM32 Nucleo, Arduino UNO R3 and SWD connector
    • SensorTile Cradle with battery charger, humidity and temperature sensor, SD memory card slot, USB port and breakaway SWD connector
    • 100 mAh Li-Ion battery
    • Plastic box
    • SWD programming cable
  • Software libraries and tools
    • STSW-STLKT01: SensorTile firmware package that supports sensors raw data streaming via USB, data logging on SDCard, audio acquisition and audio streaming.
    • FP-SNS-ALLMEMS1 and FP-SNS-MOTENV1: STM32Cube function packs
    • STBLESensor: iOS and Android demo Apps
    • BlueST-SDK: iOS and Android Software Development Kit
  • CE certified
  • RoHS and China RoHS compliant
  • WEEE compliant
  • FCC (ID: S9NSTILE01) certified
  • IC (IC: 8976C-STILE01) certified with PMN: STEVAL-STLKT01V1; HVIN: STEVAL-STLCS01V1; HMN: STEVAL-STLCX01V1; FVIN: bluenrg_7_1_e_Mode_2-32MHz-XO32K_4M.img
  • TYPE certified (006-000482)

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC04A1 Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo Quick view

Key Features

  • Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo
  • Up to 4-Kbit memory with NDEF support
  • 54 mm diameter, single layer circular antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino™ UNO R3 connector
  • Self-powered or powered through the Arduino™ UNO R3 connectors
  • Three general purpose LEDs
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware
  • FCC and IC verified
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25DV-DISCOVERY Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability Quick view

Key Features

  • Two ready-to-use printed circuit boards (PCB):
    • ST25DV_Discovery_Mboard:
    • STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM.
    • LCD color screen (320 x 200 pixels)
    • Touch screen driver
    • Different color LEDs (power, user, ST link)
    • User push button
    • Joystick for menu selection
    • Reset button
    • On board ST link for microcontroller firmware upgrade and debug
    • ST link mini USB
    • User micro USB
    • USB micro or mini connector for board powering
    • Demonstration use cases stored in memory
    • Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi® module and JTAG 20 pin connector
  • ST25DV_Discovery_ANT_C5:
    • 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB
    • ST25DV04K Dynamic NFC / RFID tag
    • I2 C interface connector
    • Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit
    • GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-LDO001V1 Quad high performance LDO evaluation board based on LDBL20, LDLN025, LD39130S and STLQ020 Quick view

Key Features

  • Multi LDO evaluation board based on four high performance low dropout linear voltage regulators in miniature packages
  • Key features:
    • Low operating input voltage (from 1.4 V to 5.5 V)
    • Current capability from 200 mA to 300 mA
    • Low dropout (down to 160 mV typ.)
    • Ultra-low quiescent current (down to 500 nA typ.)
    • Low noise (down to 6.5 μVRMS typ.)
    • High PSSR (up to 80 dB)
    • Logic controlled electronic shutdown (enable)
    • Tiny packages (DFN-6L, Flip-chip, ST STAMP™)
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-BCNKT01V1 BlueCoin Starter kit Quick view

Key Features

  • Contains FCC ID: S9NBCOIN01
  • Contains module IC 8976C-BCOIN01 certified with PMN: STEVAL-BCNKT01V1; HVIN: STEVAL-BCNCS01V1; HMN: STEVAL-BCNCR01V1; FVIN: bluenrg_7_2_c_Mode_2-32MHz-XO32K_4M.img
  • The development kit package includes:
    • BlueCoin module (STEVAL-BCNCS01V1) with STM32F446, LSM6DSM, LSM303AGR, LPS22HB, 4x MP34DT06J, BlueNRG-MS, BALF-NRG-01D3, STBC03JR
    • CoinStation (STEVAL-BCNST01V1) board
    • BlueCoin Cradle (STEVAL-BCNCR01V1)
    • 130 mAh Li-Po battery
    • Plastic box for housing the BlueCoin cradle and the battery
    • SWD programming cable
  • Software libraries and tools:
    • STSW-BCNKT01 firmware package with raw sensor data streaming support via USB, data logging on SDCard, audio acquisition and audio streaming, time-of-flight example and BLE protocol to interface to a Smartphone App
    • FP-AUD-SMARTMIC1: smart audio IN-OUT software expansion for STM32Cube
    • FP-SNS-ALLMEMS1: STM32 ODE function pack for BLE and sensors
    • FP-AUD-BVLINK1: BLE and microphones software expansion for STM32Cube
    • STBLESensor: iOS™ and Android™ demo apps
    • BlueST-SDK: iOS and Android software development kit
    • Compatible with STM32 ecosystem through STM32Cube support

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IDB007V1M Evaluation platform based on the SPBTLE-1S module Quick view

Key Features

  • Bluetooth® SMART board with the SPBTLE-1S certified module based on the BlueNRG-1 Bluetooth low energy system-on-chip
  • Associated BlueNRG-1 development kit SW package including firmware and documentation
  • Up to +5 dBm available output power
  • Bluetooth® low energy v4.2 compliant, supports master, slave and simultaneous master-and-slave roles
  • Integrated balun which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • Battery holder
  • JTAG debug connector
  • USB to serial bridge for providing I/O channel with the BlueNRG-1 device
  • Jumper for measuring current for BlueNRG-1 only
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-BLUEMIC-1 Ultra-low power Bluetooth® low energy microphone based on SPBTLE-1S certified module Quick view

Key Features

  • Bluetooth® SMART small form factor board based on the SPBTLE-1S module, Bluetooth v4.2 compliant
  • On-board SPBTLE-1S module, based on BlueNRG-1, Bluetooth low energy application processor system on chip embedding:
    • an ultra-low power ARM® Cortex® -M0 32-bit core architecture
    • programmable embedded 160 KB Flash
    • 24 KB embedded RAM with data retention
  • On-board MP34DT05-A (or MP34DT04-C1 in the first generation board) digital MEMS microphone
  • On-board LSM6DSL: MEMS 3D accelerometer (±2 / ±4 / ±8 / ±16 g) plus 3D gyroscope (±125 / ±245 / ±500 / ±1000 / ±2000 dps)
  • Voltage supply: 1V8 or 3V3
  • Battery or USB powered
  • 100 mAh Li-Ion battery
  • On-board STBC08 linear Li-Ion battery charger
  • SWD connector
  • Included in the development kit package:
    • STEVAL-BLUEMIC-1
    • Plastic box for housing STEVAL-BLUEMIC-1
    • 100 mAh Li-Ion battery
    • SWD programming cable
  • SW development kit for audio and inertial MEMS data streaming over BLE
  • ST BlueMS: Android and iOS demo App available in the respective stores
  • CE certified
  • RoHS and China RoHS compliant
  • Contains Transmitter Module FCC (ID: S9NSPBTLE1S) certified
  • Contains Transmitter Module IC (IC: 8976C-SPBTLE1S) certified

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISB042V1 Dual mode wireless power evaluation board for Qi and Airfuel inductive receiver and Qi-based transmitter with STWLC33 Quick view

Key Features

  • STWLC33 evaluation board with Würth Elektronik dual mode coil (760308102207)
  • Qi 1.2 compliant, supporting extended power profile: up to 15 W/10 V maximum output power
  • Backward compatible with Qi baseline power profile: up to 5 W/5 V maximum output power
  • PMA-SR1 (AirFuel inductive) compliant: 5 W/5.6 V maximum output power
  • Transmitter function based on Qi protocol to charge wearable devices using the same Rx coil (up to 3 W power)
  • Total system efficiency up to 80%
  • Configurable GPIOs for status indication
  • I²C interface for communication with the host system
  • Foreign object detection (FOD)
  • Complete kit (IC, firmware)
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IDB008V2 Evaluation platform based on the BlueNRG-2 Quick view

Key Features

  • Bluetooth® SMART board based on the BlueNRG-2 Bluetooth low energy system on chip
  • Associated BlueNRG-2 development kit SW package including firmware and documentation
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent receiver sensitivity (-88 dBm)
  • Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
  • Bluetooth® SMART v5.0 compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature
  • New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISB044V1 Qi MP-A10 15 W wireless charger TX evaluation kit based on STWBC-EP Quick view

Key Features

  • STWBC-EP digital controller
  • 15 W output power
  • Qi MP-A10 reference design
  • WPC Qi1.2.3 standard compliant
  • Robust demodulation algorithm, with triple path (V, I, f)
  • Foreign object detection (FOD)
  • Accurate power control
  • Active presence detection
  • UART protocol to control and monitor the system
  • Complete reference design (evaluation board, IC, firmware and tools)
  • 2-layer PCB for easy design
  • Flash memory-based
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
Part Number
M24SR-DISCOVERY

Discovery kit for the M24SR series - Dynamic NFC/RFID tag

Key Features

  • Ready-to-use printed circuit board (PCB) including:
    • M24SR64-Y Dynamic NFC/RFID tag
    • 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
    • STM32F103RGT6 64LQFP 32-bit microcontroller, with 1Mbytes of Flash memory
    • LCD Color Screen (320*200 pixels)
    • Different color LEDs
    • USB microB connector for board powering
    • JTAG connector for microcontroller firmware upgrade and debug
    • Joystick for menu selection
  • M24SR-DISCO-PREM specific features:
    • Bluetooth module with audio outputs connected to Jack 3.5
    • Headset

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC01A1

Dynamic NFC tag expansion board based on M24SR for STM32 Nucleo

Key Features

  • M24SR64-Y Dynamic NFC/RFID tag IC
  • NFC antenna: 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14)
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Powered through the Arduino UNO R3 connectors
  • 3 color LEDs for general purpose

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-IDB05A1

Bluetooth Low Energy expansion board based on SPBTLE-RF module for STM32 Nucleo

Key Features

  • STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo
  • X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF)
  • SPBTLE-RF:
    • Bluetooth Low Energy FCC and IC certified module based on Bluetooth® SMART 4.1 network processor BlueNRG-MS
    • Integrated Balun (BALF-NRG-01D3)
    • Chip antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino UNO R3 connector
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-STLKT01V1

SensorTile development kit

Key Features

  • Included in the development kit package:
    • SensorTile module (STEVAL-STLCS01V1) with STM32L476JG, LSM6DSM, LSM303AGR, LPS22HB, MP34DT05-A, BlueNRG-MS, BALF-NRG-02D3 and LD39115J18R
    • SensorTile expansion Cradle board equipped with audio DAC, USB port, STM32 Nucleo, Arduino UNO R3 and SWD connector
    • SensorTile Cradle with battery charger, humidity and temperature sensor, SD memory card slot, USB port and breakaway SWD connector
    • 100 mAh Li-Ion battery
    • Plastic box
    • SWD programming cable
  • Software libraries and tools
    • STSW-STLKT01: SensorTile firmware package that supports sensors raw data streaming via USB, data logging on SDCard, audio acquisition and audio streaming.
    • FP-SNS-ALLMEMS1 and FP-SNS-MOTENV1: STM32Cube function packs
    • STBLESensor: iOS and Android demo Apps
    • BlueST-SDK: iOS and Android Software Development Kit
  • CE certified
  • RoHS and China RoHS compliant
  • WEEE compliant
  • FCC (ID: S9NSTILE01) certified
  • IC (IC: 8976C-STILE01) certified with PMN: STEVAL-STLKT01V1; HVIN: STEVAL-STLCS01V1; HMN: STEVAL-STLCX01V1; FVIN: bluenrg_7_1_e_Mode_2-32MHz-XO32K_4M.img
  • TYPE certified (006-000482)

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-NFC04A1

Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo

Key Features

  • Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo
  • Up to 4-Kbit memory with NDEF support
  • 54 mm diameter, single layer circular antenna
  • Compatible with STM32 Nucleo boards
  • Equipped with Arduino™ UNO R3 connector
  • Self-powered or powered through the Arduino™ UNO R3 connectors
  • Three general purpose LEDs
  • Scalable solution, capable of cascading multiple boards for larger systems
  • Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware
  • FCC and IC verified
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
ST25DV-DISCOVERY

Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability

Key Features

  • Two ready-to-use printed circuit boards (PCB):
    • ST25DV_Discovery_Mboard:
    • STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM.
    • LCD color screen (320 x 200 pixels)
    • Touch screen driver
    • Different color LEDs (power, user, ST link)
    • User push button
    • Joystick for menu selection
    • Reset button
    • On board ST link for microcontroller firmware upgrade and debug
    • ST link mini USB
    • User micro USB
    • USB micro or mini connector for board powering
    • Demonstration use cases stored in memory
    • Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi® module and JTAG 20 pin connector
  • ST25DV_Discovery_ANT_C5:
    • 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB
    • ST25DV04K Dynamic NFC / RFID tag
    • I2 C interface connector
    • Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit
    • GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-LDO001V1

Quad high performance LDO evaluation board based on LDBL20, LDLN025, LD39130S and STLQ020

Key Features

  • Multi LDO evaluation board based on four high performance low dropout linear voltage regulators in miniature packages
  • Key features:
    • Low operating input voltage (from 1.4 V to 5.5 V)
    • Current capability from 200 mA to 300 mA
    • Low dropout (down to 160 mV typ.)
    • Ultra-low quiescent current (down to 500 nA typ.)
    • Low noise (down to 6.5 μVRMS typ.)
    • High PSSR (up to 80 dB)
    • Logic controlled electronic shutdown (enable)
    • Tiny packages (DFN-6L, Flip-chip, ST STAMP™)
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-BCNKT01V1

BlueCoin Starter kit

Key Features

  • Contains FCC ID: S9NBCOIN01
  • Contains module IC 8976C-BCOIN01 certified with PMN: STEVAL-BCNKT01V1; HVIN: STEVAL-BCNCS01V1; HMN: STEVAL-BCNCR01V1; FVIN: bluenrg_7_2_c_Mode_2-32MHz-XO32K_4M.img
  • The development kit package includes:
    • BlueCoin module (STEVAL-BCNCS01V1) with STM32F446, LSM6DSM, LSM303AGR, LPS22HB, 4x MP34DT06J, BlueNRG-MS, BALF-NRG-01D3, STBC03JR
    • CoinStation (STEVAL-BCNST01V1) board
    • BlueCoin Cradle (STEVAL-BCNCR01V1)
    • 130 mAh Li-Po battery
    • Plastic box for housing the BlueCoin cradle and the battery
    • SWD programming cable
  • Software libraries and tools:
    • STSW-BCNKT01 firmware package with raw sensor data streaming support via USB, data logging on SDCard, audio acquisition and audio streaming, time-of-flight example and BLE protocol to interface to a Smartphone App
    • FP-AUD-SMARTMIC1: smart audio IN-OUT software expansion for STM32Cube
    • FP-SNS-ALLMEMS1: STM32 ODE function pack for BLE and sensors
    • FP-AUD-BVLINK1: BLE and microphones software expansion for STM32Cube
    • STBLESensor: iOS™ and Android™ demo apps
    • BlueST-SDK: iOS and Android software development kit
    • Compatible with STM32 ecosystem through STM32Cube support

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IDB007V1M

Evaluation platform based on the SPBTLE-1S module

Key Features

  • Bluetooth® SMART board with the SPBTLE-1S certified module based on the BlueNRG-1 Bluetooth low energy system-on-chip
  • Associated BlueNRG-1 development kit SW package including firmware and documentation
  • Up to +5 dBm available output power
  • Bluetooth® low energy v4.2 compliant, supports master, slave and simultaneous master-and-slave roles
  • Integrated balun which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • Battery holder
  • JTAG debug connector
  • USB to serial bridge for providing I/O channel with the BlueNRG-1 device
  • Jumper for measuring current for BlueNRG-1 only
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-BLUEMIC-1

Ultra-low power Bluetooth® low energy microphone based on SPBTLE-1S certified module

Key Features

  • Bluetooth® SMART small form factor board based on the SPBTLE-1S module, Bluetooth v4.2 compliant
  • On-board SPBTLE-1S module, based on BlueNRG-1, Bluetooth low energy application processor system on chip embedding:
    • an ultra-low power ARM® Cortex® -M0 32-bit core architecture
    • programmable embedded 160 KB Flash
    • 24 KB embedded RAM with data retention
  • On-board MP34DT05-A (or MP34DT04-C1 in the first generation board) digital MEMS microphone
  • On-board LSM6DSL: MEMS 3D accelerometer (±2 / ±4 / ±8 / ±16 g) plus 3D gyroscope (±125 / ±245 / ±500 / ±1000 / ±2000 dps)
  • Voltage supply: 1V8 or 3V3
  • Battery or USB powered
  • 100 mAh Li-Ion battery
  • On-board STBC08 linear Li-Ion battery charger
  • SWD connector
  • Included in the development kit package:
    • STEVAL-BLUEMIC-1
    • Plastic box for housing STEVAL-BLUEMIC-1
    • 100 mAh Li-Ion battery
    • SWD programming cable
  • SW development kit for audio and inertial MEMS data streaming over BLE
  • ST BlueMS: Android and iOS demo App available in the respective stores
  • CE certified
  • RoHS and China RoHS compliant
  • Contains Transmitter Module FCC (ID: S9NSPBTLE1S) certified
  • Contains Transmitter Module IC (IC: 8976C-SPBTLE1S) certified

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISB042V1

Dual mode wireless power evaluation board for Qi and Airfuel inductive receiver and Qi-based transmitter with STWLC33

Key Features

  • STWLC33 evaluation board with Würth Elektronik dual mode coil (760308102207)
  • Qi 1.2 compliant, supporting extended power profile: up to 15 W/10 V maximum output power
  • Backward compatible with Qi baseline power profile: up to 5 W/5 V maximum output power
  • PMA-SR1 (AirFuel inductive) compliant: 5 W/5.6 V maximum output power
  • Transmitter function based on Qi protocol to charge wearable devices using the same Rx coil (up to 3 W power)
  • Total system efficiency up to 80%
  • Configurable GPIOs for status indication
  • I²C interface for communication with the host system
  • Foreign object detection (FOD)
  • Complete kit (IC, firmware)
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-IDB008V2

Evaluation platform based on the BlueNRG-2

Key Features

  • Bluetooth® SMART board based on the BlueNRG-2 Bluetooth low energy system on chip
  • Associated BlueNRG-2 development kit SW package including firmware and documentation
  • Up to +8 dBm available output power (at antenna connector)
  • Excellent receiver sensitivity (-88 dBm)
  • Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
  • Bluetooth® SMART v5.0 compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature
  • New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
  • SMA connector for antenna or measuring equipment
  • 3 user LEDs
  • 2 user buttons
  • 3D digital accelerometer and 3D digital gyroscope
  • MEMS pressure sensor with embedded temperature sensor
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISB044V1

Qi MP-A10 15 W wireless charger TX evaluation kit based on STWBC-EP

Key Features

  • STWBC-EP digital controller
  • 15 W output power
  • Qi MP-A10 reference design
  • WPC Qi1.2.3 standard compliant
  • Robust demodulation algorithm, with triple path (V, I, f)
  • Foreign object detection (FOD)
  • Accurate power control
  • Active presence detection
  • UART protocol to control and monitor the system
  • Complete reference design (evaluation board, IC, firmware and tools)
  • 2-layer PCB for easy design
  • Flash memory-based
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
00 Files selected for download

Technical Documentation

    • Description Version Size Action
      AN5085
      Cycling endurance and data retention of EEPROMs in ST25DVxxx products based on CMOS F8H process
      2.0
      306.83 KB
      PDF
      AN4910
      Data exchange between wired (I²C) and wireless (RF ISO 15693) using fast transfer mode supported by ST25DVxxx
      1.0
      585.2 KB
      PDF
      AN4913
      Energy harvesting delivery impact on ST25DVxxx behavior during RF communication
      1.0
      1.05 MB
      PDF
      AN2866
      How to design a 13.56 MHz customized antenna for ST25 NFC / RFID Tags
      3.0
      615.85 KB
      PDF
      AN2972
      How to design an antenna for dynamic NFC tags
      9.0
      1.59 MB
      PDF
      AN4911
      NDEF management with ST25DVxxx and ST25TVxxx products
      4.0
      460.67 KB
      PDF
      AN4642
      Overview of the BLE Profiles application for X-CUBE-BLE1, expansion for STM32Cube
      3.0
      2.31 MB
      PDF
      AN4433
      Storing data into the NDEF memory of M24SR
      2.0
      507.23 KB
      PDF
      AN5085

      Cycling endurance and data retention of EEPROMs in ST25DVxxx products based on CMOS F8H process

      AN4910

      Data exchange between wired (I²C) and wireless (RF ISO 15693) using fast transfer mode supported by ST25DVxxx

      AN4913

      Energy harvesting delivery impact on ST25DVxxx behavior during RF communication

      AN2866

      How to design a 13.56 MHz customized antenna for ST25 NFC / RFID Tags

      AN2972

      How to design an antenna for dynamic NFC tags

      AN4911

      NDEF management with ST25DVxxx and ST25TVxxx products

      AN4642

      Overview of the BLE Profiles application for X-CUBE-BLE1, expansion for STM32Cube

      AN4433

      Storing data into the NDEF memory of M24SR

    • Description Version Size Action
      UM2196
      Getting started with the FP-AUD-BVLINK1 STM32 ODE function pack based on half-duplex voice streaming over BLE
      1.0
      4.12 MB
      PDF
      UM2240
      Getting started with the STEVAL-BCNKT01V1 BlueCoin kit: augmented acoustics and motion sensing development platform
      2.0
      866.22 KB
      PDF
      UM2257
      Getting started with the STEVAL-BLUEMIC-1 evaluation board, ultra-low power wireless microphone based on SPBTLE-1S module
      2.0
      7.19 MB
      PDF
      UM2101
      Getting started with the STEVAL-STLKT01V1 SensorTile integrated development platform
      5.0
      1.36 MB
      PDF
      UM2196

      Getting started with the FP-AUD-BVLINK1 STM32 ODE function pack based on half-duplex voice streaming over BLE

      UM2240

      Getting started with the STEVAL-BCNKT01V1 BlueCoin kit: augmented acoustics and motion sensing development platform

      UM2257

      Getting started with the STEVAL-BLUEMIC-1 evaluation board, ultra-low power wireless microphone based on SPBTLE-1S module

      UM2101

      Getting started with the STEVAL-STLKT01V1 SensorTile integrated development platform

    • Description Version Size Action
      PM0237
      BlueNRG, BlueNRG-MS stacks programming guidelines
      7.1
      1.78 MB
      PDF
      PM0257
      BlueNRG-1, BlueNRG-2 BLE stack v2.x programming guidelines
      4.1
      1.06 MB
      PDF
      PM0237

      BlueNRG, BlueNRG-MS stacks programming guidelines

      PM0257

      BlueNRG-1, BlueNRG-2 BLE stack v2.x programming guidelines

Presentations & Training Material

    • Description Version Size Action
      FP-AUD-BVLINK1_Quick_start_guide 1.0
      3.08 MB
      PDF
      FP-AUD-BVLINK2_Quick_Start_Guide 1.1
      2.61 MB
      PDF
      How to use BlueCoin with STBlueMS mobile app hand-on and LABs 1.0
      5.44 MB
      PDF
      M24SR Product Presentation 2.1
      1.27 MB
      PDF
      ST25DV-I2C product presentation 2.2
      2.1 MB
      PDF
      STEVAL-BCNKT01V1 Quick start guide 1.02
      1.58 MB
      PDF
      STEVAL-STLKT01V1 Quick start guide 2.4
      2.02 MB
      PDF
      X-NUCLEO-IDB05A1 Quick start guide 1.6
      1.42 MB
      PDF

      FP-AUD-BVLINK1_Quick_start_guide

      FP-AUD-BVLINK2_Quick_Start_Guide

      How to use BlueCoin with STBlueMS mobile app hand-on and LABs

      M24SR Product Presentation

      ST25DV-I2C product presentation

      STEVAL-BCNKT01V1 Quick start guide

      STEVAL-STLKT01V1 Quick start guide

      X-NUCLEO-IDB05A1 Quick start guide

Publications and Collaterals

    • Description Version Size Action
      Battery management ICs - STBC02/03 Li-Ion charger with load switches and smart reset generator 04.2017
      730.72 KB
      PDF
      BlueNRG-1 Ultra-low-power Bluetooth® Low Energy System-on-Chip 1
      714.73 KB
      PDF
      BlueNRG-2 The IoT Ready Bluetooth® low energy System-on-Chip 4.0
      403.31 KB
      PDF
      NFC / RFID tags M24SR series 2.0
      1.24 MB
      PDF
      Resets and supervisors - portfolio overview 1.0
      1.31 MB
      PDF
      ST25DV-I2C series - Dynamic NFC/RFID tags 1.0
      1.47 MB
      PDF
      STWBC-EP Extended Wireless Power 12.2017
      817.57 KB
      PDF
      SensorTile an IoT design lab
      1.61 MB
      PDF
      Smart Reset ICs dual push-button 1.0
      767.58 KB
      PDF

      Battery management ICs - STBC02/03 Li-Ion charger with load switches and smart reset generator

      BlueNRG-1 Ultra-low-power Bluetooth® Low Energy System-on-Chip

      BlueNRG-2 The IoT Ready Bluetooth® low energy System-on-Chip

      NFC / RFID tags M24SR series

      Resets and supervisors - portfolio overview

      ST25DV-I2C series - Dynamic NFC/RFID tags

      STWBC-EP Extended Wireless Power

      SensorTile an IoT design lab

      Smart Reset ICs dual push-button

    • Description Version Size Action
      Linear and Switching Voltage Regulators Selection Guide 3.0
      370.88 KB
      PDF

      Linear and Switching Voltage Regulators Selection Guide

    • Description Version Size Action
      NFC solutions from ST 1.0
      3.53 MB
      PDF

      NFC solutions from ST

Embedded Software

    • Part Number

      Embedded software samples for BlueCoin: data streaming via USB and BLE, logging on SD card, gesture recognition, audio acquisition and playback

      Audio and inertial data streaming via Bluetooth® low energy using SPBTLE-1S very low power application module based on BlueNRG-1

      Setup for BlueNRG Kits

      BlueNRG-1, BlueNRG-2 DK SW package

      Embedded software samples for SensorTile, including sensor data streaming via USB and BLE, data logging on SD card, audio acquisition and playback

    • Part Number

      Bluetooth Low Energy software expansion for STM32Cube

      STM32Cube expansion software for X-NUCLEO-NFC01A1

      Dynamic NFC/RFID tag IC software expansion for STM32Cube

    • Part Number

      Application executable of the "NFC Tap" Android app for ST25 product family

      Firmware for ST25DV-DISCOVERY kit

      Application executable of the "NFC Tap" iOS app for ST25 product family

      Antenna Matching Tool for ST25R NFC/HF reader family

      Software Development Kit for ST25 Tags and Dynamic Tags

    • Part Number

      BlueNRG current consumption estimation tool

Audio ICs

Part number Description
MP23ABS1 High performance MEMS audio sensor single ended analog bottom-port microphone
MP34DT05-A MEMS audio sensor omnidirectional digital microphone, 64 dB SNR, -26 dBFS sensitivity, top-port, 122.5 dBSPL AOP
TS472 Very low noise microphone preamplifier with 2.0V bias output with active low stdby mode
TS482 100mW stereo headphone amplifier
Part number
High performance MEMS audio sensor single ended analog bottom-port microphone
MEMS audio sensor omnidirectional digital microphone, 64 dB SNR, -26 dBFS sensitivity, top-port, 122.5 dBSPL AOP
Very low noise microphone preamplifier with 2.0V bias output with active low stdby mode
100mW stereo headphone amplifier

Diodes and Rectifiers

Part number Description
FERD20U60DJFD 60 V, 20 A PowerFLAT Ultra-Low Vf Field-Effect Rectifier Diode (FERD)
Part number
60 V, 20 A PowerFLAT Ultra-Low Vf Field-Effect Rectifier Diode (FERD)

EMI Filtering and Signal Conditioning

Part number Description
BALF-NRG-02D3 50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter
Part number
50Ω / conjugate match balun to BlueNRG transceiver, with integrated harmonic filter

Imaging and Photonics Solutions

Part number Description
VL53L0X World smallest Time-of-Flight (ToF) ranging sensor
VL53L1X Long distance ranging Time-of-Flight sensor based on ST FlightSense technology
VL6180X Proximity sensor, gesture and ambient light sensing (ALS) module
Part number
World smallest Time-of-Flight (ToF) ranging sensor
Long distance ranging Time-of-Flight sensor based on ST FlightSense technology
Proximity sensor, gesture and ambient light sensing (ALS) module

Interfaces and Transceivers

Part number Description
STUSB1600 USB Type-C controller (with short-to-VBUS protection)
STUSB1602 USB Type-C controller (with Tx/Rx line driver and BMC)
STUSB4500 Stand-alone USB PD controller (with sink Auto-run mode)
Part number
USB Type-C controller (with short-to-VBUS protection)
USB Type-C controller (with Tx/Rx line driver and BMC)
Stand-alone USB PD controller (with sink Auto-run mode)

MEMS and Sensors

Part number Description
LIS25BA MEMS digital output motion sensor: low noise, high bandwith, 3-axis accelerometer with TDM interface
LIS2DH12 3-axis MEMS accelerometer, ultra-low-power, ±2g/±4g/±8g/±16g full scale, high-speed I2C/SPI digital output, embedded FIFO, high-performance acceleration sensor, VFLGA package
LIS2DW12 3-axis MEMS accelerometer, ultra low power, configurable single/double-tap recognition, free-fall, wakeup, portrait/landscape, 6D/4D orientation detections
Part number
MEMS digital output motion sensor: low noise, high bandwith, 3-axis accelerometer with TDM interface
3-axis MEMS accelerometer, ultra-low-power, ±2g/±4g/±8g/±16g full scale, high-speed I2C/SPI digital output, embedded FIFO, high-performance acceleration sensor, VFLGA package
3-axis MEMS accelerometer, ultra low power, configurable single/double-tap recognition, free-fall, wakeup, portrait/landscape, 6D/4D orientation detections

NFC

Part number Description
ST25DV04K 4-Kbit Dynamic NFC/RFID tag NFC Forum type V with I2C interface, fast transfer mode and energy harvesting
Part number
4-Kbit Dynamic NFC/RFID tag NFC Forum type V with I2C interface, fast transfer mode and energy harvesting

Power Management

Part number Description
L6924D Battery charger system with integrated power switch for Li-Ion/Li-Polymer
LDLN015 150 mA - ultra low noise - high PSRR linear voltage regulator IC
STBB3J 2A, 2MHz, high efficiency dual mode buck-boost DC-DC converter
STBC02 Li-Ion linear battery charger with LDO, load switches and reset generator
STC3117 Gas gauge IC with battery charger control for handheld applications
STLQ020 200 mA ultra-low quiescent current LDO
STWBC-EP Digital controller for wireless battery charger transmitters (WBC) in 15 W medium power applications
Part number
Battery charger system with integrated power switch for Li-Ion/Li-Polymer
150 mA - ultra low noise - high PSRR linear voltage regulator IC
2A, 2MHz, high efficiency dual mode buck-boost DC-DC converter
Li-Ion linear battery charger with LDO, load switches and reset generator
Gas gauge IC with battery charger control for handheld applications
200 mA ultra-low quiescent current LDO
Digital controller for wireless battery charger transmitters (WBC) in 15 W medium power applications

Protection Devices

Part number Description
ESDA6V1BC6 QUAD BIDIRECTIONAL TRANSIL SUPPRESSOR FOR ESD PROTECTION
ESDA7P120-1U1M High-power transient voltage supressor (TVS)
HSP053-4M5 4-line ESD protection for high-speed lines
Part number
QUAD BIDIRECTIONAL TRANSIL SUPPRESSOR FOR ESD PROTECTION
High-power transient voltage supressor (TVS)
4-line ESD protection for high-speed lines

Wireless Transceivers, MCUs and Modules

Part number Description
BlueNRG-2 Bluetooth® low energy wireless system-on-chip
BlueNRG-MS Bluetooth Low Energy Network Processor supporting Bluetooth 4.2 core specification
SPBTLE-1S Very low power application module for Bluetooth® Smart v4.2
SPBTLE-RF Very low power module for Bluetooth Smart v4.1
Part number
Bluetooth® low energy wireless system-on-chip
Bluetooth Low Energy Network Processor supporting Bluetooth 4.2 core specification
Very low power application module for Bluetooth® Smart v4.2
Very low power module for Bluetooth Smart v4.1