-
The L6362A is an IO-Link and SIO mode transceiver device compliant to PHY2 (3-wire connection) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes. The output stage can be configured as high-side, low-side or push-pull and it can drive resistive, capacitive and inductive loads. It can be connected to a sensor chip with the industrial 24 V environment. The industrial environment could be a PLC, an IO-Link master, a relay or a valve. The L6362A is protected against reverse polarity, among VCC, GND, OUTH, OUTL and I/Q pins. Furthermore, the IC is protected against output short-circuit, overvoltage and impulse voltage withstand (±1 kV pulse amplitude, 1.2/50 μs pulse duration, 500 Ω source impedance).
Key Features
- Supply voltage from 7 V to 36 V
- 5 V and 3.3 V compatible I/Os
- 5 V or 3.3 V, 10 mA selectable linear regulator
- 0.3 A output current intervention threshold
- Fully protected
- Reverse polarity
- Overload with cut-off function
- Overtemperature
- Undervoltage and overvoltage
- GND and VCC open wire
- -40 to +125 °C operating ambient temperature
- Selectable output stages: high-side, low-side, push-pull
- Suitable to drive L, C and R loads
- 30 μF output load drive capability
- Switching capability of inductors up to 500 mJ
- Wake-up detection supported
- Fast demagnetization of inductive loads
- COM1, COM2 and COM3 mode supported
- Designed to meet:
- Burst IEC 61000-4-4
- ESD IEC 61000-4-2
- Surge EN60947-5-2
- Miniaturized VFDFPN 12L (3x3x0.90 mm) package
Sample & Buy
| Part Number | Package | Packing Type | Marketing Status | Budgetary Price (US$)* | Quantity | ECCN (US) | Country of Origin | Order from Distributors | Order from ST |
|---|---|---|---|---|---|---|---|---|---|
| L6362ATR | VFDFPN 12 3X3X0.9 | Tape And Reel |
Active
|
1.022 | 10000 | EAR99 | PHILIPPINES | Check Availability | Buy now |
(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office  or our Distributors
Featured Videos
The first ST intelligent power switch with galvanic isolation on chip
Ecosystems
-
-
Picture Part number Manufacturer Description 
P-NUCLEO-IOD01A1 ST STM32 Nucleo pack for IO-Link device fully compatible with IO-Link v1.1 (PHY and stack) Part NumberSTM32 Nucleo pack for IO-Link device fully compatible with IO-Link v1.1 (PHY and stack)
-
Evaluation Tools
-
-
Picture Part number Manufacturer Description 
STEVAL-BFA001V1B ST Predictive maintenance kit with sensors and IO-Link capability 
STEVAL-IDP003V1 ST IO-Link industrial modular sensor board based on L6362A 
STEVAL-IFP017V3 ST Evaluation board for IO-Link transceiver device L6362A 
STEVAL-IOD003V1 ST IO-Link (PHY) device evaluation board based on L6362A with Arduino connectors for STM32 Nucleo Part NumberPredictive maintenance kit with sensors and IO-Link capability
IO-Link industrial modular sensor board based on L6362A
Evaluation board for IO-Link transceiver device L6362A
IO-Link (PHY) device evaluation board based on L6362A with Arduino connectors for STM32 Nucleo
-
| Part Number | Marketing Status | Package | Grade | RoHS Compliance Grade | Material Declaration** |
|---|---|---|---|---|---|
| L6362ATR |
Active
|
VFDFPN 12 3X3X0.9 | Industrial | Ecopack2 |
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
