STM32F103ZC

Active
Education

Mainstream Performance line, Arm Cortex-M3 MCU with 256 Kbytes of Flash memory, 72 MHz CPU, motor control, USB and CAN

Download datasheet
Overview
Online design
Sample & Buy
Solutions
Documentation
CAD Resources
Tools & Software
Quality & Reliability
Partner products
Sales Briefcase

Product overview

Description

The STM32F103xC, STM32F103xD and STM32F103xE performance line family incorporates the high-performance ARM® Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, four general-purpose 16-bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN. The STM32F103xC/D/E high-density performance line family operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.
These features make the STM32F103xC/D/E high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems video intercom, and HVAC.
  • All features

    • Core: ARM® 32-bit Cortex®-M3 CPU
      • 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
      • Single-cycle multiplication and hardware division
    • Memories
      • 256 to 512 Kbytes of Flash memory
      • up to 64 Kbytes of SRAM
      • Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
      • LCD parallel interface, 8080/6800 modes
    • Clock, reset and supply management
      • 2.0 to 3.6 V application supply and I/Os
      • POR, PDR, and programmable voltage detector (PVD)
      • 4-to-16 MHz crystal oscillator
      • Internal 8 MHz factory-trimmed RC
      • Internal 40 kHz RC with calibration
      • 32 kHz oscillator for RTC with calibration
    • Low power
      • Sleep, Stop and Standby modes
      • VBAT supply for RTC and backup registers
    • 3 × 12-bit, 1 μs A/D converters (up to 21 channels)
      • Conversion range: 0 to 3.6 V
      • Triple-sample and hold capability
      • Temperature sensor
    • 2 × 12-bit D/A converters
    • DMA: 12-channel DMA controller
      • Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs
    • Debug mode
      • Serial wire debug (SWD) & JTAG interfaces
      • Cortex®-M3 Embedded Trace Macrocell™
    • Up to 112 fast I/O ports
      • 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
    • Up to 11 timers
      • Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
      • 2 × 16-bit motor control PWM timers with dead-time generation and emergency stop
      • 2 × watchdog timers (Independent and Window)
      • SysTick timer: a 24-bit downcounter
      • 2 × 16-bit basic timers to drive the DAC
    • Up to 13 communication interfaces
      • Up to 2 × I2C interfaces (SMBus/PMBus)
      • Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
      • Up to 3 SPIs (18 Mbit/s), 2 with I2S interface multiplexed
      • CAN interface (2.0B Active)
      • USB 2.0 full speed interface
      • SDIO interface
    • CRC calculation unit, 96-bit unique ID
    • ECOPACK® packages

Circuit Diagram

You might also like...

All tools & software

    • Part number
      Status
      Description
      Type
      Supplier

      Enhanced Carrier Connectivity Services

      Active

      Optimized regional cellular connectivity with one point of accountability & invoice for multiple Tier-1 carrier services

      Cloud Sierra Wireless
      Enhanced Carrier Connectivity Services

      Description:

      Optimized regional cellular connectivity with one point of accountability & invoice for multiple Tier-1 carrier services

      Global Smart Connectivity Services

      Active

      Smart Connectivity simplifies IoT deployments, eliminates coverage gaps with access to multiple networks, while reducing the total cost of opportunity

      Cloud Sierra Wireless
      Global Smart Connectivity Services

      Description:

      Smart Connectivity simplifies IoT deployments, eliminates coverage gaps with access to multiple networks, while reducing the total cost of opportunity

      Octave Services

      Active

      Octave all-in-one platform for connecting IoT assets and microcontrollers to the cloud

      Cloud Sierra Wireless
      Octave Services

      Description:

      Octave all-in-one platform for connecting IoT assets and microcontrollers to the cloud
    • Part number
      Status
      Description
      Type
      Supplier

      Enhanced Carrier Connectivity SIM

      Active

      Cellular connectivity that simplifies, optimizes regional deployments via 1 point of accountability and invoice for multiple Tier-1 carrier services

      Components and Modules Sierra Wireless
      Enhanced Carrier Connectivity SIM

      Description:

      Cellular connectivity that simplifies, optimizes regional deployments via 1 point of accountability and invoice for multiple Tier-1 carrier services

      Global Smart Connectivity SIM

      Active

      Sierra Wireless' Smart Connectivity provides resilient Global cellular coverage in a single SIM

      Components and Modules Sierra Wireless
      Global Smart Connectivity SIM

      Description:

      Sierra Wireless' Smart Connectivity provides resilient Global cellular coverage in a single SIM

      Octave Cellular Modules

      Active

      Octave enabled LPWA/LTE-M connectivity with 2G fallback for any cellular network in the world

      Components and Modules Sierra Wireless
      Octave Cellular Modules

      Description:

      Octave enabled LPWA/LTE-M connectivity with 2G fallback for any cellular network in the world

      RF Modules

      Active

      RF modules for Sub GigaHz and Bluetooth.

      Components and Modules DiZiC
      RF Modules

      Description:

      RF modules for Sub GigaHz and Bluetooth.

      SensorTile.box

      Active

      SensorTile.box is an evaluation kit IoT node made up of an electronics board, a lithium rechargeble battery, a plastic housing and APP.

      Components and Modules FAE Technology
      SensorTile.box

      Description:

      SensorTile.box is an evaluation kit IoT node made up of an electronics board, a lithium rechargeble battery, a plastic housing and APP.