The STM32F410 line is the entry level to the STM32 F4 series. It is designed for medical, industrial and consumer applications requiring balanced performance and power efficiency with a high level of integration of embedded memories and peripherals inside packages as small as 2.553 x 2.579 mm, in the most cost-effective way. The STM32F410 offers the performance of the
Cortex-M4 core (with floating point unit) running at 100 MHz while reaching outstanding power figures in Run and Stop modes.
Performance: At 100 MHz, the STM32F410 delivers 125 DMIPS/339 CoreMark performance executing from Flash memory, with 0-wait states using ST’s ART Accelerator. The DSP instructions and the floating point unit enlarge the range of addressable applications.
Power efficiency: ST’s 90 nm process, ART Accelerator and the dynamic power scaling enables the current consumption in run mode and executing from Flash memory to be as low as 89 µA/MHz. In Stop mode, the power consumption can be as low as 6 µA typical.
- Audio: dedicated audio PLL and 3 full duplex I²S
- Up to 9 communication interfaces (including 3x USARTs running at up to 10.5 Mbit/s, 3x SPI running at up to 42 Mbit/s, 3x I²C)
- Analog: one 12-bit ADC reaching 2.4 MSPS, one 12-bits DAC
- Up to 9 timers: 16-bit, 32-bit, LP, WDT and Systick running at up to 100 MHz
- Random number generator
Integration: The STM32F410 portfolio provides from 64 to 128Kbytes of Flash, 32 Kbytes of SRAM and from 36 to 64 pins in packages as small as 2.553 x 2.579 mm.
As part of our embedded online event, we had the pleasure of filming with Reinhard Keil, a Senior Director of Embedded Tools at ARM.
This video is about the STM32L5, our recently announced ultra-low power microcontroller bringing a new security dimension. The STM32L5 is now in full production and all its ecosystem is available including hardware kits, software tools, firmware and all documentations of course. This is our first STM32 based on Cortex-M33 and its Trustzone and using specific ST security implementation - watch the video to find out more!
The STM32L5 is based on Arm® Cortex-M33 and TrustZone® technology combined with STMicroelectronics security implementation. On your STM32L562E-DK discovery board, TrustZone is disabled (factory setting) and you can develop as on any other STM32 device. This video shows how to enable TrustZone on STM32L562E-DK discovery using STM32CubeProgrammer and create, compile and debug or run a new project with STM32CubeIDE. It also shows how to open an example project delivered in STM32CubeL5 MCU Package, modify, compile and debug or run it. For further information, you can refer to AN5394 and AN5424 application notes.