The STSPIN840 is a compact brushed DC motor driver able to drive two bi-directional brushed DC motors simultaneously. It integrates, in a very small 4 x 4 mm QFN package, both the control logic and a fully protected low RDSon dual full-bridge power stage.
Thanks to a dedicated PARALLEL input pin the parallel mode function can be enabled, transforming the device in an equivalent and more powerful single full-bridge able to deliver up to 3Arms current at an equivalent HS + LS RDSon of 500 mΩ.
The STSPIN840 embeds two independent PWM current controllers (one for each full bridge) based on user settable values of reference voltage and OFF time.
The devices can be forced in a low consumption state reducing the total current consumption down to less than 45 μA.
As with all other devices from the STSPIN family, the STSPIN840 integrates a complete set of protections for the power stages (non-dissipative overcurrent, thermal shutdown, short-circuit and undervoltage lockout) making it a bulletproof solution for the new wave of demanding industrial applications.
- Operating voltage from 7 to 45 V
- Maximum output current 1.5 Arms
- RDSon HS + LS = 1 Ω typ.
- Current control with adjustable OFF time
- Current sensing based on external shunt resistors
- Full protections set
- Non-dissipative overcurrent protection
- Short-circuit protection
- Undervoltage lockout
- Thermal shutdown
- Parallel operation mode achieving single full-bridge configuration with output IRMS = 3 Arms and RDSon HS + LS = 500 mΩ typ.
- Low standby current consumption
|Part Number||Marketing Status||Package||Grade||Marketing Lead Time Qty||Material Declaration**|
|TFQFPN 24L 4X4X1.05||Industrial||-|
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
Extend the Runtime of Your Battery-Powered ApplicationsSTSW-SPIN002
Evaluation software with graphical user interface for STSPIN motor driver ICs
X-NUCLEO expansion boards and X-CUBE softwareX-NUCLEO-IHM06A1
Low voltage stepper motor driver expansion board based on the STSPIN220 for STM32 NucleoX-CUBE-SPN6
Low voltage stepper motor driver software expansion for STM32CubeX-NUCLEO-IHM11M1
Low voltage three-phase brushless DC motor driver expansion board based on STSPIN230 for STM32 NucleoX-CUBE-SPN11
Low voltage three-phase brushless DC motor driver software expansion for STM32CubeX-NUCLEO-IHM12A1
Low voltage dual brush DC motor driver expansion board based on STSPIN240 for STM32 NucleoX-CUBE-SPN12
Low voltage dual brush DC motor driver software expansion for STM32Cube