SensorTile module (STEVAL-STLCS01V1) with STM32L476JG, LSM6DSM, LSM303AGR, LPS22HB, MP34DT05-A, BlueNRG-MS, BALF-NRG-02D3 and LD39115J18R
SensorTile expansion Cradle board equipped with audio DAC, USB port, STM32 Nucleo, Arduino UNO R3 and SWD connector
SensorTile Cradle with battery charger, humidity and temperature sensor, SD memory card slot, USB port and breakaway SWD connector
100 mAh Li-Ion battery
Plastic box
SWD programming cable
Software libraries and tools
STSW-STLKT01: SensorTile firmware package that supports sensors raw data streaming via USB, data logging on SDCard, audio acquisition and audio streaming.
FP-SNS-ALLMEMS1 and FP-SNS-MOTENV1: STM32Cube function packs
STBLESensor: iOS and Android demo Apps
BlueST-SDK: iOS and Android Software Development Kit
CE certified
RoHS and China RoHS compliant
WEEE compliant
FCC (ID: S9NSTILE01) certified
IC (IC: 8976C-STILE01) certified with PMN: STEVAL-STLKT01V1; HVIN: STEVAL-STLCS01V1; HMN: STEVAL-STLCX01V1; FVIN: bluenrg_7_1_e_Mode_2-32MHz-XO32K_4M.img
Bluetooth® SMART board based on the BlueNRG-2 Bluetooth low energy system on chip
Associated BlueNRG-2 development kit SW package including firmware and documentation
Up to +8 dBm available output power (at antenna connector)
Excellent receiver sensitivity (-88 dBm)
Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
Bluetooth® SMART specification compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature
Integrated balun which integrates a matching network and harmonics filter
SMA connector for antenna or measuring equipment
3 user LEDs
2 user buttons
3D digital accelerometer and 3D digital gyroscope
MEMS pressure sensor with embedded temperature sensor
Plastic box for housing the BlueCoin cradle and the battery
SWD programming cable
Software libraries and tools:
STSW-BCNKT01 firmware package with raw sensor data streaming support via USB, data logging on SDCard, audio acquisition and audio streaming, time-of-flight example and BLE protocol to interface to a Smartphone App
FP-AUD-SMARTMIC1: smart audio IN-OUT software expansion for STM32Cube
FP-SNS-ALLMEMS1: STM32 ODE function pack for BLE and sensors
FP-AUD-BVLINK1: BLE and microphones software expansion for STM32Cube
STBLESensor: iOS™ and Android™ demo apps
BlueST-SDK: iOS and Android software development kit
Compatible with STM32 ecosystem through STM32Cube support
Compact flight controller unit (FCU) evaluation board complete with sample firmware for a small or medium sized quadcopter
On-board LiPo 1-cell battery charger
Possibility to directly drive 4 DC brushed motors through the low voltage on-board MOSFET or alternatively use external ESC for DC brushless motor configuration
Main components:
STM32F401 – 32-bit MCU with ARM® Cortex®
LSM6DSL – iNEMO intertial module: 3D accelerometer and 3D gyroscope
Smart Energy Meter design with wireless connectivity
BLE (Bluetooth Low Energy) v4.2 connectivity for control and metering panel: Smart-phone connectivity for energy consumption dashboard, control of appliances
Dimming: Some loads can be controlled. For example, AC Induction fan speed, Heaters, Incandescent lamps
Scheduling: Set the time of day for ON or OFF of the load
NFC interface: To configure the design, store the logs (connector for adapter board)
Bluetooth® low energy technology board based on the BlueNRG-248 (QFN48) ultra-low-power system on chip
Associated BlueNRG-2 development kit SW package including firmware and documentation
Up to +8 dBm available output power (at antenna connector)
Excellent receiver sensitivity (-88 dBm)
Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
Bluetooth® low energy technology v5.0 compliant: supports master, slave, simultaneous master-and-slave roles, and the Bluetooth low energy extended data length feature
Edge processing enabling Condition Monitoring and Predictive Maintenance: quick start for end to end architecture based on wired Smart Sensor Nodes and Gateway
Vibration monitoring data in the form of vibration speed (RMS), peak acceleration, and FFTs by STM32 core on vibration data from ST industrial sensors.
Temperature, humidity and pressure data from ST environmental sensors.
Condition monitoring example demonstrating Edge node processing of data from a 4-channel IO-Link master, in communication with a Cloud application via a secure gateway.
End-to-end communication framework allowing Condition Monitoring platform to develop into a Predictive Maintenance solution.
Further processing potential on Edge node with AWS Greengrass and Lambda functions.
Cloud Dashboard to register and provision the devices, configure a gateway for Edge processing, assign a gateway to a group of devices, analyze real time and historical data, and set thresholds to trigger alerts for particular equipment conditions.
Free usage terms for a limited number of sensors and gateways, and for a limited time, as part of the DSH-PREDMNT Cloud application user license agreement.
Based on STM32Cube and STM32OpenSTLinux expansion packages.
Serverless deployment of the Dashboard application in user account through Cloud Formation tool.
SensorTile module (STEVAL-STLCS01V1) with STM32L476JG, LSM6DSM, LSM303AGR, LPS22HB, MP34DT05-A, BlueNRG-MS, BALF-NRG-02D3 and LD39115J18R
SensorTile expansion Cradle board equipped with audio DAC, USB port, STM32 Nucleo, Arduino UNO R3 and SWD connector
SensorTile Cradle with battery charger, humidity and temperature sensor, SD memory card slot, USB port and breakaway SWD connector
100 mAh Li-Ion battery
Plastic box
SWD programming cable
Software libraries and tools
STSW-STLKT01: SensorTile firmware package that supports sensors raw data streaming via USB, data logging on SDCard, audio acquisition and audio streaming.
FP-SNS-ALLMEMS1 and FP-SNS-MOTENV1: STM32Cube function packs
STBLESensor: iOS and Android demo Apps
BlueST-SDK: iOS and Android Software Development Kit
CE certified
RoHS and China RoHS compliant
WEEE compliant
FCC (ID: S9NSTILE01) certified
IC (IC: 8976C-STILE01) certified with PMN: STEVAL-STLKT01V1; HVIN: STEVAL-STLCS01V1; HMN: STEVAL-STLCX01V1; FVIN: bluenrg_7_1_e_Mode_2-32MHz-XO32K_4M.img
Bluetooth® SMART board based on the BlueNRG-2 Bluetooth low energy system on chip
Associated BlueNRG-2 development kit SW package including firmware and documentation
Up to +8 dBm available output power (at antenna connector)
Excellent receiver sensitivity (-88 dBm)
Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
Bluetooth® SMART specification compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature
Integrated balun which integrates a matching network and harmonics filter
SMA connector for antenna or measuring equipment
3 user LEDs
2 user buttons
3D digital accelerometer and 3D digital gyroscope
MEMS pressure sensor with embedded temperature sensor
Plastic box for housing the BlueCoin cradle and the battery
SWD programming cable
Software libraries and tools:
STSW-BCNKT01 firmware package with raw sensor data streaming support via USB, data logging on SDCard, audio acquisition and audio streaming, time-of-flight example and BLE protocol to interface to a Smartphone App
FP-AUD-SMARTMIC1: smart audio IN-OUT software expansion for STM32Cube
FP-SNS-ALLMEMS1: STM32 ODE function pack for BLE and sensors
FP-AUD-BVLINK1: BLE and microphones software expansion for STM32Cube
STBLESensor: iOS™ and Android™ demo apps
BlueST-SDK: iOS and Android software development kit
Compatible with STM32 ecosystem through STM32Cube support
Compact flight controller unit (FCU) evaluation board complete with sample firmware for a small or medium sized quadcopter
On-board LiPo 1-cell battery charger
Possibility to directly drive 4 DC brushed motors through the low voltage on-board MOSFET or alternatively use external ESC for DC brushless motor configuration
Main components:
STM32F401 – 32-bit MCU with ARM® Cortex®
LSM6DSL – iNEMO intertial module: 3D accelerometer and 3D gyroscope
Smart Energy Meter design with wireless connectivity
BLE (Bluetooth Low Energy) v4.2 connectivity for control and metering panel: Smart-phone connectivity for energy consumption dashboard, control of appliances
Dimming: Some loads can be controlled. For example, AC Induction fan speed, Heaters, Incandescent lamps
Scheduling: Set the time of day for ON or OFF of the load
NFC interface: To configure the design, store the logs (connector for adapter board)
Bluetooth® low energy technology board based on the BlueNRG-248 (QFN48) ultra-low-power system on chip
Associated BlueNRG-2 development kit SW package including firmware and documentation
Up to +8 dBm available output power (at antenna connector)
Excellent receiver sensitivity (-88 dBm)
Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
Bluetooth® low energy technology v5.0 compliant: supports master, slave, simultaneous master-and-slave roles, and the Bluetooth low energy extended data length feature
Edge processing enabling Condition Monitoring and Predictive Maintenance: quick start for end to end architecture based on wired Smart Sensor Nodes and Gateway
Vibration monitoring data in the form of vibration speed (RMS), peak acceleration, and FFTs by STM32 core on vibration data from ST industrial sensors.
Temperature, humidity and pressure data from ST environmental sensors.
Condition monitoring example demonstrating Edge node processing of data from a 4-channel IO-Link master, in communication with a Cloud application via a secure gateway.
End-to-end communication framework allowing Condition Monitoring platform to develop into a Predictive Maintenance solution.
Further processing potential on Edge node with AWS Greengrass and Lambda functions.
Cloud Dashboard to register and provision the devices, configure a gateway for Edge processing, assign a gateway to a group of devices, analyze real time and historical data, and set thresholds to trigger alerts for particular equipment conditions.
Free usage terms for a limited number of sensors and gateways, and for a limited time, as part of the DSH-PREDMNT Cloud application user license agreement.
Based on STM32Cube and STM32OpenSTLinux expansion packages.
Serverless deployment of the Dashboard application in user account through Cloud Formation tool.
STM32Cube MCU Package for STM32WB series (HAL and LL low level drivers, USB, File system, RTOS - coming with examples running on ST boards: STM32 Nucleo, Discovery kits and Evaluation boards)
STM32Cube MCU Package for STM32WB series (HAL and LL low level drivers, USB, File system, RTOS - coming with examples running on ST boards: STM32 Nucleo, Discovery kits and Evaluation boards)
