Overview
Solutions
HW Evaluation Tools
Resources
Tools and Software
Key Products
Get Started

Connecting vehicles, and their internal networks, to the external world using Vehicle-to-Vehicle (V2V), Vehicle-to-Infrastructure (V2I) or Vehicle-to-Everything (V2X) communications is the key enabler in creating and delivering mobility services designed to enhance convenience and safety in order to ultimately provide a better driving experience.

Connected cars, though, are vulnerable to malicious attacks that are either remote, such as unauthorized access through an external vehicle interface, or local, where a compromised ECU could be used to attack other ECUs through in-car networking.

ST provides advanced solutions from 32-bit microcontrollers with an embedded hardware security module (HSM) for robust secure solutions with tamper-resistant Secure Elements compliant with the latest security standards and Common Criteria and EAL5+ level certifications.

Part Number
Description
EVB-T3 TESEO III evaluation board Quick view

Key Features

  • ST Teseo III GNSS platform;
  • Multiconstellation GNSS: GPS, Galileo, Glonass, Beidou, QZSS are supported;
  • USB Power Supply and battery charge;
  • Internal battery for standalone usage;
  • ON/OFF and Reset buttons available;
  • NMEA over:
    • Bluetooth;
    • UART by USB;
    • USB;
  • μSD/MMC card reader for easy logging;
  • ST 3 axis gyroscope, ST 3 axis accelerometer and ST pressure sensor to enable ST Teseo DRAW1;
  • PPS output;
  • Leds:
    • PPS
    • Fix status
    • Antenna sensing
    • Power

Show More

EVAL-L5963Q L5963Q evaluation board Quick view

Key Features

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

Show More

STEVAL-MKI109V3 Professional MEMS tool: ST MEMS adapters motherboard based on the STM32F401VE and compatible with all ST MEMS adapters Quick view

Key Features

  • Compatible with all available ST MEMS adapter boards
  • Controlled by the STM32F401VE high-performance ARM Cortex™ - M4 microcontroller
  • Software-adjustable power circuitry to set sensor supply voltage from 0 to 3.6 V
  • Includes a DIL24 socket for easy MEMS adapter connection
  • Adjustable MEMS DIL24 power supply
  • DFU-compatible for USB microprocessor firmware update
  • USB 2.0 full-speed compliant
  • Embedded power monitoring circuitry on sensor supply voltage and current
  • Debugging connector for SWD/JTAG
  • Can be used with PC software like Unico GUI to manage and analyze MEMS sensor data
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-OET003V1 Evaluation board for automotive-grade ESD protection Quick view

Key Features

  • Input voltage 5 V
  • 12 V output, step-up converter for transceiver supply voltage
  • LIN transceiver
  • CAN transceiver
  • Automotive-grade ESD protection
  • IEC61000-4-2 compatibility

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL-L5963 L5963 Evaluation board Quick view

Key Features

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

Show More

FEATURED RESOURCES

Schematics Gerber
STEVAL-MKI158V1 AIS3624DQ adapter board for a standard DIL24 socket Quick view

Key Features

  • Complete AIS3624DQ pin-out for a standard DIL24 socket
  • Fully compatible with STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
SPC5-UDEDEBG PLS JTAG debugger software full license or license renewal Quick view

Key Features

  • Supports both SPC5-UDESTK standalone and the equivalent version embedded into Discovery board.
  • Supports SPC5x MCUs
  • Supports Multicore, eTPU and GTM debugging
  • Includes FLASH programming capability
  • Support service provided through STMicroelectronics

Show More

STEVAL-MKI125V1 A3G4250D adapter board for standard DIL 24 socket Quick view

Key Features

  • Complete A3G4250D pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA100V1 3 A step-down switching demonstration board based on the L7986A in HSOP8 package Quick view

Key Features

  • 3 A DC output current
  • 4.5 V to 38 V input voltage
  • Output voltage adjustable from 0.6 V
  • 250 kHz switching frequency, programmable up to 1 MHz
  • Internal soft-start and enable
  • Low dropout operation: 100% duty cycle
  • Voltage feed-forward
  • Zero load current operation
  • Overcurrent and thermal protection
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI109V2 eMotion: ST MEMS adapters motherboard based on STM32F103, compatible with all ST MEMS adapter boards Quick view

Key Features

  • Compatible with all available ST MEMS adapter boards
  • Controlled by the STM32F103RET6 high-performance ARM Cortex -M3 microcontroller
  • Includes a DIL24 socket for easy MEMS adapter connection
  • 3 V on-board linear voltage regulator
  • DFU compatible for USB microprocessor firmware update
  • USB 2.0 full-speed compliant
  • Debugging connector for SWD/JTAG
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI110V1 AIS328DQ adapter board for standard DIL24 socket Quick view

Key Features

  • Complete AIS328DQ pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics Gerber
Part Number
EVB-T3

TESEO III evaluation board

Key Features

  • ST Teseo III GNSS platform;
  • Multiconstellation GNSS: GPS, Galileo, Glonass, Beidou, QZSS are supported;
  • USB Power Supply and battery charge;
  • Internal battery for standalone usage;
  • ON/OFF and Reset buttons available;
  • NMEA over:
    • Bluetooth;
    • UART by USB;
    • USB;
  • μSD/MMC card reader for easy logging;
  • ST 3 axis gyroscope, ST 3 axis accelerometer and ST pressure sensor to enable ST Teseo DRAW1;
  • PPS output;
  • Leds:
    • PPS
    • Fix status
    • Antenna sensing
    • Power

Show More

EVAL-L5963Q

L5963Q evaluation board

Key Features

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

Show More

STEVAL-MKI109V3

Professional MEMS tool: ST MEMS adapters motherboard based on the STM32F401VE and compatible with all ST MEMS adapters

Key Features

  • Compatible with all available ST MEMS adapter boards
  • Controlled by the STM32F401VE high-performance ARM Cortex™ - M4 microcontroller
  • Software-adjustable power circuitry to set sensor supply voltage from 0 to 3.6 V
  • Includes a DIL24 socket for easy MEMS adapter connection
  • Adjustable MEMS DIL24 power supply
  • DFU-compatible for USB microprocessor firmware update
  • USB 2.0 full-speed compliant
  • Embedded power monitoring circuitry on sensor supply voltage and current
  • Debugging connector for SWD/JTAG
  • Can be used with PC software like Unico GUI to manage and analyze MEMS sensor data
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-OET003V1

Evaluation board for automotive-grade ESD protection

Key Features

  • Input voltage 5 V
  • 12 V output, step-up converter for transceiver supply voltage
  • LIN transceiver
  • CAN transceiver
  • Automotive-grade ESD protection
  • IEC61000-4-2 compatibility

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL-L5963

L5963 Evaluation board

Key Features

  • DC-DC1 working at 1.2 V, 2 MHz
  • DC-DC2 working at 5 V, 250 kHz
  • Input connector to sync a different working frequency up to 2MHz
  • Oscillator on board to change working frequency up to 2MHz
  • DC-DC1 and DC-DC2 working up to 3A
  • LDO working at 3.3 V, 250 mA
  • Possibility to change output voltages
  • Jumpers to enable or disable DC-DC
  • Jumpers to enable or disable LDO
  • Pins to independently supply DC-DC1 and DC-DC2 together with LDO
  • Output connectors to check output voltages

Show More

FEATURED RESOURCES

Schematics Gerber
STEVAL-MKI158V1

AIS3624DQ adapter board for a standard DIL24 socket

Key Features

  • Complete AIS3624DQ pin-out for a standard DIL24 socket
  • Fully compatible with STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
SPC5-UDEDEBG

PLS JTAG debugger software full license or license renewal

Key Features

  • Supports both SPC5-UDESTK standalone and the equivalent version embedded into Discovery board.
  • Supports SPC5x MCUs
  • Supports Multicore, eTPU and GTM debugging
  • Includes FLASH programming capability
  • Support service provided through STMicroelectronics

Show More

STEVAL-MKI125V1

A3G4250D adapter board for standard DIL 24 socket

Key Features

  • Complete A3G4250D pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA100V1

3 A step-down switching demonstration board based on the L7986A in HSOP8 package

Key Features

  • 3 A DC output current
  • 4.5 V to 38 V input voltage
  • Output voltage adjustable from 0.6 V
  • 250 kHz switching frequency, programmable up to 1 MHz
  • Internal soft-start and enable
  • Low dropout operation: 100% duty cycle
  • Voltage feed-forward
  • Zero load current operation
  • Overcurrent and thermal protection
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI109V2

eMotion: ST MEMS adapters motherboard based on STM32F103, compatible with all ST MEMS adapter boards

Key Features

  • Compatible with all available ST MEMS adapter boards
  • Controlled by the STM32F103RET6 high-performance ARM Cortex -M3 microcontroller
  • Includes a DIL24 socket for easy MEMS adapter connection
  • 3 V on-board linear voltage regulator
  • DFU compatible for USB microprocessor firmware update
  • USB 2.0 full-speed compliant
  • Debugging connector for SWD/JTAG
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-MKI110V1

AIS328DQ adapter board for standard DIL24 socket

Key Features

  • Complete AIS328DQ pinout for a standard DIL 24 socket
  • Fully compatible with the STEVAL-MKI109V2 motherboard
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics Gerber
00 Files selected for download

Technical Documentation

    • Description Version Size Action
      AN5092
      AIS328DQ: high-performance, ultra-low-power, 3-axis digital output accelerometer for automotive non-safety applications
      2.0
      521.09 KB
      PDF
      AN4218
      Hardware design guideline power supply and voltage measurement
      3.0
      1.4 MB
      PDF
      AN2689
      Protection of automotive electronics from electrical hazards, guidelines for design and component selection
      3.1
      797.51 KB
      PDF
      AN5092

      AIS328DQ: high-performance, ultra-low-power, 3-axis digital output accelerometer for automotive non-safety applications

      AN4218

      Hardware design guideline power supply and voltage measurement

      AN2689

      Protection of automotive electronics from electrical hazards, guidelines for design and component selection

    • Description Version Size Action
      TN1189
      A3G4250D: supplementary data related to the 3-axis digital output gyroscope
      1.0
      160.14 KB
      PDF
      TN0897
      ST SPI protocol
      2.2
      420.96 KB
      PDF
      TN0018
      Surface mounting guidelines for MEMS sensors in an LGA package
      6.0
      214.31 KB
      PDF
      TN1189

      A3G4250D: supplementary data related to the 3-axis digital output gyroscope

      TN0897

      ST SPI protocol

      TN0018

      Surface mounting guidelines for MEMS sensors in an LGA package

Presentations & Training Material

    • Description Version Size Action
      Automotive Security implementation for Secure Driving 1.0
      1.52 MB
      PDF
      EEPROM Advanced Automotive products 1.0
      671.53 KB
      PDF

      Automotive Security implementation for Secure Driving

      EEPROM Advanced Automotive products

Publications and Collaterals

    • Description Version Size Action
      A798x, A597x switching regulators for car power management 1.0
      714.2 KB
      PDF
      Automotive 600V RQ Ultrafast diode series - soft reverse recovery and low Vf - for output circuits 1.0
      718.85 KB
      PDF
      Automotive multichannel power management ICs 1.0
      698.09 KB
      PDF
      MEMS automotive sensors - Making our cars safer and more comfortable 1.0
      773.66 KB
      PDF
      Processor for Telematics and Connectivity 1.0
      5.69 MB
      PDF
      SOD123Flat AEC-Q101-qualified power Schottky diodes 1.1
      1.39 MB
      PDF
      SOD128Flat Automotive-grade rectifiers 1.0
      1.42 MB
      PDF
      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers 2.3
      540.46 KB
      PDF
      TESEO-DRAW Dead Reckoning Automotive Way 1.0
      2.3 MB
      PDF
      TESEOIII: GPS/Galileo/Glonass/BeiDou/QZSS standalone receiver 1.0
      754.65 KB
      PDF
      Telemaco3P : Automotive Processor for Secure Telematics and Connectivity 1.0
      712.64 KB
      PDF

      A798x, A597x switching regulators for car power management

      Automotive 600V RQ Ultrafast diode series - soft reverse recovery and low Vf - for output circuits

      Automotive multichannel power management ICs

      MEMS automotive sensors - Making our cars safer and more comfortable

      Processor for Telematics and Connectivity

      SOD123Flat AEC-Q101-qualified power Schottky diodes

      SOD128Flat Automotive-grade rectifiers

      ST33G1M2A, ST33G1M2M Secure automotive and M2M microcontrollers

      TESEO-DRAW Dead Reckoning Automotive Way

      TESEOIII: GPS/Galileo/Glonass/BeiDou/QZSS standalone receiver

      Telemaco3P : Automotive Processor for Secure Telematics and Connectivity

    • Description Version Size Action
      Automotive-grade protection devices and rectifiers 1.0
      825.43 KB
      PDF
      EEPROM Advanced Automotive selection guide 1.0
      709.5 KB
      PDF
      Power amplifiers and voltage regulators
      750.29 KB
      PDF
      Smart power solutions for car body applications 4.0
      3.38 MB
      PDF

      Automotive-grade protection devices and rectifiers

      EEPROM Advanced Automotive selection guide

      Power amplifiers and voltage regulators

      Smart power solutions for car body applications

    • Description Version Size Action
      Driving smart power in automotive 1.0
      1.24 MB
      PDF
      SPC58 C-line 1.0
      933.22 KB
      PDF

      Driving smart power in automotive

      SPC58 C-line

Design Tools

    • Part Number

      Smart Selector for Micro 32bit Power Architecture products

Development Tools

    • Part Number

      Code Generator, Quick resources configurator and Eclipse development environment for SPC5 MCUs

      SPC5-UDESTK Debugging Software for Windows

Embedded Software

    • Part Number

      Dead Reckoning Automotive Way - Sensor fusion firmware for Teseo Family (STA80)

      PC software tool to manage, configure and evaluate the performances of Teseo GNSS family

    • Part Number

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

    • Part Number

      Android sensor HAL for MEMS motion and environmental sensors (Industrial I/O framework)

      Android sensor HAL for MEMS motion and environmental sensors (Input framework)

      Standard C platform-independent drivers for MEMS motion and environmental sensors

      Linux device drivers for MEMS motion and environmental sensors (Industrial I/O framework)

      Linux device drivers for MEMS motion and environmental sensors (Input framework)

eDesignSuite

Converter

Input

V This option is required. And must be less than or equal to Volt. Max [V]
V This option is required. And must be greater than or equal to Volt. Min [V]

Output Power

V This option is required and must be a number.
A This option is required and must be a number.

Diodes (Power Schottky & FERD) Smart Selector

TVS Smart Selector

Automotive Analog and Power

Part number Description
L5963 Dual monolithic switching regulator with LDO and HSD
L9616 High Speed Can Bus Transceiver
Part number
Dual monolithic switching regulator with LDO and HSD
High Speed Can Bus Transceiver

Automotive Microcontrollers

Part number Description
SPC58EC80C3 32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family
Part number
32-bit Power Architecture MCU for Automotive General Purpose Applications - Chorus family

MEMS and Sensors

Part number Description
A3G4250D 3-axis digital gyroscope for automotive telematics, navigation applications, AEC-Q100 qualified
AIS328DQ Automotive 3-axis accelerometer, ultra low power, SPI/I2C digital output, AEC-Q100 qualified
AIS3624DQ 3-axis accelerometer for non-safety automotive applications, ultra low power, SPI/I2C digital output, AEC-Q100 qualified
ASM330LHH Automotive 6-axis inertial module: 3D accelerometer and 3D gyroscope
Part number
3-axis digital gyroscope for automotive telematics, navigation applications, AEC-Q100 qualified
Automotive 3-axis accelerometer, ultra low power, SPI/I2C digital output, AEC-Q100 qualified
3-axis accelerometer for non-safety automotive applications, ultra low power, SPI/I2C digital output, AEC-Q100 qualified
Automotive 6-axis inertial module: 3D accelerometer and 3D gyroscope

Protection Devices

Part number Description
ESDAXLC6-1BT2Y Automotive single-line bidirectional ESD protection for high speed interface
Part number
Automotive single-line bidirectional ESD protection for high speed interface

Secure MCUs

Part number Description
ST33G1M0A 32bit ARM® SecurCore® SC300 optimized for M2M for car
ST33J2M0 32bit ARM® SecurCore® SC300 with secure integrity architecture, AES, DES, Nescrypt public key co-processors
Part number
32bit ARM® SecurCore® SC300 optimized for M2M for car
32bit ARM® SecurCore® SC300 with secure integrity architecture, AES, DES, Nescrypt public key co-processors