The ISM303DAC is a high-performance, low-power system-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor.
The ISM303DAC has user-selectable linear acceleration full scales of ±2g/±4g/±8g/±16 g and is capable of measuring accelerations with output data rates from 1 Hz to 6400 Hz. The device has a magnetic field dynamic range of up to ±50 gauss with output data rates from10 Hz to 150 Hz. The ISM303DAC includes an I2C serial bus interface that supports standard, fast mode, fast mode plus, and high-speed (100 kHz, 400 kHz, 1 MHz, and 3.4 MHz) and an SPI serial standard interface.
The ISM303DAC has an integrated 256-level first-in, first-out (FIFO) buffer for the accelerometer data which can be used to limit the intervention of the host processor.
The embedded self-test capability allows the user to check the functioning of the sensor in the final application.
The system can be configured to generate an interrupt signal for free-fall, motion detection and magnetic field detection. The magnetic and accelerometer blocks can be enabled or put into power-down mode separately.
The ISM303DAC is available in a plastic land grid array package (LGA) and is guaranteed to operate over an extended temperature range from -40 °C to +85 °C.
- 3 magnetic field channels and 3 acceleration channels
- Up to ±50 gauss magnetic dynamic range
- ±2/±4/±8/±16 g selectable acceleration full scales
- Dynamic switching between high-resolution, high-frequency and low-power modes
- 16-bit data output
- SPI / I2C serial interfaces
- Analog supply voltage 1.71 V to 1.98 V
- Programmable interrupt generators for free-fall, motion and magnetic field detection
- Embedded self-test both for the accelerometer and magnetometer
- Embedded 256-level FIFO
- Embedded temperature sensor
- ECOPACK®, RoHS and “Green” compliant
You might also like...
Android / Linux sensor HAL for MEMS motion and environmental sensors (Industrial I/O framework)
Standard C platform-independent drivers for MEMS motion and environmental sensors
Android sensor HAL for MEMS motion and environmental sensors (Input framework)
Recommended for you
Events and Seminars
EDA Symbols, Footprints and 3D Models
STMicroelectronics - ISM303DAC
Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.
Quality and Reliability
|Part Number||Marketing Status||Package||RoHS Compliance Grade||Material Declaration**|
|LGA 2X2X1 12LD PITCH 0.5MM||Ecopack2|
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
Sample & Buy
|Part Number||Order from distributors||Order from ST||Marketing Status||ECCN (US)||ECCN (EU)||Packing Type||Package||Temperature (°C)||Country of Origin||Budgetary Price (US$)*/Qty|
|ISM303DACTR|| distributors |
Distributor availability of ISM303DACTR
Distributor reported inventory date:
| Buy from Distributor || |
|EAR99||NEC||Tape and Reel||LGA 2X2X1 12LD PITCH 0.5MM||-40||105||MALTA|| |
Tape and Reel
Operating Temperature (°C)
Country of Origin:
(*) Suggested Resale Price (USD) per defined quantity for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors