Overview
Sample & Buy
Solutions
Documentation
CAD Resources
Tools & Software
Quality & Reliability
eDesignSuite
Get Started
Partner products
Sales Briefcase
  • The S2-LPTX is a high performance ultra-low power RF transmitter, intended for RF wireless applications in the sub-1 GHz band. It is designed to operate in both the license-free ISM and SRD frequency bands at 433, 868 and 920 MHz, but can also be programmed to operate at other additional frequencies in the 413-479 MHz, 826-958 MH.

    The S2-LPTX supports different modulation schemes: 2(G)FSK, 4(G)FSK, OOK and ASK. The air data rate is programmable from 0.1 to 500 kbps.
    The S2-LPTX meets the regulatory requirements applicable in territories worldwide, including Europe, Japan, China and the USA.

    Key Features

    • Frequency bands:
      • 413-479 MHz
      • 826-958 MHz
    • Modulation schemes:
      • 2(G)FSK, 4(G)FSK
      • OOK, ASK
    • Air data rate from 0.1 to 500 kbps
    • Ultra-low power consumption:
      • 10 mA TX @ +10 dBm
    • Programmable RF output power up to +16 dBm
    • Programmable channel spacing
    • Fast start-up and frequency synthesizer settling time
    • Battery indicator and low battery detector
    • TX 128 bytes FIFO buffers
    • 4-wire SPI interface
    • ST companion integrated filter chips are available
    • Fully integrated ultra-low power RC oscillator
    • Wake-up driven by internal timer or external event
    • Flexible packet length with dynamic payload length
    • IEEE 802.15.4g hardware packet support with whitening, FEC, CRC
    • Wireless M-BUS supported
    • Enables operations in the SIGFOX™ network
    • Suitable to build systems targeting:
      • Europe: ETSI EN 300 220, ETSI EN 303 131
      • US: FCC part 15 and part 90
      • Japan: ARIB STD T67, T108
      • China: SRRC
    • Operating temperature range: -40 °C to +105 °C

Recommended for you

All tools & software

    • Part number
      Status
      Description
      Type
      Supplier

      SensiSUB

      Active

      Connecting low-power SUB 1GHZ RF transceiver to the Cloud with fully customisable sensors, ARM® 32-bit Cortex®-M4 CPU and coin battery.

      Components and Modules SensiEDGE
      SensiSUB

      Description:

      Connecting low-power SUB 1GHZ RF transceiver to the Cloud with fully customisable sensors, ARM® 32-bit Cortex®-M4 CPU and coin battery.
    • Part number
      Status
      Description
      Type
      Supplier

      X-NUCLEO-S2868A2

      Active

      Sub-1 GHz 868 MHz RF expansion board based on S2-LP radio for STM32 Nucleo

      STM32 ODE Connect HW ST

      X-NUCLEO-S2915A1

      Active

      Sub-1 GHz 915 MHz RF expansion board based on S2-LP radio for STM32 Nucleo

      STM32 ODE Connect HW ST
      X-NUCLEO-S2868A2

      Description:

      Sub-1 GHz 868 MHz RF expansion board based on S2-LP radio for STM32 Nucleo
      X-NUCLEO-S2915A1

      Description:

      Sub-1 GHz 915 MHz RF expansion board based on S2-LP radio for STM32 Nucleo
    • Part number
      Status
      Description
      Type
      Supplier

      STSW-S2LP-DK

      Active

      Evaluation SW package based on S2-LP

      Evaluation Tool Software ST

      STSW-S2LP-SFX-DK

      Active

      Evaluation SW package based on S2-LP

      Evaluation Tool Software ST
      STSW-S2LP-DK

      Description:

      Evaluation SW package based on S2-LP
      STSW-S2LP-SFX-DK

      Description:

      Evaluation SW package based on S2-LP
    • Part number
      Status
      Description
      Type
      Supplier

      FP-ATR-SIGFOX1

      Active

      STM32Cube function pack for IoT tracker node with Sigfox™ connectivity, Bluetooth connectivity and sensors

      STM32 ODE Function Pack SW ST

      X-CUBE-SFXS2LP1

      Active

      Sigfox software expansion for STM32Cube based on S2-LP

      STM32Cube Expansion Packages ST

      X-CUBE-SUBG1

      Active

      Sub-1 GHz RF communication software expansion for STM32Cube

      STM32Cube Expansion Packages ST

      X-CUBE-SUBG2

      Active

      Sub-1 GHz RF communication software expansion for STM32Cube based on S2-LP

      STM32Cube Expansion Packages ST
      FP-ATR-SIGFOX1

      Description:

      STM32Cube function pack for IoT tracker node with Sigfox™ connectivity, Bluetooth connectivity and sensors
      X-CUBE-SFXS2LP1

      Description:

      Sigfox software expansion for STM32Cube based on S2-LP
      X-CUBE-SUBG1

      Description:

      Sub-1 GHz RF communication software expansion for STM32Cube
      X-CUBE-SUBG2

      Description:

      Sub-1 GHz RF communication software expansion for STM32Cube based on S2-LP
    • Part number
      Status
      Description
      Type
      Supplier

      STEVAL-FKI868V2

      Active

      Sub-1GHz (860-940 MHz) transceiver development kit based on S2-LP

      Communication and Connectivity Solution Eval Boards ST

      STEVAL-FKI915V1

      Active

      Sub-1GHz transceiver development kit based on S2-LP

      Communication and Connectivity Solution Eval Boards ST
      STEVAL-FKI868V2

      Description:

      Sub-1GHz (860-940 MHz) transceiver development kit based on S2-LP
      STEVAL-FKI915V1

      Description:

      Sub-1GHz transceiver development kit based on S2-LP
    • Part number
      Status
      Description
      Type
      Supplier

      HW Design Service

      Active

      Complete OEM solution from end to end.

      Engineering Services DiZiC

      SensiEDGE customization services

      Active

      End-to-end development services: Hardware, Firmware, Software development, Enclosure, Cloud and mobile APPs. Speed up your IoT project with SensiEDGE!

      Engineering Services SensiEDGE

      Short-Range-Devices Test Services

      Active

      Consulting, Test, Certification & Approval Services for Sub 1 GHz / SRD products

      Engineering Services 7Layers
      HW Design Service

      Description:

      Complete OEM solution from end to end.
      SensiEDGE customization services

      Description:

      End-to-end development services: Hardware, Firmware, Software development, Enclosure, Cloud and mobile APPs. Speed up your IoT project with SensiEDGE!
      Short-Range-Devices Test Services

      Description:

      Consulting, Test, Certification & Approval Services for Sub 1 GHz / SRD products

EDA Symbols, Footprints and 3D Models

STMicroelectronics - S2-LPTX

Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.

Symbols

Symbols

Footprints

Footprints

3D model

3D models

Quality and Reliability

Part Number Marketing Status Package Grade RoHS Compliance Grade Material Declaration**
S2-LPTXQTR
Active
QFN-24L Industrial Ecopack3

S2-LPTXQTR

Package:

QFN-24L

Material Declaration**:

Marketing Status

Active

Package

QFN-24L

Grade

Industrial

RoHS Compliance Grade

Ecopack3

(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.

Sample & Buy

Part Number
Order from Distributors
Order from ST
Marketing Status
ECCN (US)
ECCN (EU)
Packing Type
Package
Temperature (°C) Country of Origin
Budgetary Price (US$)*/Qty
min
max
S2-LPTXQTR Available at 4 distributors

Distributor availability ofS2-LPTXQTR

Distributor Name
Region Stock Min. Order Third party link
DIGIKEY WORLDWIDE 1779 1 Order Now
RS COMPONENTS EUROPE 500 1 Order Now
MOUSER WORLDWIDE 4955 1 Order Now
Farnell Element14 EUROPE 200 1 Order Now

Distributor reported inventory date: 2020-10-28

Distributor Name

DIGIKEY

Stock

1779

Min.Order

1

Region

WORLDWIDE Order Now

RS COMPONENTS

Stock

500

Min.Order

1

Region

EUROPE Order Now

MOUSER

Stock

4955

Min.Order

1

Region

WORLDWIDE Order Now

Farnell Element14

Stock

200

Min.Order

1

Region

EUROPE Order Now

Distributor reported inventory date: 2020-10-28

Free Sample Buy Direct
Active
EAR99 NEC Tape And Reel QFN-24L -40 105 PHILIPPINES 1.15 / 1k

S2-LPTXQTR

Marketing Status

Active

ECCN (US)

EAR99

Budgetary Price (US$)*/Qty

1.15 / 1k

Distributor availability ofS2-LPTXQTR

Distributor Name
Region Stock Min. Order Third party link
DIGIKEY WORLDWIDE 1779 1 Order Now
RS COMPONENTS EUROPE 500 1 Order Now
MOUSER WORLDWIDE 4955 1 Order Now
Farnell Element14 EUROPE 200 1 Order Now

Distributor reported inventory date: 2020-10-28

Distributor Name

DIGIKEY

Stock

1779

Min.Order

1

Region

WORLDWIDE Order Now

RS COMPONENTS

Stock

500

Min.Order

1

Region

EUROPE Order Now

MOUSER

Stock

4955

Min.Order

1

Region

WORLDWIDE Order Now

Farnell Element14

Stock

200

Min.Order

1

Region

EUROPE Order Now

Distributor reported inventory date: 2020-10-28

ECCN (EU)

NEC

Packing Type

Tape And Reel

Package

QFN-24L

Operating Temperature (°C)

(min)

-40

(max)

105

Budgetary Price (US$)* / Qty

1.15 / 1k

Country of Origin

PHILIPPINES

(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office  or our Distributors