STCH03

Active
Design Win Education

Offline PWM controller for low standby adapters

Download datasheet Order Direct

Product overview

Description

The STCH03 current-mode controller is designed for an offline quasi-resonant ZVS (zero-voltage-switching at switch turn-on) flyback converter.

It combines a high-performance low-voltage PWM controller chip and a 650V HV start-up cell in the same package.

Constant output voltage (CV) regulation loop is achieved by secondary side feedback, the output voltage information is transfered via an optocoupler on the FB pin of the STCH03 to get the selected output voltage.

The device features a unique characteristic: it is capable of providing constant output current regulation (CC) using primary-sensing feedback. This eliminates the need for dedicated current reference IC, as well as the current sensor, still maintaining quite accurate output current regulation.

The quasi-resonant operation is achieved by means of a transformer demagnetization sensing input that triggers the turn-on of the MOSFET, connected on the ZCD pin. This input serves also as both output voltage monitor, to achieve mains-independent CC regulation (line voltage feedforward), and to implement OVP and UVP.

The maximum switching frequency is top-limited below 154 kHz, so that at the medium-light load a special function automatically lowers the operating frequency whilst still maintaining the operation as close to ZVS as possible. At the very light load, the device enters a controlled burst-mode operation that, along with the zero-power high-voltage start-up circuit, the extremely low quiescent current of the device, helps minimize the residual input consumption, thus meeting the requirements of the most stringent standards.

During the burst-mode operation the VDD supply voltage has to be guaranteed by optimum application design. In any case, an innovative adaptive UVLO helps to minimize the issues related to the fluctuations of the auxiliary biasing voltage with the output load, due to parasitic capacitance of the transformer and further reducing the IC's bias consumption.

In addition to these functions that optimize power handling under different operating conditions, the device also offers the output overvoltage protection (OVP), overtemperature protection (OTP), hiccup-mode protection that is invoked when the transformer saturates or the secondary diode fails short and the output undervoltage protection (UVP) that limits the average output current in case of the output short-circuit. All the protections are auto-restart mode, except the OVP protection, that can be internally selected to be auto-restart or latched mode.

The embedded leading-edge blanking on the current sense input for greater noise immunity completes the equipment of this device.

  • All features

    • Advanced power management for ultra-low standby power consumption (under 10 mW at 230 VAC)
    • Fully integrated primary side constant current output regulation (CC)
    • 650 V embedded HV start-up circuit with zero power consumption.
    • Quasi-resonant (QR) zero-voltage-switching (ZVS) operation
    • Accurate and adjustable output OVP with options auto-restart (STCH03) or latched (STCH03L) after fault
    • Output undervoltage protection (UVP) with auto-restart
    • Input voltage feedforward compensation for mains-independent CC regulation
    • Embedded thermal shutdown
    • Intelligent frequency jitter for EMI suppression
    • SO8 package

eDesignSuite

eDesignSuite is a comprehensive set of easy-to-use design-aid utilities ready to help you streamline the system development process with a wide range of ST products.

Power Supply Design Tool

SMPS design, by topology, by type and by product
PFC design with analog and digitial control
Supports various PCB configurations
Power Supply
Choose type:
Input Specification
Input Specification
V
This option is required. And must be less than or equal to Volt. Max [V]
V
This option is required. And must be greater than or equal to Volt. Min [V]
Output
V
this option is required
A
this option is required
Output Power: 0

You might also like...

All tools & software

    • Part number
      Status
      Description
      Type
      Supplier

      EVAL-STCH03-45W

      Active

      45W / 12V power supply based on STCH03 QR flyback controller and SRK1000B adaptive synchronous rectification controller

      Power supplies and converters --
      EVAL-STCH03-45W

      Description:

      45W / 12V power supply based on STCH03 QR flyback controller and SRK1000B adaptive synchronous rectification controller

      EVL80WLED-STCH03

      Active

      EVL80WLED-STCH03: 80W-1A primary side current loop control LED driver with STCH03 for street lighting applications

      Power supplies and converters --
      EVL80WLED-STCH03

      Description:

      EVL80WLED-STCH03: 80W-1A primary side current loop control LED driver with STCH03 for street lighting applications

      EVLSTCH03-36W-SR

      Active

      36W USB charger with selectable output voltage (5-9-12 V @3A) based on STCH03L and SRK1000B

      Power supplies and converters --
      EVLSTCH03-36W-SR

      Description:

      36W USB charger with selectable output voltage (5-9-12 V @3A) based on STCH03L and SRK1000B

      EVLSTCH03-45WPD

      Active

      45W USB Type-C Power Delivery 3.0 adapter based on STCH03, SRK1001 and STUSB4761

      Power supplies and converters ST
      EVLSTCH03-45WPD

      Description:

      45W USB Type-C Power Delivery 3.0 adapter based on STCH03, SRK1001 and STUSB4761

      STEVAL-SMACH15V1

      Active

      15 W 5 V output USB adapter evaluation board with STCH03 CC-mode primary sensing switching controller

      Power supplies and converters ST
      STEVAL-SMACH15V1

      Description:

      15 W 5 V output USB adapter evaluation board with STCH03 CC-mode primary sensing switching controller

      STEVAL-USBPD27S

      Active

      Compact 27W USB Type-C? Power Delivery 3.1 with PPS adapter reference design

      Power supplies and converters ST
      STEVAL-USBPD27S

      Description:

      Compact 27W USB Type-C? Power Delivery 3.1 with PPS adapter reference design

      STEVAL-USBPD45C

      Active

      45 W USB Type-C™ Power Delivery adapter reference design based on STCH03, STM32F051 and STUSB1602A

      Power supplies and converters ST
      STEVAL-USBPD45C

      Description:

      45 W USB Type-C™ Power Delivery adapter reference design based on STCH03, STM32F051 and STUSB1602A

EDA Symbols, Footprints and 3D Models

STMicroelectronics - STCH03

Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.

Please select one model supplier :

Symbols

Symbols

Footprints

Footprints

3D model

3D models

Quality and Reliability

Part Number Marketing Status Package Grade RoHS Compliance Grade Material Declaration**
STCH03
Active
SO-8 Industrial Ecopack2
STCH03L
NRND
SO-8 Industrial Ecopack2
STCH03TR
Active
SO-8 Industrial Ecopack2

STCH03

Package:

SO-8

Material Declaration**:

PDF XML

Marketing Status

Active

Package

SO-8

Grade

Industrial

RoHS Compliance Grade

Ecopack2

STCH03L

Package:

SO-8

Material Declaration**:

Marketing Status

NRND

Package

SO-8

Grade

Industrial

RoHS Compliance Grade

Ecopack2

STCH03TR

Package:

SO-8

Material Declaration**:

PDF XML

Marketing Status

Active

Package

SO-8

Grade

Industrial

RoHS Compliance Grade

Ecopack2

(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.

Sample & Buy

Swipe or click the button to explore more details Don't show this again
Part Number
Marketing Status
Budgetary Price (US$)*/Qty
Order from ST
Order from distributors
Package
Packing Type
RoHS
Country of Origin
ECCN (US)
ECCN (EU)
STCH03TR
Available at distributors

Distributor availability of STCH03TR

Distributor Name
Region Stock Min. Order Third party link

Distributor reported inventory date:

No availability of distributors reported, please contact our sales office
STCH03
Available at distributors

Distributor availability of STCH03

Distributor Name
Region Stock Min. Order Third party link

Distributor reported inventory date:

No availability of distributors reported, please contact our sales office
STCH03L
Available at distributors

Distributor availability of STCH03L

Distributor Name
Region Stock Min. Order Third party link

Distributor reported inventory date:

No availability of distributors reported, please contact our sales office

STCH03TR Active

Budgetary Price (US$)*/Qty:
-
Package:
Packing Type:
RoHS:
Country of Origin:
ECCN (US):
ECCN (EU):

Part Number:

STCH03TR

Distributor Name

Distributor reported inventory date:

STCH03 Active

Budgetary Price (US$)*/Qty:
-
Package:
Packing Type:
RoHS:
Country of Origin:
ECCN (US):
ECCN (EU):

Part Number:

STCH03

Distributor Name

Distributor reported inventory date:

STCH03L NRND

Budgetary Price (US$)*/Qty:
-
Package:
Packing Type:
RoHS:
Country of Origin:
ECCN (US):
ECCN (EU):

Part Number:

STCH03L

Swipe or click the button to explore more details Don't show this again

(*) Suggested Resale Price (USD) per defined quantity for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors