-
The BlueNRG-M2 is a Bluetooth® low energy system-on-chip application processor certified module, compliant with BT specifications v5.0 and BQE qualified. The BlueNRG-M2 module supports multiple roles simultaneously and can act at the same time as Bluetooth master and slave device. The BlueNRG-M2 is based on the BlueNRG-2 system-on-chip and entire Bluetooth low energy stack and protocols are embedded into module. The BlueNRG-M2 module provides a complete RF platform in a tiny form factor. Radio, embedded antenna and high frequency oscillators are integrated to offer a certified solution to optimize the time-to-market of the final applications. The BlueNRG-M2 can be powered directly with a pair of AAA batteries or any power source from 1.7 to 3.6 V.
Key Features
- Bluetooth v5.0 compliant
- Supports master and slave modes
- Multiple roles supported simultaneously
- LE data packet length extension
- Embedded ST BlueNRG-2 BLE SoC
- High performance, ultra-low power Cortex-M0 32-bit based core
- Programmable embedded 256 kB Flash
- 24 kB embedded RAM with data retention
- Up to +8 dBm available output power
- Down to -88 dBm Rx sensitivity
- Up to 96 dB link budget with excellent link reliability
- Embedded BALF-NRG-02D3 integrated matched balun with harmonic filter
- Interfaces
- 1 x UART, 1 x I2C, 1xSPI, 14 x GPIO, 2 x multifunction timer, 10-bit ADC, watchdog and RTC, DMA controller, PDM stream processor, SWD debug interface
- On-board chip antenna (BLUENRG-M2SA) or PCB antenna (BLUENRG-M2SP)
- Small form factor: 11.5 mm x13.5 mm
- Complemented with Bluetooth low energy protocol stack library (GAP, GATT,SM, L2CAP, LL)
- AES security co-processor
- Bluetooth low energy SDK with a wide range of available profiles
- Certification
- CE qualified
- FCC, IC modular approval certified
- TYPE qualified
- BQE qualified
- Pre-programmed UART bootloader
- Operating supply voltage: from 1.7 to 3.6 V
- Operating temperature range: -40 °C to 85 °C
- Bluetooth v5.0 compliant
Sample & Buy
| Part Number | Package | Packing Type | Temperature (°C) | Marketing Status | ECCN (US) | Country of Origin | Budgetary Price (US$)*/Qty | Order from ST | Order from Distributors | |
|---|---|---|---|---|---|---|---|---|---|---|
| min | max | |||||||||
| BLUENRG-M2SA | BLUENRG-2 MODULE QFN, CHIP ANT | Tape And Reel | -40 | 85 | Active | 5A992C | SOUTH KOREA | 4.695 / 1k | Buy now | Check Availability |
| BLUENRG-M2SP | BLUENRG-2 MODULE QFN, PCB ANT | Tape And Reel | -40 | 85 | Active | 5A992C | SOUTH KOREA | 4.215 / 1k | Buy now | Check Availability |
(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors
Development Tools
Ecosystems
-
-
Picture Part number Manufacturer Description 
SensiBLE 2.1 SensiEDGE SensiBLE 2.1 SoM integrates a rechargeable Li-Ion battery, a variety of sensors, and a low power Cortex M0 core that executes Bluetooth protocols. Part NumberSensiBLE 2.1 SoM integrates a rechargeable Li-Ion battery, a variety of sensors, and a low power Cortex M0 core that executes Bluetooth protocols.
-
-
-
Picture Part number Manufacturer Description 
X-NUCLEO-BNRG2A1 ST Bluetooth Low Energy expansion board based on the BLUENRG-M2SP module for STM32 Nucleo Part NumberBluetooth Low Energy expansion board based on the BLUENRG-M2SP module for STM32 Nucleo
-
Evaluation Tools
-
-
Picture Part number Manufacturer Description 
STEVAL-IDB008V1M ST Evaluation platform based on the BlueNRG-M2SA module Part NumberEvaluation platform based on the BlueNRG-M2SA module
-
Support and Applications
| Part Number | Marketing Status | Package | Grade | RoHS Compliance Grade | Material Declaration** |
|---|---|---|---|---|---|
| BLUENRG-M2SA | Active | BLUENRG-2 MODULE QFN, CHIP ANT | Industrial | Ecopack2 | |
| BLUENRG-M2SP | Active | BLUENRG-2 MODULE QFN, PCB ANT | Industrial | Ecopack2 | |
BLUENRG-M2SA
Package:
BLUENRG-2 MODULE QFN, CHIP ANTMaterial Declaration**:
BLUENRG-M2SP
Package:
BLUENRG-2 MODULE QFN, PCB ANTMaterial Declaration**:
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
