Power supplies and converters - Products

15 V, 0.15 A buck converter using VIPer™ Plus - VIPer0P

Power supply evaluation board for LNB based on the LNBH26S

Power supply evaluation board for LNB based on the LNBH26S

5 V/4 A, synchronous flyback converter, Power Over Ethernet (PoE) - IEEE 802.3at compliant reference design

STC3117 evaluation board

Power supply evaluation board for LNB based on the LNBH25S

Power supply evaluation board for LNB based on the LNBH26LS

Power supply evaluation board for LNB based on the LNBH25S

Power supply evaluation board for LNB based on the LNBH25LS

STUSB4531 USB PD controller evaluation board

Demonstration board for STDRIVEG600 600V high-speed half-bridge gate driver with 150 mΩ, 650V e-mode GaN HEMT

Smart reset and power-on reference design based on STM6601

Demonstration board for STDRIVEG600 600V high-speed half-bridge gate driver with 115 mΩ, 600V MDmesh DM2 Power MOSFET

5 V - 12 V, 15 W double output isolated flyback converter based on VIPer37LE

STUSB4710 evaluation board USB PD controller with on-board DC-DC

Evaluation board for the SEA01 constant voltage and current controller with online digital trimming

7 kW on-board charger (OBC) reference design

Very high power density board - 65W multi-port (USB Type-C and USB Type-A) power delivery based on ST-ONEMP and MASTERGAN4

36 V, 1 A synchronous buck converter evaluation board based on DCP3601

19 V - 90 W adapter based on the STCMB1, TM PFC and HB LLC combo controller

Li-Ion battery charger evaluation board based on STNS01

Line interactive 450 W UPS reference design - 230 V / 50 Hz model

4 A peak, 800 kHz fixed-frequency PWM synchronous step-down demonstration board with enable on/off based on the ST1S40

19 V - 65 W quasi resonant flyback adapter board

15 V / 50 W QR flyback converter based on VIPERGAN50

Testing platform of SiC MOSFET for packages HU3PAK

38 V, 2 A synchronous step-down switching regulator evaluation board based on the L6986

12 V - 210 W adapter based on STCMB1, combo TM PFC and HB LLC

12 V - 0.6 A flyback isolated converter using VIPer™ Plus - VIPer0P

150 V - 1 A LED driver using STCMB1

1.5 A step down switching regulator (Vin=4 to 36 V, Vout=1.235 to Vin) based on L5972D

12 V/0.3 A step down DC/DC converter (VIN = 12 to 60 V) based on the L7983PUR regulator

Evaluation board based on DC-DC converter buck regulator A6983NQTR

Evaluation board based on DC-DC converter buck regulator A6983CQTR

90W ac-dc asymmetrical half bridge adapter using L6591 and L6563

Fast and easy migration from DC barrel to Type-C

High efficiency synchronous rectifier step-up converter demonstration board based on the L6920D

19 V - 90 W adapter with PFC for laptop computers using the L6563H and L6699

High efficiency synchronous rectifier step-up converter demonstration board based on the L6920DB

Solar battery charger for Li-Ion batteries

Power over Ethernet - PD converter with 3.3 V 3 A output, standard IEEE 802.3af compliant

Evaluation board based on ST1PS02AQTR 400 mA nano-quiescent synchronous step-down converter with AUX switch

Evaluation board based on ST1PS02BQTR 400 mA nano-quiescent synchronous step-down converter with AUX switch

Evaluation board based on ST1PS02CQTR 400 mA nano-quiescent synchronous step-down converter with AUX switch

Evaluation board based on ST1PS02DQTR 400 mA nano-quiescent synchronous step-down converter with AUX switch

0.7 A / 1.2 V synchronous buck converter with enable function based on the ST1S12XX

5 V / 0.6 A Buck converter based on VIPER319X

3.3 V/0.3 A step down DC/DC converter (VIN = 3.5 V to 60 V) based on the L7983PU33R

400 V - 24 V / 10.5 A DC-DC resonant LLC converter for industrial applications, using MasterGaN1L, L6599A, and SRK2001A

Double output SMPS for power line applications using the ALTAIR04-900 primary controller

High power inverse buck for dimmable LED application with MASTERGAN4, HVLED002 and VIPER06XS

USB to I2C/UART interface board for STNRG digital power controller products (STNRG01x and ST-ONE)

Up to 3 A step-down switching regulator based on the ST1S14

8.4 W / 30 W peak power offline flyback converter using VIPER38HD

Low standby losses power front-end with inrush current-limitation

3.3 V/6 A, synchronous flyback converter, Power Over Ethernet (PoE) - IEEE 802.3at compliant reference design

12 V/10 W isolated flyback converter based on VIPer25HD

Evaluation board for STBCFG01 single-cell Li+ battery charger with OTG boost, voltage mode fuel gauge and 200 mA LDO

3 A synchronous 900 kHz step-down DC-DC converter with inhibit function based on the ST1S10 (Power SO-8)

150 V - 150 W LED driver with the L6564H and the L6699 Transition Mode PFC Pre-regulator, Half Bridge LCC Resonant Converter

50 W wide-range high power factor flyback converter using the L6564

5 V-2 A, 115 kHz flyback with temporary extra-power management based on the VIPER28HN

75 V 15 A DC-DC converter buck regulator evaluation board with L3751 controller

Inrush current limiter for active AC-DC bridge rectifier

Li-Ion/Li-Po battery power management evaluation board based on STBC02

25 W wide-range high power factor buck-boost converter demonstration board using the L6564H

Auxiliary power supply in buck-boost topology based on the Viper06

Low THD-High Efficiency, 1KW Bridgeless CCM-PFC pre-regulator based on L4986A

38V, 10W synchronous iso-buck converter evaluation board based on L6983I

2 A, high efficiency single inductor buck-boost DC-DC converter and high brightness white LED driver based on the STBB3JCC

15 V / 100 mA high voltage buck converter reference design based on VIPER26K

3.3 V/3 A high efficiency step down DC-DC converter (VIN= 4.5 to 60 V) based on the L7987

0.7 A step-down switching regulator evaluation board based on the L5980

80 W high performance transition mode PFC evaluation board based on L6562A

12 V, 15 W (20 W peak) isolated flyback converter based on the VIPER38LE

4 A step-down switching evaluation board based on the ST1S50

45W USB Type-C Power Delivery 3.0 adapter based on STCH03, SRK1001 and STUSB4761

High efficiency synchronous step-down regulator based on the A6984

1.5 A / 3.3 V high frequency synchronous buck converter demonstration board based on the ST1S06

USB Type-C adapter to connect ST-ONE and ST-ONEMP with STEVAL-PCC020V2

Reference design 12.7 V/100 W flyback converter based on VIPERGAN100 for chargers and industrial applications

Evaluation board based on ST1PS03AQTR 400 mA nano-quiescent synchronous step-down converter with load switch

50 W QR open frame SMPS reference design with VIPerGaN50 and SRK1001

7 kW bidirectional AC-DC converter for ESS and industrial charger, full SiC-based

5.0 V / 0.3 A step down DC/DC converter (VIN = 5 to 60 V) based on the L7983PU50R regulator

3 A step-down switching power supply demonstration board based on the L7981 (QFN)

3 A step-down switching power supply demonstration board based on the L7981 (HSOP8)

Up to 5 cells BMS for industrial applications based on L9961

19 V-200 W adaptor reference design based on STCMB1, SGT120R65AL, SRK2001A and MASTERGAN1

Compact 27W USB Type-C? Power Delivery 3.1 with PPS adapter reference design

2 A step-down switching demonstration board based on the L7980

Li-Ion battery monitoring and gas gauge evaluation board based on STC3100

45W / 12V power supply based on STCH03 QR flyback controller and SRK1000B adaptive synchronous rectification controller

Power over Ethernet - PD converter with 12 V 1 A output, standard IEEE 802.3af compliant

PM8805 PoE powered device interface, evaluation board

300 W very high AC input voltage LED driver with digital power control

15 V/200 mA buck converter based on VIPER122

19 V - 200 W adapter reference design based on STCMB1, SRK2001A and MASTERGAN1

5 V / 100 mA high voltage optimized buck-converter based on VIPer013BLS

L5972D Up to 2A Step Down Switching Regulator Evaluation Board

5 W, 2-output wide-range buck converter based on the VIPER26LD

Evaluation board for STCC2540 USB charging controller

Evaluation board for STCC5021 USB charging controller attach detection

38 V, 2 A synchronous step-down switching regulator evaluation board based on the L6982CDR

45W QR USB PD adaptor reference design based on VIPerGaN50 and STUSB4761

38 V, 2 A synchronous step-down switching regulator evaluation board based on the L6982NDR

Up to 5 W solar battery charger with embedded MPPT based on SPV1040

30 kW Vienna PFC rectifier reference design with digital control

99.3% efficiency, 2 kW, 3-channel interleaved totem-pole PFC with resonant ZVS digital control

5 V/10 W, 60 kHz isolated flyback with extra power management based on the VIPer28L

Testing platform of SiC MOSFETs in HiP247-4 package

800 mA, 3 MHz, adjustable output high efficiency dual-mode buck-boost DC-DC converter based on the STBB2

12 V - 15 W quasi resonant flyback converter based on the VIPER35HD

5 V / 200 mA high voltage buck-converter based on VIPer01

19 V - 75 W SMPS compliant with latest Energy Star criteria using the L6563 and the L6566A

Evaluation board: SRK2001 adaptive synchronous rectification controller for LLC resonant converters with STP120N4F6

16 V-280 mA non isolated off-line high voltage converter based on the VIPer16H

2 A, 2 MHz, Vout = 3.3 V, high-efficiency dual-mode buck-boost DC-DC converter based on the STBB3J

3W, 5V output, isolated flyback converter using VIPer™ Plus - VIPER06HN

12 V - 4 W, 115 kHz isolated flyback based on the VIPer06

USB Type-C Power Delivery dual port adapter based on the STPD01 programmable buck converter

1.5 A step-down switching regulator demonstration board based on the L5983

1.5 W double output buck demonstration board based on the VIPER16LD

3 kW telecom rectifier reference design based on the STM32G474RBT6 digital power MCU

38 V, 5 W synchronous iso-buck converter evaluation board with dual isolated output based on the L6986I

6 kW high voltage DC-DC converter for EV charging

65W ACF USB PD adapter reference design with ST-ONE digital controller and MasterGaN2

STNRG388A evaluation board

12 V 140 mA 30 kHz non-isolated buck topology regulator based on VIPer06XN

15 V / 1.2 A SSR Flyback converter based on VIPer318L

Evaluation board for the STUSB4500 USB Power Delivery controller

Ultra wide range dual output back converter demonstration board based on the VIPER16

STUSB1600A Type-C™ controller evaluation board

STUSB4710A evaluation board (with on-board DC-DC)

15 kW, three-level, three-phase Vienna rectifier with digital control for power factor correction

1.5 A step-down switching regulator based on the L5973AD

Low-THD 350W CCM-PFC pre-regulator based on L4986

200 W LED driver using the STNRG012

Low-THD 350W CCM-PFC pre-regulator based on L4985

Solar panel harvesting system add on for STEVAL-ASTRA1B platform

15 kW, three-phase, three-level Active Front End (AFE) bidirectional converter for industrial and electric vehicle DC fast charging applications

15 kW, three-phase Vienna rectifier with low cost mixed-signal control for power factor correction

3 A synchronous 900 kHz step-down DC-DC converter with inhibit function based on the ST1S10 (DFN)

3 A / 1.5 MHz step-down synchronous switching regulator based on the ST1S31 in SO-8 package

11 kW bidirectional battery charger based on three phase two level PFC and isolated DC-DC converter

Demonstration board for MASTERGAN1 high power density half-bridge high voltage driver with two 650 V enhanced mode GaN HEMT

2 kW two-channel interleaved PFC reference design based on the STNRGPF12 digital controller with digital inrush current control

100 W, ultra-wide range flyback converter based on L6566BH

10 kW multi-level converter with dual channel MPPT

Evaluation board for STDRIVEG610 600 V high-speed half-bridge gate driver with 75 mΩ, 650 V e-mode GaN HEMT

500 W fully digital AC-DC power supply (D-SMPS) based on STM32F334C8 microcontroller

20 V/80 W flyback converter based on VIPERGAN100 for chargers and industrial applications

25 kW, dual active bridge bidirectional power converter for EV charging and battery energy storage systems

15 V/1.2 A isolated PSR Flyback converter based on VIPER31

Ki cordless kitchen transmitter evaluation kit

Evaluation board based on ST1PS01AJR 400 mA nano-quiescent synchronous step-down converter

Evaluation board based on the ST1PS01EJR 400 mA nano-quiescent synchronous step-down converter

Evaluation board based on ST1PS01DJR 400 mA nano-quiescent synchronous step-down converter

1.5 A step down switching regulator (VIN = 8 to 55 V) based on L4971

2 A DC step-down switching regulator with 4 V/36 V input voltage range based on the L5973D

Wide range isolated flyback demonstration board, single output 12 V/4.2 W based on the VIPer16LN

3 A / 1.5 MHz step-down synchronous switching regulator based on the ST1S31 in DFN 3x3 package

24 V / 65 W QR flyback converter based on VIPERGAN65W

Evaluation board based on DCP3603 - 36 V, 3 A synchronous buck converter in SOT23-6L

SRK1000A adaptive synchronous rectification controller for flyback converter demonstration board with logic level SR MOSFET

SRK1000B adaptive synchronous rectification controller for flyback

SRK1000 adaptive synchronous rectification controller for flyback

SRK1000A adaptive synchronous rectification controller for flyback converter demonstration board with STF80N10F7

SRK1000 adaptive synchronous rectification controller for flyback

SRK1000 adaptive synchronous rectification controller for flyback converter demonstration board with logic level SR MOSFET

Dual channel digital isolator evaluation board

Evaluation board for high integration STPMIC1x power management IC for microprocessor units

High efficiency DC-DC converter - compact solution based on L6738

Battery charger demonstration board with integrated power switch for Li-ION/Li-POLYMER based on the L6924D

350 W CCM PFC pre-regulator demonstration board based on the L4984D

EVL80WLED-STCH03: 80W-1A primary side current loop control LED driver with STCH03 for street lighting applications

15 V / 50 W QR flyback converter based on VIPERGAN50W

3.6 kW Totem Pole PFC with inrush current limiter reference design using TN3050H-12WY and SCTW35N65G2V

65 W QR USB PD adaptor reference design based on VIPERGAN65 and SRK1004

Resonant LCC 90 W notebook power adapter based on the L6599 and STP9NK50ZF

Offline power converter demonstration board using the Viper16

Wide range single-output demonstration board based on the VIPER37LE

Evaluation board for STDRIVEG611 600 V high-speed half-bridge gate driver with 75 mΩ, 650 V e-mode GaN HEMT

Inrush current solution with bypass SCR

12 V - 400 W adapter based on L4984, L6699 and SRK2001

5V/8A, synchronous flyback converter, Power over Ethernet (PoE) IEEE 802.3bt compliant reference design

12V/8A, active clamp forward converter, Power Over Ethernet (PoE) IEEE 802.3bt compliant reference design

100W 5V/20A active clamp forward converter based on PM8804 for telecom systems

3.3V/20A, active clamp forward converter, Power Over Ethernet (PoE) IEEE 802.3bt compliant reference design

45 W USB Type-C™ Power Delivery adapter reference design based on STCH03, STM32F051 and STUSB1602A

48 V flyback converter 12 V - 5 A based on PM8804

SRK1004x synchronous rectifier controller for non-complementary Active Clamp Flyback converter demonstration board with SR MOSFET

SRK1004x synchronous rectifier controller for non-complementary Active Clamp Flyback converter demonstration board with SR MOSFET

4 W, 12 V output, isolated flyback converter using VIPer™ Plus - VIPER06HS

SRK1004x synchronous rectifier controller for non-complementary Active Clamp Flyback converter demonstration board with SR MOSFET

250W TRANSITION-MODE PFC PRE-REGULATOR WITH L6563S

5 V, 0.85 A flyback converter using VIPer™ Plus - VIPer01

Testing platform for SiC based full bridge topology in ACEPACK 2 power module A2F20M65W3-FC

High efficiency 24 V , 250 W power adapter based on GaN and digital control

2 kW two-channel interleaved PFC reference design based on the STNRGPF02 digital controller

6 W dual output SMPS demonstration board based on the VIPER17

Energy harvesting Evaluation kit based on the SPV1050

Evaluation board for SPV1050 ULP energy harvester and battery charger - boost configuration

Three output isolated flyback converter for STCOMET smart meter and PLC system using VIPER267KDTR

Evaluation Board for SPV1050 ULP Energy Harvester and Battery Charger - Buck-Boost Configuration

Power Over Ethernet (PoE) - IEEE 802.3bt compliant interface reference design

MASTERGAN6 power module for high efficiency Half-Bridge-GaN-based power supply applications

4 A 850 kHz fixed-frequency PWM synchronous step-down demonstration board based on ST1S41IPHR (SO-8 ePad) with enable

4 A, 850 kHz fixed-frequency PWM synchronous step-down demostration board based on the ST1S41 in a VFQFPN package

Very high power density board 65W USB Type-C PD based on ST-ONE and MASTERGAN4

High power inverse buck for dimmable LED application with MASTERGAN4L, HVLED002 and VIPER06XS

Testing platform for SiC based triple boost (650 V, 49 mohm typ.) plus half-bridge topology (650 V, 23.5 mohm typ.) in ACEPACK 2 power module A2TBH45M65W3?FC

Digital power supply control board based on STM32F334

3 kW Full Bridge LLC resonant digital power supply evaluation kit

2 kW fully digital AC-DC power supply (D-SMPS) evaluation board

12 V - 5 W isolated flyback converter based on VIPer122LS

Power monitoring board of the kits STDES-IDS003V1 and STDES-IDS002V1

PV harvester (based on SPV1050) and wireless transmission board of the kit STDES-IDS002V1

Wireless receiver board of the kit STDES-IDS003V1 and STDES-IDS002V1

PTEG harvester (based on SPV1050) and wireless transmission board of the kit STDES-IDS003V1

2 A step-down switching demonstration board based on the L7985A in HSOP8 package

5 V/0.8 W wide-range 30 kHz buck converter based on the VIPer06XS

2 A step-down switching demonstration board based on the L7985 in DFN10 package

Digital power supply control board based on full pin-count STM32G474QET6

12 V - 400 W adapter based on L4985A, L6699 and SRK2001

SRK1004x synchronous rectifier controller for non-complementary Active Clamp Flyback converter demonstration board with SR MOSFET

4 A peak 800 kHz fixed-frequency PWM synchronous step-down demonstration board with enable on/off based on the ST1S40IPUR

3 A step-down switching demonstration board based on the L7986A in HSOP8 package

3 A step-down switching demonstration board based on the L7986 in DFN10 package

4 A peak 800 kHz fixed-frequency PWM synchronous step-down demonstration board with enable on/off based on the ST1S40IPHR

9.4 W, 15 V-5 V-3.3 V, three output isolated flyback converter for smart meter and power line systems using the VIPER26HD

19 V - 75 W laptop adapter with tracking boost PFC pre-regulator, using the L6563 and the L6566A

300 W peak power (170 W continuous power) LLC resonant converter based on L6699, STB13N60M2 and STPS20M80CG

Power management evaluation board based on the stepdown regulators L6981,L7983, ST1PS03, and the ST730 LDO

2 A / 3.3 V high-efficiency synchronous buck converter evaluation board based on the ST1S09I with inhibit

15 W 5 V output USB adapter evaluation board with STCH03 CC-mode primary sensing switching controller

SRK1001 adaptive synchronous rectification controller for flyback converter demonstration board with SR MOSFET

SRK1001 adaptive synchronous rectification controller for flyback converter demonstration board with SR MOSFET

SPI to isolated SPI dongle based on the L99BM1T transceiver

4 W non-insulated, wide input voltage range SMPS based on the VIPer16

140W USB-PD 3.1 EPR reference design based on ST-ONEHP

Dual linear voltage regulator evaluation board with configurable output voltage and diagnostic features based on automotive-grade L99VR02XP

7 W dual output offline flyback converter for home appliances using VIPer0P

ALTAIR05T-800 5 W wide range CV-CC optoless adapter evaluation board

Evaluation board based on the STEF01 fully programmable universal electronic fuse

Battery management system module based on L99BM114

Battery management system module based on L99BM114 and L99BM1T

Evaluation board for STDRIVEG212 220 V high-speed half-bridge gate driver with 2.2 mΩ, 100 V e-mode GaN HEMT

3300 W CCM boost PFC based on M5 MOSFET and L4985A

High-efficiency monolithic synchronous step-down regulator based on the L6928

High efficiency synchronous step-up regulator based on the L6926

High efficiency monolithic synchronous step-down regulator based on the L6928D

1500 VA, 48 Vdc to 230 Vac, DC-AC converter for UPS

USB-PD board with STACF01 controller

2 A step down DC - DC switching regulator (VIN = 4.5 V to 60 V) based on the L7987L

Fast and easy migration from DC barrel to Type-C

12 V - 150 W resonant converter with synchronous rectification based on L6563H, L6699 and SRK2001

12 V /1 A SMPS wide range demonstration board based on the VIPER26

Wide range non-isolated flyback demonstration board, single-output 12 V/4 W based on the VIPER06HN

Wide range single-output demonstration board based on the VIPER06HS

12 V, 150 mA non-isolated buck converter using VIPer™ Plus - VIPER06XS

Wide range single output demonstration board based on the VIPER26HN

Evaluation board for SRK2001 adaptive synchronous rectification controller for LLC resonant converter with high voltage external sensing MOSFETs

5 V - 360 mA buck converter based on VIPer222XSTR

38 V, 3 A synchronous step-down switching regulator evaluation board based on the L6983CQTR

38 V, 3 A synchronous step-down switching regulator evaluation board based on the L6983NQTR

5V/1.2A 12V/750mA double output flyback converter using VIPER37LD

Fast and easy migration from USB micro-B to Type-C

38 V, 2 A synchronous step-down switching regulator evaluation board based on L6986H

100 W transition-mode PFC pre-regulator demonstration board based on the L6564H

Wide input-range, single-output 5 V / 11 W power supply demonstration board based on the VIPer27

400 V - 24 V / 10.5 A DC-DC resonant LLC converter for industrial applications, using STNRG599A, MASTERGAN1L and SRK2001A

5V/20A, active clamp forward converter, Power Over Ethernet (PoE) - IEEE 802.3bt compliant reference design

Fast and easy migration from DC barrel to USB-C / PD

100W USB Power Delivery reference design based on VIPERGAN100

Demonstration board for STDRIVEG600 600 V high speed half-bridge gate driver with 75mΩ, 650 V e-mode GaN HEMT

65W compact board with STACF01 controller

3 kW three-channel interleaved PFC based on the STNRGPF01 digital controller

L6564 transition mode PFC evaluation board

Li-Ion/Li-Po battery power management evaluation board based on STBC03

Demonstration board for MASTERGAN2 high power density half-bridge high voltage driver with two 650V enhanced mode GaN HEMT

Demonstration board for MASTERGAN5 high power density half-bridge high voltage driver with two 650 V enhanced mode GaN HEMTs

Demonstration board for MASTERGAN3 high power density half-bridge high voltage driver with two 650 V enhanced mode GaN HEMTs

Demonstration board for MASTERGAN4 high power density half-bridge high voltage driver with two 650 V enhanced mode GaN HEMT

Evaluation board for the LD39020 High PSRR, 200mA LDO

38 V, 1.5 A synchronous step-down switching regulator evaluation board based on the L6981NDR for industrial power systems

38 V, 1.5 A synchronous step-down switching regulator evaluation board based on the L6981CDR for industrial power systems

Battery monitoring with alarm output for gas gauge applications based on the STC3115

200 W power supply based on STNRG011 digital combo for LED TV

Battery monitor demonstration board with alarm output for gas gauge applications based on the STC3105

12 V - 150 W power supply based on the STNRG011A digital combo and SRK2001 adaptive synchronous rectifier controller

35W WIDE RANGE HIGH POWER FACTOR FLYBACK CONVERTER USING THE L6562A

2.5 kW - 48 V battery charger reference design for industrial light electric vehicles (LEVs)

3.3 V/6 A automotive step down DC-DC converter (VIN up to 6 V) based on the DCP0606Y

Evaluation board for high integration STPMIC25 power management IC for microprocessor units

11 kW bidirectional battery charger based on three phase two level PFC and isolated DC-DC converter

Isobuck-boost converter with four selectable dual voltages

5 W dual isolated output, SIP7 compatible, isobuck-boost converter based on A6986I

Power supply for energy meter and power line modem based on the ALTAIR04-900

High efficiency synchronous step-down regulator based on the L6984

3 A / 2.3 MHz step-down synchronous switching regulator based on the AST1S31HF in a DFN 3x3 package

38 V - 2 A synchronous step-down switching regulator evaluation board based on the A6986

38 V, 0.5 A synchronous step-down switching regulator evaluation board based on A6985F

38 V, 1.5 A synchronous step-down switching regulator evaluation board based on A6986F3V3

7 W dual output flyback converter with standby managed by capacitive touch using VIPer0P and STM32L

12 V, 7.8 W isolated flyback converter based on VIPer114LS

38 V, 1.5 A synchronous step-down switching regulator evaluation board based on A6986F5V

5 V / 1.2 A non-isolated flyback converter using VIPerPlus-VIPer114LS

16 W triple output quasi resonant flyback converter for air conditioning applications using VIPer35LD

38 V, 0.5 A synchronous step-down switching regulator evaluation board based on A6985F5V

Double output isolated PSR flyback converter for smart meter and PLC systems using VIPER267KDTR

Two output isolated SSR flyback converter for smart meter and PLC systems using VIPER267KDTR

5 V / 0.36 A buck converter using VIPerPlus - VIPer11

MASTERGAN1L power module for high efficiency Half-Bridge-GaN-based power supply applications

MASTERGAN4L power module for high efficiency Half-Bridge-GaN-based power supply applications

Digital power supply control kit based on STM32G474RE

36W USB charger with selectable output voltage (5-9-12 V @3A) based on STCH03L and SRK1000B

12 V, 150 W power supply based on STNRG011 digital combo and SRK2001 adaptive synchronous rectifier controller

SRK1000B adaptive synchronous rectification controller for flyback

Power over Ethernet - PD converter with 5 V 2 A output, standard IEEE 802.3af compliant

1.5 A / 3.3 V step-down DC-DC converter demonstration board based on the ST1S03

38 V, 1.5 A synchronous step-down switching regulator evaluation board based on A6986F

24 V / 65 W reference design based on VIPERGAN65D

1 A, high efficiency single inductor DC-DC converter based on the STBB1-APUR

38 V, 10 W synchronous iso-buck converter for isolated applications

65 W USB Type-C Power Delivery reference design based on VIPERGAN65 and STUSB4761